Actes de conférence

La liste des actes de conférence est indicative et très probablement non-exhaustive.

2022

  1. Cuvillier, N., Ducousso, M., Cuenca, E., Berthe, L., Coulouvrat, F., Laser shock for NDT of composites materials and bonded joints: recent advances (2022) ECCM 2022 – Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability, 2, pp. 769-776.
  2. Mihaja Razafimbelo, Fabrice Gatuingt, Guillaume Hervé-Secourgeon, Marina Bottoni, Xavier Pinelli, Túlio Honório, Magdalini Titirla, Experimental validation of the strut-and-tie design for reinforced concrete massive structures by deformation flow analysis. fib International Congress 2022, Jun 2022, Oslo, Norway
  3. Craig Przybyla, Antoine Débarre, Jean-François Maire, Emmanuel Baranger, Frédéric Laurin. Scalar nonlinear continuum damage models for ceramic matrix composites with significant in plane ply anisotropy. ECCM20, Jun 2022, Lausanne, Switzerland
  4. Bastien Bodnar, Walid Larbi, Magdalini Titirla, Jean-François Deü, Fabrice Gatuingt, Frédéric Ragueneau, Modelling of a PsD hybrid test on a RC column/beam junction combining a multifibre beam model and a POD-ROM approach. Computational Modelling of Concrete Structures, Euro-C 2022, May 2022, Vienne, Austria. pp.414 – 423

2021

  1. Gong, C., Djouda, J.M., Hmima, A., Gaslain, F., Chemkhi, M., Maurer, T., Panicaud, B., 2D characterization at submicron scale of crack propagation of 17-4PH parts produced by Atomic Diffusion Additive Manufacturing (ADAM) process (2021) Procedia Structural Integrity, 34, pp. 13-19.
  2. Brot, G., Favier, V., Koutiri, I., Bonnand, V., Dupuy, C., Ranc, N., Lefebvre, F., Designing very high-cycle fatigue specimens of additively manufactured Ti-6Al-4V with different porosities and microstructures (2021) Procedia Structural Integrity, 38 (C), pp. 604-610.
  3. Bouaziz, M.A., Djouda, J.M., Chemkhi, M., Rambaudon, M., Kauffmann, J., Hild, F., Heat treatment effect on 17-4PH stainless steel manufactured by Atomic Diffusion Additive Manufacturing (ADAM) (2021) Procedia CIRP, 104, pp. 935-938.

2020

  1. Monaldo, E., Brach, S., Kondo, D., & Vairo, G. (2020). Effective constitutive behavior of heterogeneous materials comprising bimodular phases Lecture Notes in Mechanical Engineering, 595-605 https://doi.org/10.1007/978-3-030-41057-5_49
  2. Weisz-Patrault, D., Sakout, S., & Ehrlacher, A. (2020). Fast mesoscopic simulation of grain growth and macroscopic modeling. Paper presented at the AIP Conference Proceedings, , 2293 Article number 110007. https://10.1063/5.0026505
  3. Zhu, Z., Kham, M., Fernandes, V. A., & Lopez-Caballero, F. (2020). Dynamic response of a central clay core dam under two-component seismic loading.  Springer Series in Geomechanics and Geoengineering, 231-236

2019

  1. Chadefaux, D., & Le Carrou, J. -. (2019). Kinematical strategies during harpists’ performance. Paper presented at the Proceedings of the 26th International Congress on Sound and Vibration, ICSV 2019, Code 151920.
  2. Chaumun, E., Crépin, J., Duhamel, C., Guerre, C., Héripré, E., Sennour, M., & de Curières, I. (2019). Stress corrosion cracking initiation of alloy 82 in hydrogenated steam.  Code 151920.  https://10.1007/978-3-030-04639-2_11
  3. Huang, Q., Charles, Y., Duhamel, C., Gaspérini, M., & Crépin, J. (2019). Influence of the combination of microstructure and mechanical fields on stress corrosion cracking initiation of cold-worked austenitic stainless steels. Paper presented at the 19th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors, EnvDeg 2019, 967-978.
  4. Magne, S., Rougeault, S., Desmarchelier, R., Chaudat, T., Vasic, S., Wang, F., . . . Voldoire, F. (2019). In situ distributed strain monitoring of a small-scale reinforced concrete structure using combined FBG/OFDR fiber optics sensing for assessment of its seismic degradation mechanisms. Paper presented at the Structural Health Monitoring 2019: Enabling Intelligent Life-Cycle Health Management for Industry Internet of Things (IIOT) – Proceedings of the 12th International Workshop on Structural Health Monitoring, , 2 2557-2564. https://10.12783/shm2019/32400

2018

  1. Barjhoux, P. -., Diouane, Y., Grihon, S., Bettebghor, D., & Morlier, J. (2018). A bilevel methodology for solving a structural optimization problem with both continuous and categorical variables. 2018 Multidisciplinary Analysis and Optimization Conference, Article number AIAA 2018-3579, 16p https://doi.org/10.2514/6.2018-3579
  2. Bouchard, P. -., Navas, V. T., Shakoor, M., Morgeneyer, T., Buljac, A., Helfen, L., et al. (2018). Recent advances in finite element modelling of ductile fracture at mesoscale. Procedia Manufacturing, , 15, 39-45. https://doi.org/10.1016/j.promfg.2018.07.167
  3. Buljac, A., Helfen, L., Hild, F., & Morgeneyer, T. F. (2018). Early strain localization in strong work hardening aluminum alloy (2198 T3): 3D laminography and DVC measurement. Conference Proceedings of the Society for Experimental Mechanics Series, , 3 15-17. https://doi.org/10.1007/978-3-319-63028-1_3
  4. Chaumun, E., Crépin, J., Duhamel, C., Guerre, C., Héripré, E., Sennour, M., & de Curières, I. (2018). Stress corrosion cracking initiation of alloy 82 in hydrogenated steam , Minerals, Metals and Materials Series, Part F9, 175-189. https://doi.org/10.1007/978-3-030-04639-2_11
  5. Huang, Q., Charles, Y., Duhamel, C., Gasperini, M., & Crepin, J. (2018). Mechanical fields on cross-shaped specimens for stress corrosion cracking of cold-worked austenitic stainless steels , Materials Science Forum, 941, 1722-1727. https://doi.org/10.4028/www.scientific.net/MSF.941.1722
  6. Szmytka, F., Osmond, P., Rémy, L., Masson, P. -., & Forré, A. (2018). Automotive cylinder heads: Recent advances on thermal-mechanical fatigue design and upcoming challenges. MATEC Web of Conferences, 165 https://doi.org/10.1051/matecconf/201816517003
  7. Turque, I., Chosson, R., Le Saux, M., Brachet, J. -., Vandenberghe, V., Crépin, J., & Gourgues-Lorenzon, A. -. (2018). Mechanical behavior at high temperatures of highly oxygen-or hydrogen-enriched α and prior-β phases of zirconium alloys. ASTM Special Technical Publication, STP 1597 240-280. https://doi.org/10.1520/STP159720160063
  8. Wang, Y., Charbal, A., Hild, F., & Vincent, L. (2018). High cycle thermal fatigue of austenitic stainless steel. MATEC Web of Conferences, 165 , Article number 19009 https://doi.org/10.1051/matecconf/201816519009

2017

  1. Bouchard, P. -., Navas, V. T., Shakoor, M., Bernacki, M., Morgeneyer, T., Buljac, A., & Hild, F. (2017). Numerical modeling of ductile fracture at the microscale combined with X-ray laminography and digital volume correlation. AIP Conference Proceedings, 1896, Article number 160016. https://doi.org/10.1063/1.5008191
  2. Buljac, A., Taillandier-Thomas, T., Morgeneyer, T. F., Helfen, L., Roux, S., & Hild, F. (2017). In situ observation of strained bands and ductile damage in thin AA2139-T3 alloy sheets Procedia IUTAM, 20, 66-72. https://doi.org/10.1016/j.piutam.2017.03.009
  3. Charbal, A., Dufour, J. -., Hild, F., Roux, S., Poncelet, M., & Vincent, L. (2017). Hybrid stereocorrelation for 3D thermomechanical field measurements. Conference Proceedings of the Society for Experimental Mechanics Series,3, 83-88. https://doi.org/10.1007/978-3-319-41600-7_10
  4. Leguillon, D., Li, J., & Martin, E. (2017). Multi-cracking of brittle coatings under a mechanical loading. ICF 2017 – 14th International Conference on Fracture, 1, 401-402.
  5. Morgeneyer, T. F., Taillandier-Thomas, T., Buljac, A., Helfen, L., & Hild, F. (2017). Strain and damage interactions during ductile tearing: In situ 3D experiments. ICF 2017 – 14th International Conference on Fracture,2 , 332-333.
  6. Tanné, E., Bourdin, B., Li, T., Marigo, J. -., & Maurini, C. (2017). Crack initiation in variational phase field models of fracture. ICF 2017 – 14th International Conference on Fracture, 2, 964-965.
  7. Wang, L., Bornert, M., & Chancole, S. (2017). Microscopic investigation of the deformation mechanisms of argillaceous rock. Paper presented at the Poromechanics 2017 – Proceedings of the 6th Biot Conference on Poromechanics, 1458-1465. https://doi.org/10.1061/9780784480779.181

2016

  1. Lavazec, D., Cumunel, G., Duhamel, D., Soize, C., & Batou, A. (2016). Nonlinear microstructured material to reduce noise and vibrations at low frequencies. Paper presented at the Journal of Physics: Conference Series, , 744(1) https://doi:10.1088/1742-6596/744/1/012190
  2. Audebert, S., Batou, A., Daouk, S., Soize, C., and Louf, F. (2016). Estimer l’incertitude de modèles en dynamique des structures industrielles. In 13e Congrès Français d’Acoustique et 20ème Colloque VIbrations, SHocks and NOise 2016, (Le Mans, France), pp. 1–6

2015

  1. BRISARD S., CHAMOIN L., A posteriori error estimators for FFT based numerical techniques, in : MAI Workshop and training session : Micromechanics of cementitious materials, sept 2015, Ecuelles
  2. CARUEL M., TRUSKINOVSKY L., Huxley Simmons model revisited, in : 4th international conference on computational and mathematical biomedical engineering, CMBE 2015, juin 2015, Paris, 4 p.
  3. Chaumun E., Crepin J., Duhamel C., Guerre C., Heripre E., et al. SCC crack initiation in nickel based alloy welds in hydrogenated steam at 400°C, in : 17th international conference on environmental degradation of materials in nuclear power systems – water reactors, aout 2015, Ottawa, 19 p.http://dx.doi.org/10.1007/978-3-319-67244-1_11
  4. GOSSELET P., RIXEN D., SPILLANE N., ROUX F.X., Ensuring robustness of domain decomposition methods by block strategies, in : CIGOS 2015 innovation in construction, 2015, Cachan
  5. Marti, N., Favier, V., Saintier, N., & Gregori, F. (2015). Investigating fatigue frequency effects on single phase ductile materials Procedia Engineering, 133 294-298. https://doi.org/10.1016/j.proeng.2015.12.675
  6. Nguyen T.T., Yvonnet , Zhu Q., Bornert M., Chateau C., Phase field modeling of complex microcracking in voxel based models of cementitious materials, in : 13th US national congress on computational mechanics (USNCCM13), juillet 2015, San Diegohttps://doi.org/10.1016/j.cma.2015.10.007
  7. OTANO N., DURVILLE D., NERON D., HODEL U., MIKEL U., A piecewise model order reduction method for the simulation of the nonlinear behavior of wire ropes, in : 13th US national congress on computational mechanics, juillet 2015, San Diego
  8. Rapti, I., Foucault, A., Voldoire, F., Lopez-Caballero, F., & Modaressi-Farahmand-Razavi, A. (2015). Strain localization of a soil column due to seismic loading. Proceedings of the 14th Int. Conference of International Association for Computer Methods and Recent Advances in Geomechanics, IACMAG 2014, 347-352.
  9. Rapti, I., Lopez-Caballero, F., Modaressi-Farahmand-Razavi, A., Foucault, A., & Voldoire, F. (2015). Seismic evaluation of embankment-type structures with coupled hydro-mechanical model COMPDYN 2015 – 5th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 251-261. https://doi.org/10.7712/120115.3394.634
  10. Soize, C., Desceliers, C., Guilleminot, J., Le, T. T., Nguyen, M. T., Perrin, G., . . . Funfschilling, C. (2015). Stochastic representations and statistical inverse identification for uncertainty quantification in computational mechanics. 1st ECCOMAS Thematic Conference on Uncertainty Quantification in Computational Sciences and Engineering, 1-26. https://doi.org/10.7712/120215.4249.527
  11. Taillandier-Thomas, T., Morgeneyer, T., Roux, S., & Hild, F. (2015). On the use of regularized DVC to analyze strain localization. Conference Proceedings of the Society for Experimental Mechanics Series, 3B 161-166. https://doi.org/10.1007/978-3-319-06986-9_17
  12. TRAN V.P., GUILLEMINOT J., BRISARD S., SAB K., Homogénéisation numérique à l’aide de modèles prior de la raideur mésoscopique : identification et validation, in : 22ème congrès français de mécanique, aout 2015, Lyon
  13. Weisz-Patrault, D., Ehrlacher, A., Legrand, N., & Mathey, E. (2015). Non-linear numerical simulation of coiling by elastic finite strain model. International ESAFORM Conference on Material Forming, ESAFORM 2015, 651-653,1060-1065. https://doi.org/10.4028/www.scientific.net/KEM.651-653.1060

2014

  1. ATTIA H., DURVILLE D., LE TALLEC P., Multi scale modelling of the mechanical behaviour of textile reinforcements, in : 11ème world congress on computational mechanics (WCCM XI), juillet 2014, Barcelone, Computational mechanics (USNCCM13), juillet 2015, San Diego
  2. Béchade, J. L., Toualbi, L., Bosonnet, S., Castelnau, O., & De Carlan, Y. (2014). Macroscopic and microscopic determinations of residual stresses in thin oxide dispersion strengthened steel tubes. Materials Science Forum, International Conference on Residual Stresses, ICRS 2012, 768-769, 296-303 https://doi.org/10.4028/www.scientific.net/MSF.768-769.296
  3. Dufrenoy, S., Chauveau, T., Brenner, R., Fontugne, C., & Bacroix, B. (2014). Modeling methodology for stress determination by XRD in polycrystalline materials , Advanced Materials Research, 9th European Conference on Residual Stresses, ECRS 2014, 996, 106-111. https://doi.org/10.4028/www.scientific.net/AMR.996.106
  4. GUILHEM Y., LI J., PROUDHON H., LUDWIG W., Analysis of short fatigue crack propagation by 3D synchrotron imaging technique, in : International conference on fatigue damage of structural materials X, Hyannis, septembre 2014
  5. Guilhem, Y., Basseville, S., Proudhon, H., & Cailletaud, G. (2014). Effects of surface roughness on plastic strain localization in polycrystalline aggregates. MATEC Web of Conferences, 12 , Article number 06009. https://doi.org/10.1051/matecconf/20141206009
  6. GUINARD C., GUIPONT V., JEANDIN M., MONTAY G., GIRARDOT J. et al., Study of the residual stress distribution of thermally sprayed TBCs involving various interfaces and laser drilling, in : ITSC 2014, mai 2014, Barcelone, DVS, p. 500-505, 2014
  7. HUMBERT T., JOSSERAND C., TOUZE C., CADOT O., Phenomenological model for predicting stationary and non stationary spectra of wave turbulence in vibrating plates, European nonlinear dynamics conference ENOC 2014, juillet 2014, Vienne
  8. Julan, E., Taheri, S., Stolz, C., Peyre, P., & Gilles, P. (2014). Numerical simulation of laser shock peening in presence of weld for fatigue life design. American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, 3 https://doi.org/10.1115/PVP2014-28400
  9. Kpogan, K., Tampango, Y., Zahrouni, H., Potier-Ferry, M., & Ben Dhia, H. (2014). Computing flatness defects in sheet rolling by arlequin and asymptotic numerical methods, Key Engineering Materials, Conference of the European Scientific Association on Material Forming, ESAFORM 2014, 611-612, 186-193. https://doi.org/10.4028/www.scientific.net/KEM.611-612.186
  10. Locq D., Naze L., Franchet J.M. , Caron P., Dumont A., et al. Metallurgical optimisation of PM superalloy N19, in : Eurosuperalloys 2014, – 2nd European Symposium on Superalloys and their Applications mai 2014, Giens, 6 p. Volume 14, article number 11007 https://doi.org/10.1051/matecconf/20141411007
  11. MBALLA MBALLA F., YASTREBOV V., HOUZE F., CAILLETAUD G., NOEL S., PROUDHON H., TESTE P., Multiscale modeling of electrical contacts, in : MPMS 2014, International colloquium of mechanics, Palaiseau, octobre 2014
  12. Otsuka, T., Brenner, R., & Bacroix, B. (2014). FFT-based modelling of transformation plasticity in polycrystalline materials during diffusive phase transformation . Key Engineering Materials, International Conference on Metal Forming 2014, 622-623, 687-697. https://doi.org/10.4028/www.scientific.net/KEM.622-623.687
  13. POIRION F., ZENTNER I., Dynamic response of structures to random excitation, in : 9th international conference on structural dynamics EURODYN 2014, juin 2014, Porto
  14. Rapti, I., Foucault, A., Lopez-Caballero, F., & Modaressi-Farahmand-Razavi, A. (2014). Strain localization of a road embankment founded on soil substratum due to seismic loading. Proceedings of the International Conference on Structural Dynamic , EURODYN, 2014, 681-687.
  15. Sauzay, M., Liu, J., Rachdi, F., Signor, L., Ghidossi, T., & Villechaise, P. (2014). Physically-based simulations of the cyclic behavior of FCC polycrystals. Advanced Materials Research, 11th International Fatigue Congress, FATIGUE 2014,  891-892, 833-839. https://doi.org/10.4028/www.scientific.net/AMR.891-892.833
  16. Suhett Helmer, G., Sulem, J., Ghabezloo, S., Rohmer, J., & Hild, F. (2014). Experimental evaluation of the fracture toughness on a limestone. Proceedings of EUROCK 2014, ISRM European Regional Symposium, 217-221.
  17. YASTREBOV V., ANCIAUX G., MBALLA MBALLA F., CAILLETAUD G., MOLINARI J.F., et al., Multi physical contact between elastic and elasto plastic solids with fractal surfaces, in : Proceedings of the 7th international conference on multiscale materials modeling, Berkeley, octobre 2014

2013

  1. Abdelmoula, R., Debruyne, G., & Li, J. (2013). Matched asymptotic expansions in an elastic-creeping material : A new view on the hui-riedel equation. 13th International Conference on Fracture 2013, ICF 2013, 5 3578-3586.
  2. ATTIA H., DURVILLE D., LE TALLEC P., Modélisation multi-échelles du comportement des câblés textiles, in : CSMA 2013, 11ème colloque national en calcul des structures, 13-17 mai 2013, Giens, 8 p.
  3. ATTIA H., DURVILLE D., BEN DHIA H., LE TALLEC P., Multiscale approach to the modellings of dense fibrous media based on the development of an appropriate contact law at macroscopic scale, in : Contact mechanics international symposium, février 2013, Abu Dhabi
  4. BAYDOUN I., SAVIN E., COTTEREAU R., CLOUTEAU D., GUILLEMINOT J., Anisotropic transport and diffusion of elastic waves in random media, in : 2nd ECCOMAS yound investigators conference (YIC 2013), septembre 2013, Bordeaux
  5. BERNACHY BARBE F., GELEBART L., CREPIN J., BORNERT M., Caractérisation et modélisation du comportement mécanique de matériaux composites SiC/SiC, in : CSMA 2013, 11ème colloque national en calcul des structures, 13-17 mai 2013, Giens, 7 p.
  6. CHAUMUN E., GUERRE C., HERIPRE E., SENNOUR M., CREPIN J., DUHAMEL C., CURIERES I. De, Etude de l’amorçage en corrosion sous contrainte d’alliages à base de nickel soudés : influence des paramètres microstructuraux, in : Hydrogène-matériaux, corrosion sous contrainte, fatigue corrosion, Journées jeunes chercheurs 2013, La Rochelle, 26-27 juin 2013, Presses des mines, 2013, p. 29-33
  7. CHAUMUN E., CREPIN J., CURIERES I. De, DUHAMEL C., GUERRE C., et al., Initiation of SCC crack in nickel based weld metals : influence of microstructure features, in : 6th International conference on environmental degradation of materials in nuclear power systems – water reactors, aout 2013, Ashville, 18 p., 2013
  8. Chosson, R., Vandenberghe, V., Gourgues-Lorenzon, A. -F., Crépin, J., Bracher, J. -C., Cabrera, A., & Garat, V. (2013). Creep behavior at high temperature of the oxygen stabilized zirconium alpha phase of fuel cladding tubes oxidized in loca conditions. LWR Fuel Performance Meeting, Top Fuel 2013, 1, 520-527.
  9. Debruyne, G., & Abdelmoula, R. (2013). Hamiltonian analysis applied to the dynamic crack growth and arrest in a double cantilever beam. 13th International Conference on Fracture 2013, ICF 2013, 7, 5782-5791.
  10. Djaziri, S., Faurie, D., Le Bourhis, E., Goudeau, P., Renault, P. -O., Mocuta, C., et al. (2013). Deformation modes of nanostructured thin film under controlled biaxial deformation. Thin Solid Films, 530, 30-34. https://doi.org/10.1016/j.tsf.2012.05.051
  11. Esnault, J. -., Doquet, V., & Massin, P. (2013). Analysis of the transition from flat to slanted fatigue crack growth in thin metallic sheets. 13th International Conference on Fracture 2013, ICF 2013, 3, 1860-1869.
  12. GOSSELET P., REY V., PARRET FREAUD A., REY C., Blending verification in domain decomposition methods to achieve high quality simulations without over solving, in : YIC 2013, 2nde ECCOMAS Young investigators conference, septembre 2013, Bordeaux, 4 p.
  13. Guennec, Y. L., Savin, É., & Clouteau, D. (2013). A time-reversal process for beam trusses subjected to impulse loads. Journal of Physics: Conference Series, 464(1) , Article number 012001. https://doi.org/10.1088/1742-6596/464/1/012001
  14. Guerre, C., Chaumun, E., Crépin, J., De Curières, I., Duhamel, C., Héripré, E., . . . Vaillant, F. (2013). Stress corrosion cracking of nickel base alloys in PWR primary water. EPJ Web of Conferences, 51, Article number 04003. https://doi.org/10.1051/epjconf/20135104003
  15. LE MILLIER M., CALONNE O., CREPIN J., DUHAMEL C., FOURNIER L., et al. Influence of strain localization on IASCC of proton irradiated 304L stainless steel in simulated PWR primary water, in : 6th International conference on environmental degradation of materials in nuclear power systems – water reactors, aout 2013, Ashville, 16 p., 2013
  16. Moradi, A., Huchette, C., Vandellos, T., & Leguillon, D. (2013). Proposal of a cohesive zone model suitable for the study of bonded joints. ICCM International Conferences on Composite Materials, 2013, 2909-2920.
  17. Morgeneyer, T. F., Helfen, L., & Hild, F. (2013). Feasibility study of 3D digital volume correlation of synchrotron radiation laminography data for displacement field measurement during ductile crack initiation. Conference Proceedings of the Society for Experimental Mechanics Series, , 3, 211-215. https://doi.org/10.1007/978-1-4614-4235-6_29
  18. Nieto Ferro, A., Greffet, N., Devésa, G., & Clouteau, D. (2013). Accounting for nonlinear dynamic soil-structure interaction in earthquake engineering. ECCOMAS Thematic Conference – COMPDYN 2013: 4th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Proceedings – an IACM Special Interest Conference, 4538-4544.
  19. Phung, N. L., Blanche, A., Ranc, N., Favier, V., Chrysochoos, A., Marti, N., . . . Thoquenne, G. (2013). Very high cycle fatigue for single phase ductile materials: Microplasticity and energy dissipation. 13th International Conference on Fracture 2013, ICF 2013, 6, 5113-5121.
  20. Phung, N. L., Marti, N., Blanche, A., Ranc, N., Favier, V., Chrysochoos, A., . . . Thoquenne, G. (2013). Very high cycle fatigue for single phase ductile materials: Slip band appearance criterion. Procedia Engineering, 66, 615-625. https://doi.org/doi:10.1016/j.proeng.2013.12.113
  21. Pouzet, S., Peyre, P., Castelnau, O., Gorny, C., & Colin, C. (2013). Direct metal deposition of titanium matrix composites: Optimization of the process and microstructural analysis. ICALEO 2013 – 32nd International Congress on Applications of Lasers and Electro-Optics, 392-399. https://doi.org/10.2351/1.5062906
  22. RANCOURT V.R., AMMAR K., APPOLAIRE B., BUSSO E., FOREST S., Modelling stress diffusion controlled phase transformations : application to stress corrosion cracking, in : CSMA 2013, 11ème colloque national en calcul des structures, 13-17 mai 2013, Giens, 8 p.
  23. RANCOURT V.R., FOREST S., BUSSO E., APPOLAIRE B., AMMAR K., Modélisation de l’oxydation par la méthode des champs de phases, in : Hydrogène-matériaux, corrosion sous contrainte, fatigue corrosion, Journées jeunes chercheurs 2013, La Rochelle, 26-27 juin 2013, Presses des mines, 2013, p. 129-134
  24. Shen, W. Q., He, Z., Dormieux, L., & Kondo, D. (2013). Effective strength of saturated double porous media with a drucker-prager solid phase. Poromechanics V – Proceedings of the 5th Biot Conference on Poromechanics, 1903-1912. https://doi.org/10.1061/9780784412992.225
  25. Vincent, L., Poncelet, M., Roux, S., Hild, F., & Farcage, D. (2013). Experimental facility for high cycle thermal fatigue tests using laser shocks. Procedia Engineering,66, 669-675. https://doi.org/10.1016/j.proeng.2013.12.119
  26. Wang, L., Bornert, M., & Chanchole, S. (2013). Micro-scale experimental investigation of deformation and damage of argillaceous rocks under hydric and mechanical loads. Poromechanics V – Proceedings of the 5th Biot Conference on Poromechanics, 1635-1643. https://doi.org/10.1061/9780784412992.193

2012

  1. Arlazarov, A., Hazotte, A., Bouaziz, O., Gouné, M., & Kegel, F. (2012). Characterization of microstructure formation and mechanical behavior of an advanced medium mn steel. Materials Science and Technology Conference and Exhibition 2012, MS and T 2012, 2, 1124-1131.
  2. Arlazarov, A., Hazotte, A., Bouaziz, O., Gouné, M., & Kegel, F. (2012). Characterization of microstructure formation and mechanical behavior of an advanced medium mn steel. AIST Steel Properties and Applications Conference Proceedings – Combined with MS and T’12, Materials Science and Technology 2012, 327-336.
  3. Belmeguenai, M., Berling, D., Garreau, G., Chrif, S. M., Faurie, D., Seiler, W., & Moch, P. (2012). Static and dynamic magnetic properties of epitaxial fe 1.7 ge thin films grown on ge(111). Journal of Applied Physics, 111(7) https://doi.org/10.1063/1.3672396
  4. Bourcier, M., Dimanov, A., Héripré, E., Raphanel, J. L., Bornert, M., & Desbois, G. (2012). Full field investigation of salt deformation at room temperature: Cooperation of crystal plasticity and grain sliding. Mechanical Behavior of Salt VII – Proceedings of the 7th Conference on the Mechanical Behavior of Salt, 37-43.
  5. GUINARD C., GUIPONT V., JEANDIN M., MORGENEYER T., PROUDHON H., GIRARDOT J., SCHNEIDER M., HELFEN L., Analyse non destructive des défauts engendrés par le perçage laser des barrières thermiques, in : LASERAP’7, Ile d’oléron, 1-5 octobre 2012, p. 288-293
  6. JEHEL P., IBRAHIMBEGOVIC A., LEGER P., Efficient inelastic fiber frame element and consistent damping model for seismic time history analyses, in : 15th world conference on earthquake engineering (WCEE 2012), sept 2012, Lisbonne, 9 p.
  7. Nifa, A., Berthe, L., Boustie, M., Descurninges, L. -., Jeandin, M., Bénier, J., & Mercier, P. (2012). On the interaction of the particles of tantalum with a substrate of copper in the cold spray bonding process. ICALEO 2012 – 31st International Congress on Applications of Lasers and Electro-Optics, 633-639.
  8. Otsuka, T., Brenner, R., & Bacroix, B. (2012). Numerical modelling of transformation plasticity in steels by considering greenwood-johnson effect. TMP 2012 – 4th International Conference on Thermomechanical Processing of Steels,
  9. Petit, J., Bornert, M., Hofmann, F., Robach, O., Micha, J. S., Ulrich, O., et al. (2012). Combining laue microdiffraction and digital image correlation for improved measurements of the elastic strain field with micrometer spatial resolution. Procedia IUTAM, , 4 133-143. https://doi.org/10.1016/j.piutam.2012.05.015
  10. Prudhomme, S., Bouclier, R., Chamoin, L., Dhia, H. B., & Oden, J. T. (2012). Analysis of an averaging operator for atomic-to-continuum coupling methods by the arlequin approach , Lecture Notes in Computational Science and Engineering, on Numerical Analysis and Multiscale Computations, 82, 369-400 https://doi.org/10.1007/978-3-642-21943-6_15
  11. Prudhomme, S., Oden, J. T., Chamoin, L., & Dhia, H. B. (2012). Adaptive modeling and simulation for coupling methods. ECCOMAS Thematic Conference – ADMOS 2011: International Conference on Adaptive Modeling and Simulation, an IACM Special Interest Conference, 27-36.
  12. Rouffié, A. L., Fournier, B., Wident, P., Ziolek, L., Delabrouille, F., Tanguy, B., . . . Pineau, A. (2012). Influence of the microstructure on the fracture mechanisms of ODS ferritic steels. 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012,
  13. Suquet, P., Moulinec, H., Castelnau, O., Montagnat, M., Lahellec, N., Grennerat, F., et al. (2012). Multi-scale modeling of the mechanical behavior of polycrystalline ice under transient creep. Procedia IUTAM, 3, 76-90. https://doi.org/10.1016/j.piutam.2012.03.006
  14. Thénint, T., Balmes, E., & Corus, M. (2012). Definition of a linear equivalent model for a non-linear system with impacts. International Conference on Noise and Vibration Engineering 2012, ISMA 2012, Including USD 2012: International Conference on Uncertainty in Structure Dynamics, 2, 971-983.
  15. Zaccardi, C., Chamoin, L., Cottereau, R., & Ben Dhia, H. (2012). Adaptive coupling between stochastic and deterministic continuum models in the framework of the arlequin method. ECCOMAS 2012 – European Congress on Computational Methods in Applied Sciences and Engineering, e-Book Full Papers, 1894-1906.
  16. Zaccardi, C., Chamoin, L., Cottereau, R., & Ben Dhia, H. (2012). Error estimation for the coupling between a deterministic continuum model and a stochastic discrete model in the arlequin framework. ECCOMAS Thematic Conference – ADMOS 2011: International Conference on Adaptive Modeling and Simulation, an IACM Special Interest Conference, 511-522.

2011

  1. Alarcón, A., Bodel, C., & Bonnet, M. (2011). A coupled unscented kalman filter and modified error in constitutive relation technique for structural dynamics identification. Paper presented at the Proceedings of the 8th International Conference on Structural Dynamics, EURODYN 2011, 2163-2168.
  2. Chaboche, J. L., Kanouté, P., & Azzouz, F. (2011). A robust cyclic elastoplastic constitutive framework for fatigue life analysis. Paper presented at the Conference Program for the 3rd International Conference on Heterogeneous Materials Mechanics, ICHMM 2011, 853-856.
  3. Fabre, G., Guipont, V., Jeandin, M., Boustie, M., Cuq-Lelandais, J. P., Berthe, L., . . . Guedou, J. -. (2011). Laser shock adhesion test (lasat) of electron beam physical vapor deposited thermal barrier coatings (eb-pvd tbcs) . Advanced Materials Research, 278, 509-514. https://doi.org/10.4028/www.scientific.net/AMR.278.509
  4. Forest, S., Ammar, K., & Appolaire, B. (2011). Micromorphic vs. phase-field approaches for gradient viscoplasticity and phase transformations Lecture Notes in Applied and Computational MechanicsVolume 59 LNACM, 2011, Pages 69-88. https://doi.org/10.1007/978-3-642-22738-7_4
  5. Foucault, A., Voldoire, F., & Modaressi, A. (2011). On the numerical implementation of a multi-mechanism cyclic plasticity model associated to a dilation second gradient model aiming strain localization mitigation. Springer Series in Geomechanics and Geoengineering, International Workshop on Bifurcation and Degradation in Geomaterials, IWBDG 2011, Issue 203129, 201-208. https://doi.org/10.1007/978-94-007-1421-2_26
  6. Gaudichet-Maurin E, Devilliers C, Fernandes P, Oberti S, Lucatelli J-, Cambrezy M, et al. Chemical interaction of polyethylene pipes with chlorine in drinking water distribution systems. Tech Sci Methodes 2011(9):28-38. https://doi.org/10.1051/tsm/201109028
  7. Giordana, M. F., Giroux, P. -., Alvarez-Armas, I., Sauzay, M., & Armas, A. (2011). Micromechanical modeling of the cyclic softening of EUROFER 97 steel. Paper presented at the Procedia Engineering , 10 1268-1273. https://doi.org/10.1016/j.proeng.2011.04.211
  8. Guillemer, C., Clavel, M., & Cailletaud, G. (2011). Cyclic behavior of extruded magnesium: Experimental, microstructural and numerical approach. International Journal of Plasticity, 27(12), 2068-2084. https://doi.org/doi:10.1016/j.ijplas.2011.06.002
  9. Jus, Y., Longatte, E., Chassaing, J. -., & Sagaut, P. (2011). Vortex-induced vibrations of a cylinder at subcritical reynolds number. Paper presented at the American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, 4 11-18. https://doi.org/10.1115/PVP2011-57392
  10. Le Millier M., Calonne O., Crépin J., Duhamel C., Fournier L., Gaslain F., Héripré E., Pineau A., Vidalenc Y., Corrosion sous contrainte assistée par l’irradiation en milieu primaire d’un acier inoxydable austénitique, in : Hydrogène-matériaux, corrosion sous contrainte, fatigue corrosion, Presses Mines, p. 97-102, Journées jeunes chercheurs, Lyon, ed. E. Andrieu, C. Blanc et al., 2011
  11. Le Millier, M., Calonne, O., Crépin, J., Duhamel, C., Gaslain, F., Heripre, E., . . . Vidalenc, Y. (2011). Irradiation assisted stress corrosion cracking of stainless steels in a PWR environment: (A combined approach). Paper presented at the 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors 2011 , 2, 1224-1238.
  12. Lubin, S., Gourgues-Lorenzon, A. -F., Bacroix, B., & Réglé, H. (2011). Micromechanical modelling of microtexture formation in low alloy steel bainite . Solid State Phenomena, 172-174, 1228-1233. https://doi.org/10.4028/www.scientific.net/SSP.172-174.1228
  13. Lubin, S., Gourgues-Lorenzon, A. -F., Bacroix, B., Regle, H., & Montheillet, F. (2011). Effect of the metallurgical state of austenite on the microtexture properties of the bainitic transformation in a low alloy steel. Solid State Phenomena, 172-174, 772-777. https://doi.org/10.4028/www.scientific.net/SSP.172-174.772
  14. Luo, M., Rousselier, G., & Mohr, D. (2011). Application of a reduced texture methodology to model the plasticity of anisotropic extruded aluminum sheets. Paper presented at the AIP Conference Proceedings, 1383, 351-359 https://doi.org/10.1063/1.3623631
  15. Morgeneyer, T. F., Helfen, L., Sinclair, I., Hild, F., Proudhon, H., Xu, F., . . . Besson, J. (2011). In-situ synchrotron-radiation computed laminography observation of ductile fracture. Paper presented at the Conference Proceedings of the Society for Experimental Mechanics Series, 5, 19-25. https://doi.org/10.1007/978-1-4614-0228-2_3
  16. Mozayan Kharazi, M., Arson, C., & Gatmiri, B. (2011). Thermal damage in unsaturated geomaterials. Paper presented at the Unsaturated Soils – Proceedings of the 5th International Conference on Unsaturated Soils , 1, 585-588.
  17. Perrin, G., Duhamel, D., Soize, C., & Funfschilling, C. (2011). Stochastic modelling of track irregularities. Paper presented at the Proceedings of the 13th International Conference on Civil, Structural and Environmental Engineering Computing, CC 2011; Chania, Crete; Greece; 6 September 2011 through 9 September 2011; Code 89029
  18. Pham, K., Amor, H., Marigo, J. -., & Maurini, C. (2011). Gradient damage models and their use to approximate brittle fracture. International Journal of Damage Mechanics, 20(4), 618-652. https://doi.org/10.1177/1056789510386852
  19. Renault, P. O., Djaziri, S., Le Bourhis, E., Goudeau, P., Faurie, D., Thiaudière, D., & Hild, F. (2011). Measurement of applied strains in thin films deposited onto polymer by synchrotron X-ray diffraction. Procedia Engineering, 10, 2701-2706. https://doi.org/doi:10.1016/j.proeng.2011.04.450
  20. Sauzay, M., & Kubin, L. P. (2011). Scaling laws for dislocation microstructures in monotonic and cyclic deformation of fcc metals. Progress in Materials Science, 56(6), 725-784. https://doi.org/10.1016/j.pmatsci.2011.01.006
  21. Shen, Y., Garnier, J., Allais, L., Crepin, J., Ancelet, O., & Hiver, J. -. (2011). Experimental and numerical characterization of anisotropic damage evolution of forged Al6061-T6 alloy. Paper presented at the Procedia Engineering, 10 , 3429-3434. https://doi.org/10.1016/j.proeng.2011.04.565
  22. Vu, Q. H., Brenner, R., Castelnau, O., & Moulinec, H. (2011). Effective behaviour of viscoelastic polycrystals and associated local fields inferred from homogenization: Incremental collocation approach. Paper presented at the Procedia Engineering, 10, 177-182. https://doi.org/10.1016/j.proeng.2011.04.032

2010

  1. Alarcon A., Bodel C., Bonnet M., Structural dynamics monitoring via a coupled data assimilation and modified error in constitutive relation technique, in : European Conference on Computational Mechanics (ECCM 2010), Paris, 2010
  2. Benoit A., Maitournam H., Rémy L., Oger F., Asymptotic behaviour of structures subjected to thermomechanical cyclic loadings : application to exhaust manifolds, in : European Conference on Computational Mechanics (ECCM 2010), Paris, 2010
  3. Bornert M., Bourcier M., Dimanov A., Raphanel J., Héripré E., Caldemaison D., Multiscale surface and volume full-field strain measurements for improved insights on the micromechanics of materials, in : ICEM 14 – 14th International Conference on Experimental Mechanics, Poitiers, 2010
  4. Bouteleux S., Gérard C., Bacroix B., Bornert M., Brenner R., Cailletaud G., Crépin J., Leclercq, A numerical evaluation of various scale transition rules for uniform field models, in : 17th International Workshop of Computational Mechanics of Materials, Paris, 2007
  5. Bruchon J.F., Lenoir N., Pereira J.M., Vandamme M., Bornert M., Delage P., Investigation of capillary collapse in granular materials by x-ray microtomography, in : 2nd Conference on 3D-Imaging of Materials and Systems, Hourtin, 2010
  6. Castelnau, O., Bornert, M., Robach, O., Micha, J. S., Ulrich, O., Chiron, R., & Le Bourlot, C. (2010). Stress field in deformed polycrystals at the micron scale. EPJ Web of Conferences, 14th International Conference on Experimental Mechanics, ICEM 2014, 6, Article number 350052014 https://doi.org/10.1051/epjconf/20100635005
  7. Chateau C., Gélébart L., Bornert M., Crépin J., Caldemaison D., Boller E., Sauder C., Langer M., Ludwig W., Experimental characterisation of damage in SiC/SiC minicomposites, in : ICEM 14 – 14th International Conference on Experimental Mechanics, Poitiers, 2010
  8. Dautriat, J., Bornert, M., Gland, N., Dimanov, A., & Raphanel, J. (2010). In-situ analysis of strain localization related to structural heterogeneities of carbonate rocks. EPJ Web of Conferences, 14th International Conference on Experimental Mechanics, ICEM 2014 , 6, Article number 22007. https://doi.org/10.1051/epjconf/20100622007
  9. Devilliers, C., Laiarinandrasana, L., Fayolle, B., & Gaudichet-Maurin, E. (2010). Characterisation of aged hdpe pipes from drinking water distribution: Investigation of crack depth by nol ring tests under creep loading. Paper presented at the 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale, 8 p
  10. Djaziri, S., Thiaudière, D., Geandier, G., Renault, P. O., Le Bourhis, E., Goudeau, P., Randriamazaoro R.N, Chiron , Castelnau O., Faurie D., Hild F. (2010). Mechanical characterization of nanostructured thin films at different scales. EPJ Web of Conferences, 14th International Conference on Experimental Mechanics, ICEM 2014,6, Article number 26003. https://doi.org/10.1051/epjconf/20100626003
  11. Geandier, G., Faurie, D., Renault, P. O., Le Bourlot, C., Djemia, P., Castelnau, O., Shérif S.M., Le Bourhis E., Goudeau, P. (2010). X-ray strain analysis in thin films enhanced by 2D detection. EPJ Web of Conferences, 14th International Conference on Experimental Mechanics, ICEM 2014,6, Article number 26008. https://doi.org/10.1051/epjconf/20100626008
  12. Gilormini, P., Chevalier, L., & Régnier, G. (2010). Modeling the nonlinear PMMA behavior near glass transition temperature: Application to its thermoforming. Paper presented at the AIP Conference Proceedings, , 1315 179-184. https://doi.org/10.1063/1.3552437
  13. Giroux, P. F., Dalle, F., Sauzay, M., Caës, C., Fournier, B., Morgeneyer, T., & Gourgues-Lorenzon, A. F. (2010). Influence of strain rate on P92 microstructural stability during fatigue tests at high temperature. Procedia Engineering, 2(1) 2141-2150. https://doi.org/10.1016/j.proeng.2010.03.230
  14. Héripré, E., Caldemaison, D., Roos, A., Crépin, J. (2010). Microstrain analysis of titanium aluminides. Materials Science Forum, 6th International Conference on Processing and Manufacturing of Advanced Materials – THERMEC’2009, 638-642, 1330-1335. https://doi.org/10.4028/www.scientific.net/MSF.638-642.1330
  15. Hollner, S., Fournier, B., Lependu, J., Caes, C., Tournie, I., Pineau, A. (2010). Relationship between microstructure and mechanical behaviour of thermomechanically optimised 9-12%cr steels. 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale, 2010,
  16. Lim, R., Sauzay, M., Dalle, F., Tournié, I., & Gourgues-Lorenzon, A. F. (2010). Modelling of necking during creep of grade 91 steel. 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale, 2010,
  17. Martin G., Caldemaison D., Bornert M., Pinna C., Veron M., Chehab B., Fourmentin R., Mithieux J.D., Yerra S., Delannay L. et al, Determination of high temperature micro-scale strain distribution, in : Application to duplex stainless steels, DSS2010, Duplex World 2010 conference, Beaune, 2010
  18. Maynadier, A., Poncelet, M., Lavemhe-Taillard, K., & Roux, S. (2010). One-shot thermal and kinematic field measurements: Infra-red image correlation. Society for Experimental Mechanics – SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2010 , 2, 1395-1402.
  19. Maziere M., Besson J., Forest S., Wang H., Berdin C., Simulation par éléments finis de l’effet Portevin-Le Chatelier dans divers alliages métalliques et à différentes échelles, in : Neuvième colloque en calcul des structures, Giens, 2009
  20. Merhy, E., Rémy, L., Maitournam, H., & Augustins, L. (2010). A non-isothermal fatigue crack growth law for the A356-T7 aluminum alloy. 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale, 2010,
  21. Pannier, Y., Lenoir, N., & Bornert, M. (2010). Discrete volumetric digital image correlation for the investigation of granular type media at microscale: Accuracy assessment. Paper presented at the EPJ Web of Conferences, , 6, Article number 35003 https://doi.org/10.1051/epjconf/20100635003
  22. Poncelet, M., Barbier, G., Raka, B., Courtin, S., Desmorat, R., Le-Roux, J. C., & Vincent, L. (2010). DIC-aided biaxial fatigue tests of a 304L steel. EPJ Web of Conferences, 14th International Conference on Experimental Mechanics, ICEM 2014,6, Article number 16002 . https://doi.org/10.1051/epjconf/20100616002
  23. Salmi M., Auslender F., Bornert M., Fogli M., Improved bounds for linear elastic composites, in : IV European Congress on Computational Mechanics : Solids, Structures and Coupled Problems in Engineering, 2010
  24. Schwartz, J., Fandeur, O., & Rey, C. (2010). Fatigue crack initiation modeling of 316LN steel based on non local plasticity theory. Procedia Engineering , 10th International Fatigue Congress, FATIGUE 2010, 2(1) 1353-1362. https://doi.org/10.1016/j.proeng.2010.03.147
  25. Steckmeyer, A., Fournier, B., Malaplate, J., Praud, M., Tournié, I., & Forest, S. (2010). Deformation mechanisms and damage of oxide dispersion strengthened steels at high temperature. . 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale, 2010,
  26. Vermot Des Roches, G., Balmes, E., Pasquet, T., & Lemaire, R. (2010). Time/frequency analysis of contact-friction instabilities. application to automotive brake squeal. Proceedings of ISMA 2010 – International Conference on Noise and Vibration Engineering, Including USD 2010, 4383-4397.
  27. Wang, H. D., Berdin, C., Mazière, M., Forest, S., Prioul, C., & Parrot, A. (2010). Influence of dynamic strain ageing on ductile fracture of a C-MN steel. 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale, 2010,
  28. Yang, D. S., Bornert, M., Gharbi, H., Valli, P., & Wang, L. L. (2010). Optimized optical setup for DIC in rock mechanics. EPJ Web of Conferences, 14th International Conference on Experimental Mechanics, ICEM 2014, 6, Article number 22019.
  29. Yastrebov V., Cailletaud G., Feyel F., Traitement des problèmes de contact en calcul parallèle, in : Neuvième colloque en calcul des structures, Giens, 2009

2009

  1. Laverne J, Lorentz E. Marigo J.-J. (2009) Modèle cohésif de fissuration par fatigue, Congrès Français de Mécanique et Colloque de calcul des structures 2009, Marseille, France

2008

  1. Gérard, M. Bornert, D. Caldemaison, F. N’Guyen, G. Cailletaud (2008) Finite element simulation of strain localisation scheme, and comparison with experimental results, under cyclic loading paths, for an OFHC copper. IWCMM 18, Pekin, China
  2. Bornert, F. Vales, H. Gharbi, D. Nguyen Minh (2008) Multiscale full-field strain measurements for micromechanical investigations of the hydromechanical behaviour of clayey rocks, Photomechanics 2008, Loughborough, England
  3. Ben Dhia, M.Torkhani (2008) How the Arlequin method could help for the sheet metal forming simulation, ESAFORM-2008, France
  4. Kubin, B. Devincre, T. Hoc (2008) The Modeling of Plasticity : How Can Dislocation Dynamics Simulations Help, TMS Annual Meeting – Linking Science and Technology for Global Solutions
  5. Lubin, A.-F. Gourgues-Lorenzon, H. Réglé, F. Montheillet, B. Bacroix (2008) EBSD investigation of phase transformation in low carbon steels, ICOTOM 15, juin 2008, Pittsburgh, USA
  6. Rupin, M. Bornert, P. Gilormini, A. Zaoui, C. Pinna (2008) Potential influence of microstructural morphology on the viscoplastic flow of two-phase polycrystals in : Continuum models and discrete systems 11 – Continuum models and discrete systems 11. D. Jeulin and S. Forest Eds, 149-154, Les Presses Mines ParisTech, France

2007

  1. Belotteau, C. Berdin, S. Forest, A. Parrot, C. Prioul (2007) Comportement et rupture d’aciers en presence de vieillissement sous deformation, 18ème Congrès Français de Mécanique, aout 2007, Grenoble, France
  2. Belotteau, C. Berdin, S. Forest, A. Parrot, C. Prioul (2007) From Static to dynamic strain aging : modelling the mechanical behavior of a ferritic steel over the (20-350) °C temperature range, Shear, Nancy, France
  3. Bouteleux, C. Gérard, B. Bacroix, M. Bornert, R. Brenner, G. Cailletaud, J. Crépin, S. Leclercq (2007) A numerical evaluation of various scale transition rules for uniform field models, 17th International Workshop of Computational Mechanics of Materials, France
  4. Elbachiri, P. Doumalin, J. Crepin, M. Bornert, P. Barberis, V. Rebeyrolle, T. Bretheau (2007) Characterization of local strain distribution in Zircaloy4 and M5 alloys, 15th International Symposium on Zirconium in the Nuclear Industry, USA
  5. Gérard, B. Bacroix, M. Bornert, R. Brenner, G. Cailletaud, D. Caldemaison, T. Chauveau, J. Crépin, V. Mounoury, S. Leclercq (2007) Etude expérimentale et simulation numérique, au moyen de modèles de plasticité cristalline, de chargements non proportionnels, 18ème Congrès Français de Mécanique, aout 2007, Grenoble, France
  6. Gérard, B. Bacroix, M. Bornert, R. Brenner, G. Cailletaud, D. Caldemaison, T. Chauveau, J. Crépin, V. Mounoury, S. Leclercq (2007) Study of non-proportional loading paths : comparison between experimental results and simulations performed by finite element and homogenized models, 17th Int. Workshop of Computational Mechanics of Materials, Paris, France
  7. Héripré, J. Crépin, A. Roos (2007) Identification de paramètres de loi de comportement cristalline à partir de mesures de champs, Mecamat 07, Aussois, France
  8. Lubin, H. Réglé (2007) In situ SEM-EBSD observations of a phase transformation in a Ti-IF steel, EUROMAT 2007, Sept 2007, Nürnberg, Allemagne.
  9. Moumni, W. Zaki, H. Maitournam (2007) Cyclic behavior and energy approach of the fatigue of shape memory alloys, Proceedings of the International conference on Thermomechanical modeling of Solids, Palaiseau, France
  10. Moumni, W. Zaki, Q.S. Nguyen (2007) Theoretical and numerical modeling of solid-solid phase change, Proceedings of the International conference Plasticity 2007, Alaska, USA
  11. Nicodeau, J. Cinquin, G. Régnier, J. Verdu, F. Chinesta (2007) A multiphysic and multi-scale approach to model the continuous welding of thermoplastic matrix composites, Proceedings of the 16th International Conference on Composite Materials, Kyoto, Japon
  12. Régnier, J. Verdu, C. Nicodeau, J. Cinquin, F. Chinesta (2007) Une approche multiphysique du soudage en continu des composites à matrice thermoplastique : vers une modélisation multiéchelles, Actes du 18ème Congrès Français de Mécanique, aout 2007, Grenoble, France
  13. Roos A., E. Héripré, J. Crépin, J-L. Chaboche (2007) Microstrains, macrostresses and the role of subsurface fields in the identification of constitutive laws, Eccoma, Prague, République Tchèque
  14. Szmytka, L. Remy, H. Maitournam, A. Koster, M. Bourgeois, T.M.L. Nguyen Tajan (2007) Détermination d’une nouvelle loi de comportement elasto-viscoplastique pour une fonte à graphite sphéroidal, 18ème Congrès Français de Mécanique, aout 2007, Grenoble, France
  15. Szmytka, L. Rémy, H. Maitournam, A. Koster, M. Bourgeois, T. Mac Lan Nguyen-Tajan (2007) Mise au point d’un nouveau modèle de comportement élasto-viscoplastique. Application au dimensionnement à la fatigue d’un collecteur d’échappement de moteur diesel en fonte, Fatigue sous sollicitations thermiques – 26 èmes Journées de Printemps – JP 2007, France
  16. Szmytka, H. Maitournam, L. Rémy, A. Koster, M. Bourgeois, T. Mac Lan Nguyen-Tajan (2007) Comportement élastoviscoplastique d’une fonte GS et son intégration numérique, 8ème Colloque National en Calcul des Structures, Giens, France
  17. T. Trinh, F. Roger, K. Dang Van (2007) Comportement thermomécanique et métallurgique des aciers, Actes du 8ème Colloque National en Calcul des Structures, Giens, France
  18. T. Trinh, F. Roger, K. Dang Van (2007) Modélisation du comportement thermomécanique et métallurgique des aciers, Actes du 18ème Congrès Français de Mécanique, aout 2007, Grenoble, France

2006

  1. Rupin, M. Bornert, A. Zaoui, P. Gilormini, C. Pinna (2006) Influence de la morphologie microstructurale sur la réponse mécanique de polycristaux biphasés, Mécamat 06, Aussois, France
  2. Andrieux, H.D. Bui, K. Hadj-Sassi (2006) New results with the reciprocity gap functional for the identification of cracks and small inclusions, WCCM VII- 7th World Congress on Computational Mechanics, july 2006, Los Angeles, USA
  3. Bacroix, J-L. Béchade, K. Zhu, D. Chaubet, F. Barcelo, J. Crépin (2006) Elaboration et croissance de multicristaux à gros grains en Zr, Matériaux 2006, nov 2006, Dijon, France
  4. Belotteau, C. Berdin, S. Forest, A. Parrot, C. Prioul (2006) Strain aging and prediction of ductile fracture of C-Mn steels, Local approach to fracture, EUROMECH-MECAMAT 2006, 9th European Mechanics of Materials Conference, mai 2006, Moret sur Loing, France
  5. Belotteau, C. Berdin, S. Forest, A. Parrot, C. Prioul (2006) Mechanical behaviour in the presence of strain aging, 16th European Conference on Fracture, Alexandroupolis, Greece
  6. Belotteau, C. Berdin, S. Forest, A. Parrot, C. Prioul (2006) Strain aging and ductile fracture prediction, 9th European Mechanics of Materials Conference, Moret sur Loing, France, Les presses des Mines de Paris, eds J. Besson D. Moinereau, D. Steglich
  7. Bornert, P. Gilormini, C. Pinna, N. Rupin, A. Zaoui (2006) Viscoplastic flow and microstructure evolution of two-phase polycrystals, Colloque de lancement du GdR Européen sur les matériaux hétérogènes, janv 2006, Autrans, France
  8. Castelnau, P. Goudeau, G. Geandier, N. Tamura, J.L. Béchade, M. Bornert, D. Caldemaison (2006) White beam microdiffraction experiments for the determination of the local plastic behaviour of polycrystals, 7th Eur. Conf. Residual Stresses, sept 2006, Berlin, Allemagne
  9. Gérard, B. Bacroix, M. Bornert, R. Brenner, G. Cailletaud, O. Castelnau, J. Crépin, S. Forest, S. Leclercq (2006) Experimental study and numerical simulation of non proportional loading paths using finite element crystal plasticity in : 16th International Workshop of Computational Mechanics of Materials, Lublin, Pologne
  10. Graff, S. Forest, J.L. Strudel, C. Prioul, J.L. Béchade (2006) Caractérisation et modélisation des phénomènes de vieillissement dans les alliages de zirconium, Matériaux 2006, nov 2006, Dijon, France
  11. Kham, M. Torkhani, P. Massin, H. Ben Dhia (2006) Simulation of the rod cluster drop time into a nuclear core using a continuous lagrangian formulation of contact , World Congress on Computational Mechanics VII, USA
  12. Régnier, J. Verdu, C. Nicodeau, J. Cinquin, F. Chinesta (2006) Modeling of the continuous welding of thermoplastic matrix composites, Proceedings of the 12th European Conference on Composite Materials – 12th European Conference on Composite Materials, Biarritz, France
  13. Rupin, M. Bornert, P. Gilormini, C. Pinna, A. Zaoui (2006) Influence of microstructural morphology on viscoplastic flow of two-phase polycrystals, 43rd Annual Meeting of the Society of Engineering Science, USA
  14. Torkhani, H. Ben Dhia (2006) Multiscale analyses and wear of thin structures in contact, World Congress on Computational Mechanics, USA
  15. Zaoui A., V. Marcadon, E. Hervé (2006) Particle size effects in nanocomposites, IUTAM Symposium Size effects on material and structural behavior at micron- and nano-scales, Pin Tong and Qingping Sun (eds), 97−106, Springer, The Netherlands

2005

  1. Andrieux, Q.S. Nguyen (2005) Le modèle standard généralisé non local : une théorie consistante du gradient, 17ème Congrès Français de Mécanique, sept 2005, Troyes, France
  2. Ben Dhia, M. Torkhani, C. Zammali (2005) Modèles d’interface multi-niveaux pour les problèmes de contact, Proceedings du 7ème Colloque National de Calcul des Structures – Colloque National de Calcul des Structures, Giens, France
  3. -L.Chaboche, A. Roos, E. Héripré, J. Crépin (2005) Combination of computational crystal plasticity modelling and microstrain field measurements techniques for the analysis of TiAl behaviour, PcMat 2005, Baton Rouge, USA
  4. Héripré, J. Crépin, A. Roos, J-L. Chaboche (2005) Influence de la microstructure sur le chemin de fissuration des TiAl, 17ème Congrès Français de Mécanique, sept 2005, Troyes, France
  5. Héripré, J. Crépin, A. Roos, A. Serre, J-L. Chaboche (2005) Experimental and numerical study of plastic behavior and crack propagation in gamma based TiAl microstructures, EMMC8, Cachan, France
  6. Lamarche, F. Voldoire, H. Ben Dhia, C. Zammali (2005) Validation of contact-impact approaches for FEM software, Proceedings of Eurodyn 2005 – EURODYN, France
  7. Roos A., M. Thomas, E. Héripré, J. Crépin, J-L. Chaboche (2005) On the identification of multiscale crystal plasticity models of Titanium Aluminides, Int. Plasticity’05, 523-525, Hawaii, USA
  8. Rupin, M. Bornert, P. Gilormini, C. Pinna, A. Zaoui (2005) Homogénéisation variationnelle pour l’analyse des déformations à chaud d’aciers biphasés, 17ème Congrès Français de Mécanique, sept 2005, Troyes, France

2004

  1. Bornert, D. Jeulin, E. Maire, H. Moulinec, J.M. Chaix, O. Castelnau (2004) Analyse tridimensionnelle expérimentale et théorique des champs locaux dans un composite non linéaire, Poster, Colloque d’étape du Programme Matériaux du CNRS, Toulouse, France
  2. Besson, R. Desmorat (2004) Numerical implementation of constitutive models, in Local approach to fracture, 279-310
  3. Gélébart, M. Dexet, M. Sauzay, J. Crépin, A. Roos (2004) Identification of crystalline behavior on macroscopic response and local strain field analysis, Zirconium in the Nuclear Industry, 14th Int. Symp. ASTM STP 1467, P. Ruding and B. Kammenzind, Eds, West Conshohocken, PA, 1, 9, 585-601
  4. Henry, A. Meunier, D. Aubry, J. Crépin, D. Caldemaison, T. Hoc (2004) Etude expérimentale et modélisation de la déformation locale d’un tissu osseux cortical : relation avec la microstructure, Mecamat 04, Aussois, France
  5. Henry, A. Meunier, D. Aubry, J. Crépin, D. Caldemaison, T. Hoc (2004) Characterization of local strain fields in cortical bone, SEM X Int. Congress and Exposition on experimental and applied mechanics, Costa Mesa, USA
  6. Héripré, J. Crépin, A. Roos, J-L. Chaboche (2004) Etude expérimentale et modélisation du comportement mécanique des alliages TiAl à l’échelle du grain, Réunion Plasticité 2004, Metz, France
  7. Héripré, J. Crépin, A. Roos, J-L. Chaboche (2004) Identification of crystallographic constitutive law’s parameters using local strain fields, SEM X Int. Congress and Exposition on experimental and applied mechanics, Costa Mesa, USA

2003

  1. Auslender, M. Bornert, T. Hoc, R. Masson, A. Zaoui (2003) An affine micromechanical approach for the prediction of the elastoplastic behaviour of polycrystals at finite strain, IUTAM Symposium Computational Mechanics of Solid Materials at Large Strains, Ch. Miehe (ed), 301-310, Kluwer Academic Pub., The Netherlands
  2. Castelnau, J. Crépin, V. Ji, A.L. Hamon, A.F. Gourgues, G. Régnier (2003) Microdiffraction en faisceau blanc et/ou monochromatique pour la mécanique des Matériaux, Atelier Imagerie – Synchrotron SOLEIL, nov 2003, Orsay France
  3. Castelnau, N. Letouzé, J. Crépin, D. Caldemaison, M. Ceretti, R. Brenner (2003) Distribution inter- et intra-granulaire des déformations élastiques dans un acier chargé élastiquement : analyse par diffraction et homogénéisation, Réunion du GFAC, Metz, France
  4. Gélébart, J. Crépin, M. Bornert, T. Bretheau, A. Roos, T. Hoc (2003) Couplage EBSD-microextensométrie et identification de lois cristallines, Réunion Plasticité 2003, Lille, Paris
  5. Haddadi, S. Héraud, L. Allais, C. Teodosiu, A. Zaoui (2003) A numerical mesoscope for the investigation of local fields in rate-dependent elastoplastic materials at finite strain, IUTAM Symposium Computational Mechanics of Solid Materials at Large Strains, Ch. Miehe (ed), 311-320, Kluwer Academic Pub., The Netherlands
  6. Hoc, J. Crépin, A. Zaoui (2003) Identification of behavior by inverse method performed on local deformation, Plasticity’03 Dislocations, plasticity and metal forming, S. Kahn, R. Kazmi, J. Zhou (eds), 433-435, Quebec, Canada