1. Barbosa L.C.M., Lorrette C., Le Bras S., Baranger E., Lamon J. Tensile strength analysis and fractography on single nuclear grade SiC fibers at room temperature (2023) Journal of Nuclear Materials, 576, art. no. 154256
  2. Bayard, M., Blétry, M., Héripré, E., Maitournam, H., Improving mechanical characteristics of a Zr based metallic glass under dynamic conditions by dynamic predeformation (2023) Materials Letters, 330, art. no. 133219.
  3. Bono M., Zouari A., Le Jolu T., Le Boulch D., Tabouret H., Crépin J., Besson J. Biaxial expansion due to compression experiments for measuring the failure strain of tubular samples  (2023) Strain.  2
  4. Bouby C., Morin L., Bignonnet F., Dormieux L., Kondo D. On the thermodynamics consistency of Gurson’s model and its computational implications (2023) International Journal of Solids and Structures, 279, art. no. 112359
  5. Brot G., Koutiri I., Bonnand V., Favier V., Dupuy C., Ranc N., Aimedieu P., Lefebvre F., Hauteville R. Microstructure and defect sensitivities in the very high-cycle fatigue response of Laser Powder Bed Fused Ti–6Al–4V (2023) International Journal of Fatigue, 174, art. no. 107710, 
  6. Buljac A., Kong X., Helfen L., Hild F., Morgeneyer T.F.  Shear loading dominated damage mechanisms and strain localization studied by in situ 3D laminography imaging and Digital Volume Correlation for AA2198-T8 (2023) Mechanics of Materials, 178, art. no. 104558, 
  7. Chadefaux D., Pothrat C., Shayegan S., Le Carrou J.-L. Forearm muscles activity of harp players (2023) Computer Methods in Biomechanics and Biomedical Engineering,  p. 1-12 https://doi.org/10.1080/10255842.2023.2258252
  8. Chang X., Hallais S., Danas K., Roux S. PeakForce AFM Analysis Enhanced with Model Reduction Techniques (2023) Sensors, 23 (10), art. no. 4730
  9. Chebil G., Bettebghor D., Renollet Y., Lapouge P., Davoine C., Thomas M., Favier V., Schneider M., Deep learning object detection for optical monitoring of spatters in L-PBF (2023) Journal of Materials Processing Technology, 319, p. 118063
  10. Cherrière T., Vancorsellis T., Hlioui S., Laurent L., Louf F., Ben Ahmed H., Gabsi M., A Multimaterial Topology Optimization considering the PM Nonlinearity, IEEE Transactions on Magnetics, 2023, pp.1-1
  11. Corfdir A., Bonnet G. Degenerate scales for thin elastic plates with Dirichlet boundary conditions (2023) Acta Mechanica, 234 (4), pp. 1503 – 1532
  12. Deboeuf S., Fall A. Cohesion and aggregates in unsaturated wet granular flows down a rough incline (2023) Journal of Rheology, 67 (4), pp. 909 – 922
  13. Dépinoy S., Marini B., Toffolon-Masclet C., Roch F., Gourgues-Lorenzon A.-F. Correction to: Austenite Grain Growth in a 2.25Cr-1Mo Vanadium-Free Steel Accounting for Zener Pinning and Solute Drag: Experimental Study and Modeling (Metallurgical and Materials Transactions A, (2017), 48, 5, (2289-2300), 10.1007/s11661-017-4002-4) (2023) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 54 (12), pp. 4994 – 4996
  14. Desmorat B., Olive M., Auffray N., Desmorat R., Kolev B. Computation of minimal covariants bases for 2D coupled constitutive laws (2023) International Journal of Engineering Science, 191, art. no. 103880
  15. Doitrand A., Leguillon D., Molnár G., Lazarus V. Revisiting facet nucleation under mixed mode I + III loading with T-stress and mode-dependent fracture properties (2023) International Journal of Fracture, 242 (1), pp. 85 – 106
  16. El Ouazani Tuhami A., Feld-Payet S., Quilici S., Osipov N., Besson J. Simulations of complex crack paths using a robust and cost-efficient continuous–discontinuous approach (2023) International Journal of Solids and Structures, 274, art. no. 112199
  17. Fourrier G., Alain Rassineux, François-Henri Leroy, Martin Hirsekorn, Christian Fagiano, Emmanuel Baranger. Automated conformal mesh generation chain for woven composites based on CT-scan images with low contrasts, Composite Structures, 2023, 308, pp.116673
  18. Fullana, T., Le Chenadec, V., Sayadi, T., Adjoint-based optimization of two-dimensional Stefan problems (2023) Journal of Computational Physics, 475, art. no. 111875.
  19. Gaudez S., Ben Haj Slama M., Héripré E., Yedra L., Scheel M., Hallais S., Upadhyay M.V. A synchrotron transmission X-ray microscopy study on precipitate evolution during solid-state thermal cycling of a stainless steel (2023) Additive Manufacturing, 73, art. no. 103692 
  20. Gong C., Marae Djouda J., Hmima A., Gaslain F., Kauffmann J., Chemkhi M., Maurer T., Panicaud B. Local characterization of stainless steel 17-4PH produced by material extrusion additive manufacturing: Influence of the post-treatment (2023) Materials Science and Engineering: A, 880, art. no. 145371
  21. Haddadi H., Tran H.-S., Franciosi P. Use of Digital Image Correlation (DIC) to Improve the Critical Strain-Annealing (CSA) Method for Producing Large Crystals: Application to A1050 Commercially Pure Aluminum (2023) Crystals, 13 (6), art. no. 923
  22. Hériveaux Y., Sophie Le Cann, Katharina Immel, Elsa Vennat, Vu-Hieu Nguyen, Vladimir Brailovski, Patrick Karasinski, Roger A Sauer, Guillaume Haia, Debonding of coin-shaped osseointegrated implants: Coupling of experimental and numerical approaches. Journal of the mechanical behavior of biomedical materials, 2023, pp.105787
  23. Huang Q., Charles Y., Maisonneuve M., Duhamel C., Guerre C., Gasperini M., Crepin J. Experimental and numerical analysis of mechanical fields on cross-shaped specimens for stress corrosion cracking of cold-worked austenitic stainless steels exposed to primary environment (2023) Journal of Nuclear Materials, 582, art. no. 154478
  24. Hurst M., Lukas Helfen, Thilo Morgeneyer, Heikki Suhonen, Ante Buljac, François Hild, Jussi-Petteri Suuronen, Tilo Baumbach, Daniel Hänschke, Hierarchically guided in situ nanolaminography for the visualisation of damage nucleation in alloy sheets. Scientific Reports, 2023, 13 (1), pp.1055.
  25. Joste B., Devincre B., Gatti R., Proudhon H. Simulation of intragranular plastic deformation localization in FCC polycrystals by Discrete Dislocation Dynamics (2023) Modelling and Simulation in Materials Science and Engineering, 31 (8), art. no. 085021
  26. Karoui Z., Berthe J., Maurini C. Non-uniform spacing of transverse cracks in symmetric composite laminates (2023) International Journal of Fracture, 242 (2), pp. 191 – 206
  27. Kumar, A., Audoly, B., Lestringant, C., Asymptotic derivation of a higher-order one-dimensional model for tape springs (2023) Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 381 (2244), art. no. 20220028.
  28. Lebihain M., Leblond J.-B., Ponson L. Crack front instability in mixed-mode I+III: The influence of non-singular stresses (2023) European Journal of Mechanics, A/Solids, 100, art. no. 104602
  29. Leblond, J.-B., Lebihain, M. An extended Bueckner–Rice theory for arbitrary geometric perturbations of cracks (2023) Journal of the Mechanics and Physics of Solids, 172, art. no. 105191, .
  30. Luo Y.-M., Detrez F., Chevalier L., Lu X., Roland S. Multiscale framework for estimation of elastic properties of Poly ethylene terephthalate from the crystallization temperature (2023) Mechanics of Materials, 181, art. no. 104617
  31. Mahmoud Hawchar B., Honorio T., Vandamme M., Osselin F., Pereira J.-M., Brochard L. Solubility of NaCl under anisotropic stress state  (2023) Journal of Chemical Physics, 159 (3), art. no. 034703
  32. Marigo, J.-J., Maurel, A., Pham, K., Negative refraction in a single-phase flexural metamaterial with hyperbolic dispersion (2023) Journal of the Mechanics and Physics of Solids, 170, art. no. 105126
  33. Morel C., Baranger E., Lamon J., Braun J., Lorrette C. The influence of internal defects on the mechanical behavior of filament wound SiC/SiC composite tubes under uniaxial tension (2023) Journal of the European Ceramic Society, 43 (5), pp. 1797 – 1807
  34. Mou, G., Desmorat, B., Turlin, R., Auffray, N., On exotic linear materials: 2D elasticity and beyond (2023) International Journal of Solids and Structures, 264, art. no. 112103.
  35. Munoz D., Allix O., Chinesta F., Ródenas J.J., Nadal E. Manifold learning for coherent design interpolation based on geometrical and topological descriptors (2023) Computer Methods in Applied Mechanics and Engineering, 405, art. no. 115859
  36. Scherding C., Rigas G., Sipp D., Schmid P.J., Sayadi T. Data-driven framework for input/output lookup tables reduction: Application to hypersonic flows in chemical nonequilibrium (2023) Physical Review Fluids, 8 (2), art. no. 023201,. 1 
  37. Vertonghen L., Irisarri F.-X., Bettebghor D., Desmorat B. Gradient-based concurrent topology and anisotropy optimization for mechanical structures (2023) Computer Methods in Applied Mechanics and Engineering, 412, art. no. 116069


  1. Auger, T., Barkia, B., Héripré, E., Michel, V., Mutel, D., Guillot, I., Hamouche, Z., Medina-Almazàn, L., Crack path and liquid metal embrittlement specificity of austenitic steels in mercury at room temperature (2022) Scripta Materialia, 215,  114733.
  2. Baruffi, C., Finel, A., Le Bouar, Y., Bacroix, B., Salman, O.U., Atomistic simulation of martensite microstructural evolution during temperature driven β→α transition in pure titanium (2022) Computational Materials Science, 203,  111057.
  3. Ben Haj Slama, M., Yedra, L., Heripre, E., Upadhyay, M.V., Insight on precipitate evolution during additive manufacturing of stainless steels via in-situ heating-cooling experiments in a transmission electron microscope (2022) Materialia, 21,  101368.
  4. Chen, Y., Lorentz, E., Dahl, A., Besson, J., Simulation of ductile tearing during a full size test using a non local Gurson–Tvergaard–Needleman (GTN) model (2022) Engineering Fracture Mechanics, 261,  108226.
  5. Théodore Cherrière, Luc Laurent, Sami Hlioui, François Louf, Pierre Duysinx, Christophe Geuzaine, Hamid Ben Ahmed, Mohamed Gabsi, Eduardo Fernández, Multi-material topology optimization using Wachspress interpolations for designing a 3-phase electrical machine stator. Structural and Multidisciplinary Optimization, 2022, 65 (12), pp.352
  6. Chierici, A., Chirco, L., Le Chenadec, V., Scardovelli, R., Yecko, P., Zaleski, S., An optimized VOFI library to initialize the volume fraction field (2022) Computer Physics Communications, 281,  108506.
  7. Corfdir, A., Bonnet, G., Degenerate scales for thin elastic plates with Dirichlet boundary conditions (2022) Acta Mechanica, 234, 1503–1532.
  8. Débarre, A., Julian-Jankowiak, A., Parlier, M., Renollet, Y., Pujol, G., Boussuge, M., Effect of temperature on the mechanical behaviour of an oxide/oxide composite (2022) Journal of the European Ceramic Society, 42 (15), pp. 7149-7156.
  9. Deboeuf, S., Ducloué, L., Lenoir, N., Ovarlez, G., A mechanism of strain hardening and Bauschinger effect: shear-history-dependent microstructure of elasto-plastic suspensions (2022) Soft Matter, 18 (46), pp. 8756-8770.
  10. Dupuis, A., Pesce, J.-J., Marijon, J.-B., Roux, S., Régnier, G., Use of a digital image correlation method for full-field shrinkage measurement in injection molding (2022) Journal of Strain Analysis for Engineering Design, 57 (8), pp. 702-713.
  11. Elie, B., Cotté, B., Boutillon, X., Physically-based sound synthesis software for Computer-Aided-Design of piano soundboards (2022) Acta Acustica, 6, 30.
  12. Gaudez, S., Ben Haj Slama, M., Kaestner, A., Upadhyay, M.V., Bergamaschi, A., 3D deep convolutional neural network segmentation model for precipitate and porosity identification in synchrotron X-ray tomograms (2022) Journal of Synchrotron Radiation, 29 (Pt 5), pp. 1232-1240.
  13. Tulio Honorio, Laurent Brochard. Drained and undrained heat capacity of swelling clays. Physical Chemistry Chemical Physics, 2022, 24 (24), pp.15003-15014
  14. Jiang, M., Fan, Z., Kruch, S., Devincre, B., Grain size effect of FCC polycrystal: A new CPFEM approach based on surface geometrically necessary dislocations (2022) International Journal of Plasticity, 150,  103181
  15. Kimmig, F., Caruel, M., Chapelle, D., Varying thin filament activation in the framework of the Huxley’57 model (2022) International Journal for Numerical Methods in Biomedical Engineering, 38 (12),  e3655.
  16. Kinda, J., Bourdot, A., Charpin, L., Michel-Ponnelle, S., Adia, J.-L., Thion, R., Legroux, R., Benboudjema, F., Experimental and numerical investigation of drying rate impact on moisture loss, exchange coefficient and drying shrinkage of cement paste (2022) Construction and Building Materials, 330,  127099.
  17. Kinda, J., Bourdot, A., Charpin, L., Michel-Ponnelle, S., Benboudjema, F., Investigation of Drying Shrinkage of Cement-Based Materials Assisted by Digital Image Correlation (2022) Journal of Materials in Civil Engineering, 34 (3),  04021477.
  18. Thomas Lavigne, Arnaud Mazier, Antoine Perney, Stéphane Pierre Alain Bordas, François Hild, Jakub Lengiewicz,  Digital Volume Correlation for Large Deformations of Soft Tissues: Pipeline and Proof of Concept for the application to Breast ex vivo Deformations. Journal of the mechanical behavior of biomedical materials, 2022, 136, pp.105490.
  19. Lebihain, M., Leblond, J.-B., Ponson, L., Crack front instability in mixed-mode I+III: The influence of non-singular stresses (2022) European Journal of Mechanics, A/Solids, 104602.
  20. Lindroos, M., Scherer, J.-M., Forest, S., Laukkanen, A., Andersson, T., Vaara, J., Mäntylä, A., Frondelius, T., Micromorphic crystal plasticity approach to damage regularization and size effects in martensitic steels (2022) International Journal of Plasticity, 151,  103187.
  21. Maeztu Redin, D., Caroux, J., Rohan, P.-Y., Pillet, H., Cermolacce, A., Trnka, J., Manassero, M., Viateau, V., Corté, L., A wear model to predict damage of reconstructed ACL (2022) Journal of the Mechanical Behavior of Biomedical Materials, 136,  105426.
  22. Mayer, C.R., Levy-Falk, H., Rémond, M., Trippé-Allard, G., Fossard, F., Vallet, M., Lepeltier, M., Guiblin, N., Lauret, J.-S., Garrot, D., Deleporte, E., Synthesis of highly calibrated CsPbBr3 nanocrystal perovskites by soft chemistry (2022) Chemical Communications, 58, 5960-5963.
  23. Mikaeili, E., Claus, S., Kerfriden, P., Concurrent multiscale analysis without meshing: Microscale representation with CutFEM and micro/macro model blending (2022) Computer Methods in Applied Mechanics and Engineering, 393, 114807.
  24. Annie Morch, Jean-François Witz, Boris Desmorat, Rodrigue Desmorat, Mathias Brieu. Kelvin decomposition for nonlinear hyperelastic modeling in large deformation. Mathematics and Mechanics of Complex Systems, 2022, 9 (4), pp.337-365
  25. Neggers, J., Héripré, E., Bonnet, M., Hallais, S., Roux, S., A generic topography reconstruction method based on multi-detector backscattered electron images (2022) Strain, 58 (5), 12416.
  26. Nguyen C.T., Langlois V., Guilleminot J., Detrez F., Duval A., Bornert M., Aimedieu P., Perrot C., Polydisperse solid foams: Multiscale modeling and simulations of elasto-acoustic properties including thin membrane effects, (2022) Int. J. Sol. Struct., 249, 111684.
  27. Shokeir, Z., Besson, J., Belhadj, C., Petit, T., Madi, Y., Edge tracing technique to study post-necking behavior and failure in Al alloys and anisotropic plasticity in line pipe steels (2022) Fatigue and Fracture of Engineering Materials and Structures, 45 (9), pp. 2427-2442.
  28. Olive, M., Kolev, B., Desmorat, R., Desmorat, B., Erratum, Characterization of the symmetry class of an elasticity tensor using polynomial covariants (Characterization of the symmetry class of an elasticity tensor using polynomial covariants (Math Mech Solid, (2021), (27), (144–190), 10.1177/10812865211010885) (2022) Mathematics and Mechanics of Solids, 27 (12), pp. 2751-2752.
  29. Olive, M., Kolev, B., Desmorat, R., Desmorat, B., Characterization of the symmetry class of an elasticity tensor using polynomial covariants (2022) Mathematics and Mechanics of Solids, 27 (1), pp. 144-190.
  30. Onimus, F., Gélébart, L., Brenner, R., Polycrystalline simulations of in-reactor deformation of recrystallized Zircaloy-4 tubes: Fast Fourier Transform computations and mean-field self-consistent model (2022) International Journal of Plasticity, 153,  103272.
  31. Paux, J., Morin, L., Brenner, R., A model of porous plastic single crystals based on fractal slip lines distribution (2022) Journal of the Mechanics and Physics of Solids, 167,  104948.
  32. Petit, T., Ritter, C., Besson, J., Morgeneyer, T.F., Effects of neutron irradiation and post-irradiation annealing on pop-in crack propagation instabilities in 6061 aluminium alloy (2022) Journal of Nuclear Materials, 569,  153909.
  33. Phalke, V., Kaiser, T., Scherer, J.–M., Forest, S., Modeling size effects in microwire torsion: A comparison between a Lagrange multiplier-based and a CurlFp gradient crystal plasticity model (2022) European Journal of Mechanics, A/Solids, 94,  104550.
  34. Richaud, E., Pires, L., Roland, S., Truffault, L., Laiarinandrasana, L., Corfa, A., Pinaud, J., Caillol, S., Ladmiral, V., Beauvais, C., Thermal Degradation of Fluorosilicone Elastomers (2022) Macromolecular Symposia, 405 (1),  2100220.
  35. Rill-García, R., Dokladalova, E., Dokládal, P., Caron, J.-F., Mesnil, R., Margerit, P., Charrier, M., Inline monitoring of 3D concrete printing using computer vision (2022) Additive Manufacturing, 60,  103175.
  36. Scherer, J.-M., Brach, S., Bleyer, J., An assessment of anisotropic phase-field models of brittle fracture (2022) Computer Methods in Applied Mechanics and Engineering, 395,  115036.
  37. de Sonis, E., Dépinoy, S., Giroux, P.-F., Maskrot, H., Lemarquis, L., Hercher, O., Villaret, F., Gourgues-Lorenzon, A.-F., Dependency of recrystallization kinetics on the solidification microstructure of 316L stainless steel processed by laser powder bed fusion (LPBF) (2022) Materials Characterization, 194,  112370.
  38. Victor-Manuel Trejo-Navas, Ante Buljac, François Hild, Thilo F. Morgeneyer, Marc Bernacki, Pierre-Olivier Bouchard, An examination of local strain fields evolution in ductile cast iron through micromechanical simulations based on 3D imaging. Journal of Theoretical, Computational and Applied Mechanics, 2022, pp.1-18.
  39. Tuhami, A.E.O., Feld-Payet, S., Quilici, S., Osipov, N., Besson, J., A two characteristic length nonlocal GTN model: Application to cup–cone and slant fracture (2022) Mechanics of Materials, 171, 104350.
  40. Upadhyay, M.V., Bleyer, J., Dislocation transport using a time-explicit Runge-Kutta discontinuous Galerkin finite element approach (2022) Modelling and Simulation in Materials Science and Engineering, 30 (3),  034002.
  41. Weisz-Patrault, D., Margerit, P., Constantinescu, A., Residual stresses in thin walled-structures manufactured by directed energy deposition: In-situ measurements, fast thermo-mechanical simulation and buckling (2022) Additive Manufacturing, 56,  102903.
  42. M. Zaid, V. Bonnand, V. Doquet, V. Chiaruttini, D. Pacou, P. Depouhon, Fatigue crack growth in bearing steel under cyclic mode II + static biaxial compression, International Journal of Fatigue, Vol. 163, 2022.


  1. Abdolhosseini Qomi, M.J., Brochard, L., Honorio, T., Maruyama, I., Vandamme, M., Advances in atomistic modeling and understanding of drying shrinkage in cementitious materials (2021) Cement and Concrete Research, 148,  106536.
  2. Albertini G, Lebihain M, Hild F, Ponson L, Kammer DS. Effective Toughness of Heterogeneous Materials with Rate-Dependent Fracture Energy. Phys Rev Lett 2021;127(3). 035501.
  3. Allena, R., Cluzel, C., Computational implementation of nonuniform orthotropic directions in the femoral diaphysis based on cortical bone microstructure to build a constitutive model (2021) Mathematics and Mechanics of Complex Systems, 9 (1), pp. 33-58.
  4. Archer, T., Beauchêne, P., Passilly, B., Roche, J.-M., Use of laser spot thermography for the non-destructive imaging of thermal fatigue microcracking of a coated ceramic matrix composite (2021) Quantitative InfraRed Thermography Journal, 18 (3), pp. 141-158.
  5. Audoly B, Neukirch S. A one-dimensional model for elastic ribbons: A little stretching makes a big difference. J Mech Phys Solids 2021;153. 104457
  6. Auffray, N., Abdoul-Anziz, H., Desmorat, B., Explicit harmonic structure of bidimensional linear strain-gradient elasticity (2021) European Journal of Mechanics, A/Solids, 87, 104202.
  7. Auger, T., Michel, V., Cassayre, L., Baketi, H., Barkia, B., Michel, A., Perrin, E., Liquid metal embrittlement and deformation induced martensite: The case of 316 L austenitic steel LME by liquid eutectic gallium-indium (2021) Corrosion Science, 192,  109850.
  8. Berny, M., Archer, T., Beauchêne, P., Mavel, A., Hild, F., Displacement Uncertainty Quantifications in T3-Stereocorrelation (2021) Experimental Mechanics, 61 (5), pp. 771-790.
  9. Bovet, C., Parret-Fréaud, A., Gosselet, P., Two-level adaptation for Adaptive Multipreconditioned FETI, (2021) Advances in Engineering Software, 152,  102952.
  10. Brisard, S., Tran, V.P., Sab, K., Morphology-dependent Hashin–Shtrikman bounds on the effective properties of stress-gradient materials (2021) European Journal of Mechanics, A/Solids, 85,  104072.
  11. Brochard L, Honório T. Thermo-poro-mechanics under adsorption applied to the anomalous thermal pressurization of water in undrained clays. Acta Geotech 2021;16(9):2713-2727.
  12. Chang X, Hallais S, Roux S, Danas K. Model reduction techniques for quantitative nano-mechanical AFM mode. Meas Sci Technol 2021;32(7), 075406
  13. Chebil, G., Lapouge, P., Renollet, Y., Davoine, C., Thomas, M., Favier, V., Schneider, M., Study of spatter ejections during laser-powder bed fusion process for aluminum alloys (2021) Journal of Laser Applications, 33 (4),  042047.
  14. Chen Y, Gélébart L, Marano A, Marrow J. FFT phase-field model combined with cohesive composite voxels for fracture of composite materials with interfaces. Comput Mech 2021;68(2):433-457.
  15. Davaze, V., Vallino, N., Langrand, B., Besson, J., Feld-Payet, S., A non-local damage approach compatible with dynamic explicit simulations and parallel computing (2021) International Journal of Solids and Structures, 228,  110999.
  16. De Francqueville F, Diani J, Gilormini P, Vandenbroucke A. Use of a micromechanical approach to understand the mechanical behavior of solid propellants. Mech Mater 2021;153, 103656
  17. Delourme, B., Lunéville, E., Marigo, J.-J., Maurel, A., Mercier, J.-F., Pham, K., A stable, unified model for resonant Faraday cages (2021) Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 477 (2245),  20200668.
  18. Desmorat, R., Auffray, N., Desmorat, B., Olive, M., Kolev, B., Minimal Functional Bases for Elasticity Tensor Symmetry Classes (2021) Journal of Elasticity, 147 (1-2), pp. 201-228.
  19. Diani, J., Castelnau, O., Chinesta, F., Contributions in mechanics of materials: Foreword [Foreword], (2021) Comptes Rendus – Mecanique, 348 (10-11), pp. 781-783.
  20. Ducousso, M., Cuenca, E., Marmonier, M., Videau, L., Coulouvrat, F., Berthe, L., Bulk Probing of Shock Wave Spatial Distribution in Opaque Solids by Ultrasonic Interaction (2021) Physical Review Applied, 15 (5),  L051002.
  21. El Gharbi, Y., Parret-Fréaud, A., Bovet, C., Gosselet, P., Two-level substructuring and parallel mesh generation for domain decomposition methods (2021) Finite Elements in Analysis and Design, 192,  103484.
  22. Fellah, C., Braun, J., Sauder, C., Sirotti, F., Berger, M.H., Impact of ex-PAN carbon fibers thermal treatment on the mechanical behavior of C/SiC composites and on the fiber/matrix coupling (2021) Carbon Trends, 5,  100107.
  23. Garcia, C., Hurmane, A., Irisarri, F.-X., Laurin, F., Leclercq, S., Desmorat, R., Experimental analysis and damage modeling of the shear-out failure mode of a 3D woven composite lug (2021) Composite Structures, 261,  113522.
  24. Guenoun G, Schmitt N, Roux S, Régnier G. Crystalline orientation assessment in transversely isotropic semicrystalline polymer: Application to oedometric compaction of PTFE. Polym Eng Sci 2021; 61(1):107-114.
  25. Guin, L., Jabbour, M.E., Shaabani-Ardali, L., Triantafyllidis, N., Revisiting step instabilities on crystal surfaces. Part II: General theory (2021) Journal of the Mechanics and Physics of Solids, 156, 104582.
  26. Hervé-Secourgeon, G., Hervé-Secourgeon, E., Bottoni, M., Voldoire, F., Razafimbelo, M., Gatuingt, F., Oliver-Leblond, C., Honorio, T., Kameh, A., Habib, S., Escoffier, F., On structural finite element modeling strategies and their influence on the optimization of final constructability of reinforced concrete structures (2021) Nuclear Engineering and Design, 385,  111541.
  27. Hun, D.-A., Yvonnet, J., Guilleminot, J., Dadda, A., Tang, A.-M., Bornert, M., Desiccation cracking of heterogeneous clayey soil: Experiments, modeling and simulations (2021) Engineering Fracture Mechanics, 258, 108065.
  28. Lebihain M, Ponson L, Kondo D, Leblond J-. Effective toughness of disordered brittle solids: A homogenization framework. J Mech Phys Solids 2021; 153, 104463
  29. Le Hong, T., Brachet, J.-C., Crépin, J., Le Saux, M., Combined effects of temperature and of high hydrogen and oxygen contents on the mechanical behavior of a zirconium alloy upon cooling from the βZr phase temperature range (2021) Journal of Nuclear Materials, 554, 153069.
  30. Leon Baldelli A, Marigo J-J, Pideri C. Analysis of Boundary Layer Effects Due to Usual Boundary Conditions or Geometrical Defects in Elastic Plates Under Bending: An Improvement of the Love-Kirchhoff Model. J Elast 2021;143(1):31-84.
  31. León Baldelli AA, Maurini C. Numerical bifurcation and stability analysis of variational gradient-damage models for phase-field fracture. J Mech Phys Solids 2021;152. 104424
  32. Lucchetta A, Auslender F, Bornert M, Kondo D. Incremental variational homogenization of elastoplastic composites with isotropic and Armstrong-Frederick type nonlinear kinematic hardening. Int J Solids Struct 2021; 222-223.  111000
  33. Lucchetta A, Brach S, Kondo D. Effects of particles size on the overall strength of nanocomposites: Molecular Dynamics simulations and theoretical modeling. Mech Res Commun 2021;114. 103669
  34. Li T, Abdelmoula R. Gradient Damage Analysis of a Cylinder Under Torsion: Bifurcation and Size Effects. J Elast 2021;143(2):209-237.
  35. Lu, X., Detrez, F., Yvonnet, J., Bai, J., Identification of elastic properties of interphase and interface in graphene-polymer nanocomposites by atomistic simulations (2021) Composites Science and Technology, 213,  108943.
  36. Luo, Y.-M., Chevalier, L., Monteiro, E., Utheza, F., Numerical simulation of self heating during stretch blow moulding of PET: viscohyperelastic modelling versus experimental results (2021) International Journal of Material Forming, 14 (4), pp. 703-714.
  37. Marano A, Gélébart L, Forest S. FFT-based simulations of slip and kink bands formation in 3D polycrystals: Influence of strain gradient crystal plasticity. J Mech Phys Solids 2021;149. 104295
  38. Marigo, J.-J., Pham, K., Maurel, A., Guenneau, S., Effective Model for Elastic Waves in a Substrate Supporting an Array of Plates/Beams with Flexural and Longitudinal Resonances (2021) Journal of Elasticity, 146 (1), pp. 143-177.
  39. Mezhoud, S., Le Droumaguet, B., Aimedieu, P., Monchiet, V., Bornert, M., Grande, D., Investigation of morphology associated with biporous polymeric materials obtained by the double porogen templating approach (2021) Colloid and Polymer Science, 299 (3), pp. 537-550.
  40. Morin, L., Kondo, D., An interphase approach of size effects in ductile porous materials (2021) International Journal of Fracture, 230 (1-2), pp. 71-82.
  41. Morin L, Brenner R, Derrien K, Dorhmi K. Periodic smoothing splines for FFT-based solvers. Comput Methods Appl Mech Eng 2021;373. 113549
  42. Neggers, J., Héripré, E., Bonnet, M., Boivin, D., Tanguy, A., Hallais, S., Gaslain, F., Rouesne, E., Roux, S., Principal image decomposition for multi-detector backscatter electron topography reconstruction, (2021) Ultramicroscopy, 227, 113200.
  43. Neukirch, S., Audoly, B., A convenient formulation of Sadowsky’s model for elastic ribbons (2021) Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 477 (2255),  20210548.
  44. Nguyen, C.-N., Cailletaud, G., Barbe, F., Marini, B., Nguyen, D.-D., Phan, H.-T., Identification of crystal plasticity parameters for a non-irradiated and irradiated A508 bainite steel (2021) Metallurgical Research and Technology, 118 (2), 204.
  45. Pham, K., Maurel, A., Marigo, J.-J., Revisiting imperfect interface laws for two-dimensional elastodynamics (2021) Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 477 (2245), 20200519.
  46. Olive, M., Auffray, N., Symmetry classes in piezoelectricity from second-order symmetries (2021) Mathematics and Mechanics of Complex Systems, 9 (1), pp. 77-105.
  47. Savine, F., Irisarri, F.-X., Julien, C., Vincenti, A., Guerin, Y., A component-based method for the optimization of stiffener layout on large cylindrical rib-stiffened shell structures (2021) Structural and Multidisciplinary Optimization, 64 (4), pp. 1843-1861.
  48. Scherer, J.-M., Besson, J., Forest, S., Hure, J., Tanguy, B., A strain gradient plasticity model of porous single crystal ductile fracture (2021) Journal of the Mechanics and Physics of Solids, 156, 104606
  49. Sciuti, V.F., Canto, R.B., Neggers, J., Hild, F., On the benefits of correcting brightness and contrast in global digital image correlation: Monitoring cracks during curing and drying of a refractory castable (2021) Optics and Lasers in Engineering, 136, 106316.
  50. X. Truant, G. Cailletaud, F. Fournier dit Chabert, I. Guillot, S. Kruch, Cyclic elastoplastic behaviour of 2198-T8 aluminium alloy welded panels, Continuum Mechanics and Thermodynamics, Vol. 33, No. 4, pp. 1691-1707, 2021.
  51. Upadhyay, M.V., Slama, M.B.H., Gaudez, S., Mohanan, N., Yedra, L., Hallais, S., Héripré, E., Tanguy, A., Non-oxide precipitates in additively manufactured austenitic stainless steel, (2021) Scientific Reports, 11 (1), 10393.
  52. Weisz-Patrault D, Sakout S, Ehrlacher A. Energetic upscaling strategy for grain growth. II: Probabilistic macroscopic model identified by Bayesian techniques. Acta Mater 2021; 210, 116805
  53. Zuo, W., Wei, L., Du, Z., Li, P., Wu, Y., She, W., Design of robust Self-Compacting concrete based on analysis of component properties (2021) Construction and Building Materials, 301, 124063.
  54. Zouari, A., Bono, M., Boulch, D.L., Jolu, T.L., Crépin, J., Besson, J., The effect of strain biaxiality on the fracture of zirconium alloy fuel cladding (2021) Journal of Nuclear Materials, 554, 153070.


  1. Abramian S, Desmorat B, Desmorat R, Kolev B, Olive M. Recovering the Normal Form and Symmetry Class of an Elasticity Tensor. J Elast 2020;142(1). 1–33
  2. T. Archer, P. Beauchêne, M. Berny, F. Hild, Creep behavior identification of an environmental barrier coating using full-field measurements, Journal of the European Ceramic Society, Vol. 40, 15, 2020.
  3. T. Archer, P. Beauchêne, C. Huchette, F. Hild, Global digital image correlation up to very high temperatures with grey level corrections, Measurement Science and Technology, 31 (2), 2020.
  4. A Ask, S. Forest, B. Appolaire, K. Ammar, Microstructure evolution in deformed polycrystals predicted by a diffuse interface Cosserat approach, Advanced Modeling and Simulation in Engineering Sciences, Vol. 7, Article 9, 2020.
  5. Barkia B, Aubry P, Haghi-Ashtiani P, Auger T, Gosmain L, Schuster F, et al. On the origin of the high tensile strength and ductility of additively manufactured 316L stainless steel: Multiscale investigation. J Mater Sci Technol 2020;41:209-218.
  6. Beauchesne CC, Chabanon M, Smaniotto B, Ladoux B, Goyeau B, David B. Channeling Effect and Tissue Morphology in a Perfusion Bioreactor Imaged by X-Ray Microtomography. Tissue Eng Regen Med 2020;17(3), p. 301-311.
  7. Berge-Thierry, C., Voldoire, F., Ragueneau, F., Lopez-Caballero, F., Le Maoult, A., Main Achievements of the Multidisciplinary SINAPS@ Research Project: Towards an Integrated Approach to Perform Seismic Safety Analysis of Nuclear Facilities. Pure and Applied Geophysics 2020; 177 (5), pp. 2299-2351.
  8. V. Bonnand, V. Chiaruttini, R. Langlois, R. Cusset, J. Hosdez, B. Blaysat, L. Menut-Tournadre, J. Neggers, M. Coret, J. Henry, V. Doquet, M. Grédiac, M. Poncelet, H. Proudhon, N. Limodin, J. Rethore , Multi-partner benchmark experiment of fatigue crack growth measurements, Engineering Fracture Mechanics, Vol. 235, 2020.
  9. Bonnet P, Yastrebov VA, Queutey P, Leroyer A, Mangeney A, Castelnau O, et al. Modelling capsizing icebergs in the open ocean. Geophys J Int 2020;223(2):1265-1287.
  10. Bouaziz R, Truffault L, Borisov R, Ovalle C, Laiarinandrasana L, Miquelard-Garnier G, et al. Elastic properties of polychloroprene rubbers in tension and compression during ageing. Polym 2020, 12(10), p. 1-14.
  11. Brochard L, Honório T. Revisiting thermo-poro-mechanics under adsorption: Formulation without assuming Gibbs-Duhem equation. Int J Eng Sci 2020, 152. 103296 
  12. Chen Y, Gélébart L, Chateau C, Bornert M, King A, Sauder C, et al. Crack initiation and propagation in braided SiC/SiC composite tubes: Effect of braiding angle. J Eur Ceram Soc 2020, 40(13), p.4403-4418.
  13. Chen Y, Lorentz E, Besson J. Crack initiation and propagation in small-scale yielding using a nonlocal GTN model. Int J Plast 2020, 130, 102701
  14. Chen Y, Gélébart L, Chateau C, Bornert M, King A, Aimedieu P, et al. 3D Detection and Quantitative Characterization of Cracks in a Ceramic Matrix Composite Tube Using X-Ray Computed Tomography. Exp Mech 2020;60(3):409-424.
  15. V. Chiaruttini, V. Maurel, M. Abecassis, A. Köster, S. Dezecot, Influence of a 3D realistic crack path in the driving forces for fatigue crack growth under mode I+II loading, Theoretical and Applied Fracture Mechanics Vol. 108, 2020.
  16. Combescure C, Elliott RS, Triantafyllidis N. Deformation patterns and their stability in finitely strained circular cell honeycombs. J Mech Phys Solids 2020, 142, 103976
  17. Dassonville T., Poncelet M., Auffray N., Toward a homogenizing machine, International Journal of Solids and Structures, 2020; 191–192 : 534-549
  18. De Francqueville F, Gilormini P, Diani J, Vandenbroucke A. Comparison of the finite strain macroscopic behavior and local damage of a soft matrix highly reinforced by spherical or polyhedral particles. Eur J Mech A Solids 2020;84.
  19. De Francqueville F, Gilormini P, Diani J, Vandenbroucke A. Relationship between local damage and macroscopic response of soft materials highly reinforced by monodispersed particles. Mech Mater 2020, 146, 103408
  20. S. Feld-Payet, B. Langrand, V. Davaze, N. Vallino, J. Besson, Plastic and fracture behavior of a dual phase steel sheet under quasi-static and dynamic loadings, Engineering Fracture Mechanics Volume 235, 2020.
  21. Fellah C, Braun J, Sauder C, Sirotti F, Berger M-. Influence of the carbon interface on the mechanical behavior of SiC/SiC composites. Compos Part A Appl Sci Manuf 2020, 133, 105867
  22. Ferreira, E., Dal, M., Colin, C., Marion, G., Gorny, C., Courapied, D., Guy, J., Peyre, P., Experimental and numerical analysis of gas/powder flow for different LMD nozzles, Metals 2020, 10 (5), 667
  23. Forest S, Sab K. Finite-deformation second-order micromorphic theory and its relations to strain and stress gradient models. Math Mech Solids 2020;25(7):1429-1449.
  24. C. Garcia, A. Hurmane, F.-X. Irisarri, F. Laurin, S. Leclercq, R. Desmorat, Experimental analysis and damage modeling of the shear-out failure mode of a 3D woven composite lug, Composite Strcutures, Vol. 261, 2020.
  25. Gineau A, Longatte E, Lucor D, Sagaut P. Macroscopic model of fluid structure interaction in cylinder arrangement using theory of mixture. Comput Fluids 2020, 202, 104499
  26. Goyal A, Doquet V, Pouya A. Grain Boundary Sliding and Strain Rate Sensitivity of Coarse and Fine/Ultrafine Grained 5083 Aluminum Alloys. Metall Mat Trans A Phys Metall Mat Sci 2020;51(3):1109-1122.
  27. Guenoun G, Faou J-, Régnier G, Schmitt N, Roux S. PTFE crystallization mechanisms: Insight from calorimetric and dilatometric experiments. Polymer 2020, 193, 122333
  28. Guin L, Jabbour ME, Shaabani-Ardali L, Benoit-Maréchal L, Triantafyllidis N. Stability of Vicinal Surfaces: Beyond the Quasistatic Approximation. Phys Rev Lett 2020;124(3):036101.
  29. Hosdez J, Limodin N, Najjar D, Witz J-, Charkaluk E, Osmond P, et al. Fatigue crack growth in compacted and spheroidal graphite cast irons. Int J Fatigue 2020;131: 105319
  30. Hütter G, Sab K, Forest S. Kinematics and constitutive relations in the stress-gradient theory: interpretation by homogenization. Int J Solids Struct 2020;193-194, p.90-97.
  31. Langlois R, Cusset R, Hosdez J, Bonnand V, Blaysat B, Menut-Tournadre L, et al. Multi-partner benchmark experiment of fatigue crack growth measurements. Eng Fract Mech 2020, 235, 107157
  32. Lazarus V, Prabel B, Cambonie T, Leblond JB. Mode I+III multiscale cohesive zone model with facet coarsening and overlap: Solutions and applications to facet orientation and toughening. J Mech Phys Solids 2020, 141, 104007
  33. Lebihain M, Leblond J-, Ponson L. Effective toughness of periodic heterogeneous materials: the effect of out-of-plane excursions of cracks. J Mech Phys Solids 2020, 137. 103876
  34. Le Hong T, Turque I, Brachet J-, Crépin J, André G, Barres Q, et al. Phase transformations during cooling from the βZr phase temperature domain in several hydrogen-enriched zirconium alloys studied by in situ and ex situ neutron diffraction. Acta Mater 2020, 199, p.453-468.
  35. Ma Z, Le Tallec P, Maitournam H. An energy-based strategy for fatigue analysis in presence of general multi-axial time varying loadings. Int J Fatigue 2020;132. 105367
  36. Marano A, Gélébart L. Non-linear composite voxels for FFT-based explicit modeling of slip bands: Application to basal channeling in irradiated Zr alloys. Int J Solids Struct 2020, 198, 110-125.
  37. Marigo J-, Pham K, Maurel A, Guenneau S. Effective model for elastic waves propagating in a substrate supporting a dense array of plates/beams with flexural resonances. J Mech Phys Solids 2020, 143, 104029
  38. Marti N, Favier V, Gregori F, Saintier N. Correlation of the low and high frequency fatigue responses of pure polycrystalline copper with mechanisms of slip band formation. Mater Sci Eng A 2020; 772:138619
  39. Mezhoud S., Monchiet V., Bornert M., Grande D., Computation of macroscopic permeability of doubly porous media with FFT based numerical homogenization method (2020) Eur. J. Mech. B/Fluids, 83, pp. 141 – 155.
  40. Monaldo E, Brach S, Kondo D, Vairo G. Effective mechanical response of non-linear heterogeneous materials comprising bimodular phases. Eur J Mech A Solids 2020, 81, 103962
  41. Mofakhami, E., Tencé-Girault, S., Perrin, J., Scheel, M., Gervat, L., Ovalle, C., Laiarinandrasana, L., Fayolle, B., Miquelard-Garnier, G. Microstructure-mechanical properties relationships in vibration welded glass-fiber-reinforced polyamide 66: A high-resolution X-ray microtomography study, Polymer Testing 2020, 85, p. 106454
  42. Nguyen AN, Solard J, Nong HTT, Osman CB, Gomez A, Bockelée V, Tencé-Girault, S et al. Spin coating and micro-patterning optimization of composite thin films based on PVDF. Mater 2020, 13 (6), 1342.
  43. Olive M, Desmorat B, Kolev B, Desmorat R. Reduced algebraic conditions for plane or axial tensorial symmetries. Math Mech Solids 2020;25(12):2155-2177.
  44. Olive M, Desmorat B, Kolev B, Desmorat R. On the Determination of Plane and Axial Symmetries in Linear Elasticity and Piezo-Electricity. J Elast 2020, 141(1), p147-163.
  45. Oliveira H, Louf F, Hervé-Secourgeon E, Gatuingt F. Wall-slab joint parameter identification of a reinforced concrete structure using possibly corrupted modal data. Int J Numer Anal Methods Geomech 2020;44(1):19-39.
  46. Sakout S, Weisz-Patrault D, Ehrlacher A. Energetic upscaling strategy for grain growth. i: Fast mesoscopic model based on dissipation. Acta Mater 2020, 196, p.261-279.
  47. O. Sally, F. Laurin, C. Julien, R. Desmorat, F. Bouillon, An efficient computational strategy of cycle-jumps dedicated to fatigue of composite structures, International Journal of Fatigue, Vol. 135, 2020.
  48. Scherer J-, Phalke V, Besson J, Forest S, Hure J, Tanguy B. Lagrange multiplier based vs micromorphic gradient-enhanced rate-(in)dependent crystal plasticity modelling and simulation. Comput Methods Appl Mech Eng 2020;372. Article number 113426 https://doi.org/10.1016/j.cma.2020.113426
  49. Szmytka F, Charkaluk E, Constantinescu A, Osmond P. Probabilistic Low Cycle Fatigue criterion for nodular cast-irons. Int J Fatigue 2020, 139, 105701
  50. Touboul M, Pham K, Maurel A, Marigo J-, Lombard B, Bellis C. Effective Resonant Model and Simulations in the Time-Domain of Wave Scattering from a Periodic Row of Highly-Contrasted Inclusions. J Elast 2020;142(1):53-82.
  51. Viard A-, Dirrenberger J, Forest S. Propagating material instabilities in planar architectured materials. Int J Solids Struct 2020, 202, p.532-551.
  52. Wang Y, Charbal A, Dufour JE, Hild F, Roux S, Vincent L. Hybrid Multiview Correlation for Measuring and Monitoring Thermomechanical Fatigue Test. Exp Mech 2020;60(1):13-33.


  1. Baruffi, Carolina; Finel, Alphonse; Bouar, Yann Le; Bacroix, Brigitte; Salman, Oguz Umut, Overdamped langevin dynamics simulations of grain boundary motion, Materials Theory, vol. 3, no. 1, 2019.
  2. Berge-Thierry C, Voldoire F, Ragueneau F, Lopez-Caballero F, Le Maoult A. Main Achievements of the Multidisciplinary SINAPS@ Research Project: Towards an Integrated Approach to Perform Seismic Safety Analysis of Nuclear Facilities. Pure Appl Geophys 2019.
  3. Braun J, Sauder C, Lamon J, Balbaud-Célérier F. Influence of an original manufacturing process on the properties and microstructure of SiC/SiC tubular composites. Compos Part A Appl Sci Manuf 2019; 123:170-179.
  4. Carpiuc-Prisacari A, Jailin C, Poncelet M, Kazymyrenko K, Leclerc H, Hild F. Experimental database of mixed-mode crack propagation tests performed on mortar specimens with a hexapod and full-field measurements. Part II: interactive loading. Cem Concr Res 2019;125. Article number 105867.
  5. Chen Y, Gélébart L, Chateau C, Bornert M, Sauder C, King A. Analysis of the damage initiation in a SiC/SiC composite tube from a direct comparison between large-scale numerical simulation and synchrotron X-ray micro-computed tomography. Int J Solids Struct 2019; 161:111-126.
  6. Corfdir A, Bonnet G. The degenerate scales of BIEs for conduction in piecewise homogeneous domains. Eng Anal Boundary Elem 2019; 98:281-295.
  7. De Angelo M, Spagnuolo M, D’Annibale F, Pfaff A, Hoschke K, Misra A, et al. The macroscopic behavior of pantographic sheets depends mainly on their microstructure: experimental evidence and qualitative analysis of damage in metallic specimens. Continuum Mech Thermodyn (2019) 31: 1181- 1203.
  8. Dell’Isola F, Seppecher P, Spagnuolo M, Barchiesi E, Hild F, Lekszycki T, et al. Advances in pantographic structures: design, manufacturing, models, experiments and image analyses. Continuum Mech Thermodyn 2019;31(4):1231-1282.
  9. Dell’Isola F, Seppecher P, Alibert JJ, Lekszycki T, Grygoruk R, Pawlikowski M, et al. Pantographic metamaterials: an example of mathematically driven design and of its technological challenges. Continuum Mech Thermodyn 2019;31(4):851-884.
  10. Desmorat B, Auffray N. Space of 2D elastic materials: a geometric journey. Continuum Mech Thermodyn 2019;31(4):1205-1229.
  11. Desmorat R, Auffray N, Desmorat B, Kolev B, Olive M. Generic separating sets for three-dimensional elasticity tensors. Proc R Soc A Math Phys Eng Sci 2019;475(2226).
  12. Dezecot S, Rambaudon M, Koster A, Szmytka F, Maurel V, Buffiere J-Y. Fatigue crack growth under large scale yielding condition in a cast automotive aluminum alloy. Mater Sci Eng A 2019; 743:87-97.
  13. Duballet R, Baverel O, Dirrenberger J. Space Truss Masonry Walls With Robotic Mortar Extrusion. Structures 2019; 18:41-47.
  14. De Francqueville F, Gilormini P, Diani J. Representative volume elements for the simulation of isotropic composites highly filled with monosized spheres. Int J Solids Struct 2019; 158:277-286.
  15. Gu T, Medy J-, Klosek V, Castelnau O, Forest S, Hervé-Luanco E, et al. Multiscale modeling of the elasto-plastic behavior of architectured and nanostructured Cu-Nb composite wires and comparison with neutron diffraction experiments. Int J Plast 2019;122:1-30.
  16. Guenoun G, Faou J-Y, Régnier G, Schmitt N, Roux S. Thermal cycling of cold-pressed PTFE compacts: Reversible and irreversible behavior. Polym Test 2019; 75:99-106.
  17. Hériveaux Y, Nguyen V-, Brailovski V, Gorny C, Haïat G. Reflection of an ultrasonic wave on the bone-implant interface: Effect of the roughness parameters. J Acoust Soc Am 2019;145(6):3370-3381.
  18. Hosdez J, Langlois M, Witz J-F, Limodin N, Najjar D, Charkaluk E, Osmond P., Forre A., Szmytka F. Plastic zone evolution during fatigue crack growth: Digital image correlation coupled with finite elements method. Int J Solids Struct 2019; 171:92-102.
  19. Hun D.-A., Guilleminot J., Yvonnet J., Bornert M., Stochastic multiscale modeling of crack propagation in random heterogeneous media (2019) Int. J. Num. Meth. Engin, 119 (13), pp. 1325 – 1344.
  20. Jailin C, Buljac A, Bouterf A, Hild F, Roux S. Fast four-dimensional tensile test monitored via X-ray computed tomography: Elastoplastic identification from radiographs. J Strain Anal Eng Des 2019; 54(1):44-53.
  21. Jaumier T, Vincent S, Vincent L, Desmorat R. Creep and damage anisotropies of 9%Cr and 14%Cr ODS steel cladding. J Nucl Mater 2019; 518:274-286.
  22. Kodjo K-M, Yvonnet J, Karkri M, Sab K. Multiscale modeling of the thermomechanical behavior in heterogeneous media embedding Phase Change Materials particles. J Comput Phys 2019; 378:303-323.
  23. Lavazec D, Cumunel G, Duhamel D, Soize C. Experimental evaluation and model of a nonlinear absorber for vibration attenuation. Comm Nonlinear Sci Numer Simul 2019;69:386-397.
  24. Legendre J, Créac’hcadec R, Tanguy A, Hallais S, Schmitt JH, Héripré E, et al. A unique combination of in-situ and multi-scale methodologies to analyze damage mechanisms of temper rolled zinc coating. Mater Sci Eng A 2019;763 : Article number 138156.
  25. Li J, Leguillon D, Martin E, Zhang X-. Numerical implementation of the coupled criterion for damaged materials. Int J Solids Struct 2019; 165:93-103.
  26. Lo Feudo S, Touzé C, Boisson J, Cumunel G. Nonlinear magnetic vibration absorber for passive control of a multi–storey structure. J Sound Vib 2019; 438:33-53.
  27. Lucchetta A, Auslender F, Bornert M, Kondo D. A double incremental variational procedure for elastoplastic composites with combined isotropic and linear kinematic hardening. Int J Solids Struct 2019; 158:243-267.
  28. Marano A, Gélébart L, Forest S. Intragranular localization induced by softening crystal plasticity: Analysis of slip and kink bands localization modes from high resolution FFT-simulations results. Acta Mater 2019;175:262-275.
  29. Margerit P, Lebée A, Caron J-, Ege K, Boutillon X. The High-Resolution Wavevector Analysis for the characterization of the dynamic response of composite plates. J Sound Vib 2019;458:177-196.
  30. Marigo J-J, Kazymyrenko K. A micromechanical inspired model for the coupled to damage elasto-plastic behavior of geomaterials under compression. Mec Ind 2019; 20(1).
  31. Maurel A, Pham K, Marigo J-J. Scattering of gravity waves by a periodically structured ridge of finite extent. J Fluid Mech 2019; 871:350-376.
  32. Maurel A, Mercier J-, Pham K, Marigo J-J, Ourir A. Enhanced resonance of sparse arrays of Helmholtz resonators – Application to perfect absorption. J Acoust Soc Am 2019; 145(4):2552-2560.
  33. Meng L, Goyal A, Doquet V, Ranc N, Couzinié J-. Ultrafine versus coarse grained Al 5083 alloys: From low-cycle to very-high-cycle fatigue. Int J Fatigue 2019; 121:84-97.
  34. Nait Abdelaziz M, Ayoub G, Colin X, Benhassine M, Mouwakeh M. New developments in fracture of rubbers: Predictive tools and influence of thermal aging. Int J Solids Struct 2019;165:127-136.
  35. R. Naylor, C. Fagiano, M. Hirsekorn, Y. Renollet, F. Hild, B. Tranquart, E. Baranger, Mechanically Regularized FE DIC for Heterogeneous Materials, Experimental Mechanics Vol. 59, No. 8, pp. 1159-1170, 2019.
  36. Otsuka T, Satani D, Yamamoto K, Okamura K, Brenner R, Bacroix B. Microstructure and heat treatment effect on transformation strain in steels: part 1 : experiment. Mater Sci Technol 2019; 35(2):181-186.
  37. Otsuka T, Satani D, Yamamoto K, Okamura K, Brenner R, Bacroix B. Microstructure and heat treatment effect on transformation strain in steels: part 2: modelling. Mater Sci Technol 2019; 35(2):187-194.
  38. Perlade A, Antoni A, Besson R, Caillard D, Callahan M, Emo J, Gourgues A-F., Maugis P., Mestrallet A., Thuinet L., Tonizzo Q., Schmitt J-H. Development of 3rd generation Medium Mn duplex steels for automotive applications. Mater Sci Technol 2019; 35(2):204-219.
  39. Salman O, Muite B, Finel A. Origin of stabilization of macrotwin boundaries in martensites. Eur Phys J B 2019; 92(1). Article number 20.
  40. Salman O., Vitale G, Truskinovsky L. Continuum theory of bending-to-stretching transition. Phys Rev E 2019;100(5). Article number 051001.
  41. Sergeant A, Mangeney A, Yastrebov VA, Walter F, Montagner J-, Castelnau O, et al. Monitoring Greenland ice sheet buoyancy-driven calving discharge using glacial earthquakes. Ann Glaciol 2019;60(79):75-95.
  42. Spyrou LA, Brisard S, Danas K. Multiscale modeling of skeletal muscle tissues based on analytical and numerical homogenization. J Mech Behav Biomed Mater 2019; 92:97-117. https://doi.org/10.1016/j.jmbbm.2018.12.030
  43. Thibeaux R, Duval H, Smaniotto B, Vennat E, Néron D, David B. Assessment of the interplay between scaffold geometry, induced shear stresses, and cell proliferation within a packed bed perfusion bioreactor. Biotechnol Prog 2019;e2880
  44. Trejo Navas VM, Buljac A, Hild F, Morgeneyer T, Helfen L, Bernacki M, Bouchard P-O. A comparative study of image segmentation methods for micromechanical simulations of ductile damage. Comput Mater Sci 2019; 159:43-65.
  45. Trinh VH, Langlois V, Guilleminot J, Perrot C, Khidas Y, Pitois O. Tuning membrane content of sound absorbing cellular foams: Fabrication, experimental evidence and multiscale numerical simulations. Mater Des 2019; 162:345-361.
  46. Wang Z-, Poh LH, Zhu Y, Dirrenberger J, Forest S. Systematic design of tetra-petals auxetic structures with stiffness constraint. Mater Des 2019; 170 : Article number 107669.
  47. Wang Y, Charbal A, Hild F, Roux S, Vincent L. Crack initiation and propagation under thermal fatigue of austenitic stainless steel. Int J Fatigue 2019; 124:149-166.
  48. Weisz-Patrault D, Gantier M, Ehrlacher A. Mixed analytic/energetic approach for a sliding orthotropic hollow cylinder. Application to coil sagging. Int J Solids Struct 2019; 165:75-92.


  1. Alessi R, Marigo J-J, Maurini C, Vidoli S. Coupling damage and plasticity for a phase-field regularisation of brittle, cohesive and ductile fracture: One-dimensional examples. Int J Mech Sci 2018; 149:559-576.
  2. Anoukou K, Brenner R, Hong F, Pellerin M, Danas K. Random distribution of polydisperse ellipsoidal inclusions and homogenization estimates for porous elastic materials. Comput Struct 2018; 210:87-101.
  3. Ask A, Forest S, Appolaire B, Ammar K, Salman O.U. A Cosserat crystal plasticity and phase field theory for grain boundary migration. J Mech Phys Solids 2018; :167-194.
  4. Barkia B, Courouau JL, Perrin E, Lorentz V, Rivollier M, Robin R, Nicolas L., Cabet C., Auger T. Investigation of crack propagation resistance of 304L, 316L and 316L(N) austenitic steels in liquid sodium. J Nucl Mater 2018; 507:15-23.
  5. Buljac A, Hild F, Helfen L, Morgeneyer TF. On deformation and damage micromechanisms in strong work hardening 2198 T3 aluminium alloy. Acta Mater 2018; 149:29-45.
  6. Buljac A, Helfen L, Hild F, Morgeneyer TF. Effect of void arrangement on ductile damage mechanisms in nodular graphite cast iron: In situ 3D measurements. Eng Fract Mech 2018; 192:242-261. 
  7. Buljac A, Taillandier-Thomas T, Helfen L, Morgeneyer TF, Hild F. Evaluation of measurement uncertainties of digital volume correlation applied to laminography data. J Strain Anal Eng Des 2018; 53(2):49-65. 
  8. Buljac A, Trejo Navas V-, Shakoor M, Bouterf A, Neggers J, Bernacki M, et al. On the calibration of elastoplastic parameters at the microscale via X-ray microtomography and digital volume correlation for the simulation of ductile damage. Eur J Mech A Solids 2018; 72:287-297.
  9. Chamoin L, Legoll F. A posteriori error estimation and adaptive strategy for the control of MsFEM computations. Comput Methods Appl Mech Eng 2018; 336:1-38.
  10. Charbal A, Roux S, Hild F, Vincent L. Spatiotemporal regularization for digital image correlation: Application to infrared camera frames. Int J Numer Methods Eng 2018; 114(12):1331-1349.
  11. Charbal A, Roux S, Hild F, Vincent L. Regularised digital-level corrections for infrared image correlation. Quant InfraRed Thermography J 2018; 15(2):172-193.
  12. Chateau C., Nguyen TT, Bornert M, Yvonnet J. DVC-based image subtraction to detect microcracking in lightweight concrete. Strain 2018; 54(5).
  13. Chaumun E, Crépin J, Duhamel C, Guerre C, Héripré E, Sennour M, et al. Stress corrosion cracking initiation of alloy 82 in hydrogenated steam. Miner Met Mater Ser 2018; Part F9:175-189. 
  14. Corfdir A, Bonnet G. Degenerate scale for 2D Laplace equation with mixed boundary condition and comparison with other conditions on the boundary. Eng Anal Boundary Elem 2018;88:14-25.
  15. Deboeuf S, Lenoir N, Hautemayou D, Bornert M, Blanc F, Ovarlez G. Imaging non-Brownian particle suspensions with X-ray tomography: Application to the microstructure of Newtonian and viscoplastic suspensions. J Rheol 2018; 62(2):643-662.
  16. Dell’Isola F, Seppecher P, Alibert JJ, Lekszycki T, Grygoruk R, Pawlikowski M, et al. Pantographic metamaterials: an example of mathematically driven design and of its technological challenges. Continuum Mech Thermodyn 2018:1-34.
  17. Desmorat R, Desmorat B, Olive M, Kolev B. Micromechanics based framework with second-order damage tensors. Eur J Mech A Solids 2018; 69:88-98.
  18. Duhamel C, Sennour M, Georgi F, Guerre C, Chaumun E, Crépin J, Héripré E., de Curières I., Characterization of oxide scales formed on alloy 82 in nominal PWR primary water at 340 °C and in hydrogenated steam at 400 °C. Corros Sci 2018; 131:386-403.
  19. Dufrenoy S, Chauveau T, Lemaire-Caron I, Brenner R, Bacroix B. Comparison of 2 methodologies developed for the determination of residual stresses through X-ray diffraction: application to a textured hcp titanium alloy. Int J Mater Form 2018; 11(3):341-355.
  20. Gatti F, Touhami S, Lopez-Caballero F, Paolucci R, Clouteau D, Alves Fernandes V, Kham M., Voldoire F. Broad-band 3-D earthquake simulation at nuclear site by an all-embracing source-to-structure approach. Soil Dyn Earthqu Eng 2018; 115:263-280.
  21. Grabois TM, Neggers J, Ponson L, Hild F, Toledo Filho RD. On the validation of integrated DIC with tapered double cantilever beam tests. Eng Fract Mech 2018; 191:311-323.
  22. Guilhem Y, Basseville S, Curtit F, Stéphan J-M, Cailletaud G. Numerical analysis of the effect of surface roughness on mechanical fields in polycrystalline aggregates. Modell Simul Mater Sci Eng 2018; 26(4).
  23. Hadjem-Hamouche Z, Derrien K, Héripré E, Chevalier J-P. In-situ experimental and numerical studies of the damage evolution and fracture in a Fe-TiB2 composite. Mater Sci Eng A 2018; 724:594-605.
  24. Honorio T, Brochard L, Vandamme M, Lebée A. Flexibility of nanolayers and stacks: Implications in the nanostructuration of clays. Soft Matter 2018 (36):7354-7367.  
  25. Huang Q, Charles Y, Duhamel C, Gasperini M, Crepin J. Mechanical fields on cross-shaped specimens for stress corrosion cracking of cold-worked austenitic stainless steels. Mater Sci Forum 2018; 941 MSF:1722-1727.
  26. Jailin C, Buljac A, Bouterf A, Hild F, Roux S. Fast four-dimensional tensile test monitored via X-ray computed tomography: Single projection–based digital volume correlation dedicated to slender samples. J Strain Anal Eng Des 2018; 53(7):473-484.
  27. Langlois V, Trinh VH, Lusso C, Perrot C, Chateau X, Khidas Y, Pitois O., Permeability of solid foam: Effect of pore connections. Phys Rev E 2018; 97(5).
  28. Leblond J-B, Kondo D, Morin L, Remmal A. Classical and sequential limit analysis revisited. C R Mec 2018; 346(4):336-349.
  29. Le DT, Marigo J-J, Maurini C, Vidoli S. Strain-gradient vs damage-gradient regularizations of softening damage models. Comput Methods Appl Mech Eng 2018; 340:424-450.
  30. Li J, Leguillon D. Finite element implementation of the coupled criterion for numerical simulations of crack initiation and propagation in brittle materials. Theor Appl Fract Mech 2018; 93:105-115.
  31. Li J, Martin E, Leguillon D, Dupin C. A finite fracture model for the analysis of multi-cracking in woven ceramic matrix composites. Compos Part B: Eng 2018; 139:75-83.
  32. Lu X, Yvonnet J, Detrez F, Bai J. Low electrical percolation thresholds and nonlinear effects in graphene-reinforced nanocomposites: A numerical analysis. J Compos Mater 2018;52(20):2767-2775.
  33. Mahmood O, Audoly B, Roux S. Cracks in Tension-Field Elastic Sheets. Phys Rev Lett 2018; 121(14).
  34. Margerit P, Lebée A, Caron J-F, Boutillon X. High Resolution Wavenumber Analysis (HRWA) for the mechanical characterisation of viscoelastic beams. J Sound Vib 2018; 433:198-211.
  35. Maurel, A., Marigo, J. -J., Mercier, J. -., & Pham, K. (2018). Modelling resonant arrays of the helmholtz type in the time domain. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 474(2210) Article number 20170894
  36. Maurel A, Marigo J-J, Pham K, Guenneau S. Conversion of Love waves in a forest of trees. Phys Rev B 2018; 98(13).
  37. Nifa N, Aubry D, Corus M. An explicit-implicit projection approach for solving saddle-point systems arising from parameter identification problems. Comput Struct 2018; 203:1-17.
  38. Olive M, Kolev B, Desmorat B, Desmorat R. Harmonic Factorization and Reconstruction of the Elasticity Tensor. J Elast 2018; 132(1):67-101.
  39. Oumaziz P, Gosselet P, Boucard P-A, Abbas M. A parallel noninvasive multiscale strategy for a mixed domain decomposition method with frictional contact. Int J Numer Methods Eng 2018; 115(8):893-912..
  40. Otsuka T, Brenner R, Bacroix B. FFT-based modelling of transformation plasticity in polycrystalline materials during diffusive phase transformation. Int J Eng Sci 2018; 127:92-113.
  41. Poncelet M, Somera A, Morel C, Jailin C, Auffray N. An experimental evidence of the failure of Cauchy elasticity for the overall modeling of a non-centro-symmetric lattice under static loading. Int J Solids Struct 2018;147:223-237.
  42. Rapti I, Lopez-Caballero F, Modaressi-Farahmand-Razavi A, Foucault A, Voldoire F. Liquefaction analysis and damage evaluation of embankment-type structures. Acta Geotech 2018; 13(5):1041-1059.
  43. Rovinelli A, Sangid MD, Proudhon H, Guilhem Y, Lebensohn RA, Ludwig W. Predicting the 3D fatigue crack growth rate of small cracks using multimodal data via Bayesian networks: In-situ experiments and crystal plasticity simulations. J Mech Phys Solids 2018; 115:208-229.
  44. Salmon-Legagneur H, Vincent S, Garnier J, Gourgues-Lorenzon AF, Andrieu E. Anisotropic intergranular damage development and fracture in a 14Cr ferritic ODS steel under high-temperature tension and creep. Mater Sci Eng A 2018; 722:231-241.
  45. Samb F, Berthaud Y, Ba M, Fall M, Benboudjema F. Nonlinear Mechanical Behavior Analysis of Flexible Lateritic Pavements of Senegal (West Africa) by FEM for M.-E. Pavement Design. Geotech Geol Eng 2018; 36(5):2939-2956.
  46. Tanné E, Li T, Bourdin B, Marigo J-J, Maurini C. Crack nucleation in variational phase-field models of brittle fracture. J Mech Phys Solids 2018; 110:80-99.
  47. Tran VP, Brisard S, Guilleminot J, Sab K. Mori–Tanaka estimates of the effective elastic properties of stress-gradient composites. Int J Solids Struct 2018; 146:55-68.
  48. Zghal J, Moreau K, Moës N, Leguillon D, Stolz C. Analysis of the failure at notches and cavities in quasi-brittle media using the Thick Level Set damage model and comparison with the coupled criterion. Int J Fract 2018; 211(1-2):253-280.


  1. Basseville S, Cailletaud G, Ghidossi T, Guilhem Y, Lacoste E, Proudhon H, Signor L., Villechaise P. Numerical analysis on the local mechanical fields in polycrystalline 316LN stainless steel under cyclic fatigue loading: Comparison with experimental results. Mater Sci Eng A 2017; 696:122-136.
  2. Buljac A, Shakoor M, Neggers J, Bernacki M, Bouchard P-, Helfen L, Morgeneyer T.F. Numerical validation framework for micromechanical simulations based on synchrotron 3D imaging. Comput Mech 2017; 59(3):419-441.
  3. Callahan M, Hubert O, Hild F, Perlade A, Schmitt J-H. Coincidence of strain-induced TRIP and propagative PLC bands in Medium Mn steels. Mater Sci Eng A 2017; 704:391-400.
  4. Carpiuc-Prisacari A, Poncelet M, Kazymyrenko K, Leclerc H, Hild F. A complex mixed-mode crack propagation test performed with a 6-axis testing machine and full-field measurements. Eng Fract Mech 2017; 176:1-22.
  5. Chamoin L, Pled F, Allier P-E, Ladevèze P. A posteriori error estimation and adaptive strategy for PGD model reduction applied to parametrized linear parabolic problems. Comput Methods Appl Mech Eng 2017; 327:118-146.
  6. Cheng L, Danas K, Constantinescu A, Kondo D. A homogenization model for porous ductile solids under cyclic loads comprising a matrix with isotropic and linear kinematic hardening. Int J Solids Struct 2017; 121:174-190.
  7. Corfdir A, Bonnet G. Strategies using boundary integral equations for solving exterior anisotropic conduction problems outside long cylinders. Eng Anal Boundary Elem 2017; 76:1-9.
  8. Corfdir A, Bonnet G. Degenerate scale for 2D Laplace equation with Robin boundary condition. Eng Anal Boundary Elem 2017;80:49-57.
  9. Dépinoy S, Marini B, Toffolon-Masclet C, Roch F, Gourgues-Lorenzon A-F. Austenite Grain Growth in a 2.25Cr-1Mo Vanadium-Free Steel Accounting for Zener Pinning and Solute Drag: Experimental Study and Modeling. Metall Mat Trans A Phys Metall Mat Sci 2017; 48(5):2289-2300.
  10. Dépinoy S, Toffolon-Masclet C, Urvoy S, Roubaud J, Marini B, Roch F, Kozeschnik E., Gourgues-Lorenzon A.-F. Carbide Precipitation in 2.25 Cr-1 Mo Bainitic Steel: Effect of Heating and Isothermal Tempering Conditions. Metall Mat Trans A Phys Metall Mat Sci 2017; 48(5):2164-2178.
  11. Dezecot S, Maurel V, Buffiere J-, Szmytka F, Koster A. 3D characterization and modeling of low cycle fatigue damage mechanisms at high temperature in a cast aluminum alloy. Acta Mater 2017; 123:24-34.
  12. Diani J, Gilormini P. Molecular mobility with respect to accessible volume in Monte Carlo lattice modl for polymers. Phys A Stat Mech Appl 2017; 468:825-831.
  13. Dormieux L, Lemarchand E, Kondo D, Brach S. Strength criterion of porous media: Application of homogenization techniques. J Rock Mech Geotech Eng 2017; 9(1):62-73.
  14. Duballet R, Baverel O, Dirrenberger J. Classification of building systems for concrete 3D printing. Autom Constr 2017; 83:247-258.
  15. Forest S, Sab K. Finite-deformation second-order micromorphic theory and its relations to strain and stress gradient models. Math Mech Solids 2017.
  16. Gu T, Medy J-R, Volpi F, Castelnau O, Forest S, Hervé-Luanco E, Lecouturier F., Proudhon H., Renault P-O., Thilly L. Multiscale modeling of the anisotropic electrical conductivity of architectured and nanostructured Cu-Nb composite wires and experimental comparison. Acta Mater 2017; 141:131-141.
  17. Gu T, Castelnau O, Forest S, Hervé-Luanco E, Lecouturier F, Proudhon H, Thilly L. Multiscale modeling of the elastic behavior of architectured and nanostructured Cu–Nb composite wires. Int J Solids Struct 2017; 121:148-162.
  18. Issanchou C, Bilbao S, Le Carrou J-, Touzé C, Doaré O. A modal-based approach to the nonlinear vibration of strings against a unilateral obstacle: Simulations and experiments in the pointwise case. J Sound Vib 2017; 393:229-251.
  19. Jailin C, Carpiuc A, Kazymyrenko K, Poncelet M, Leclerc H, Hild F, Roux S. Virtual hybrid test control of sinuous crack. J Mech Phys Solids 2017; 102:239-256.
  20. Kubin L, Sauzay M. Persistent slip bands: The bowing and passing model revisited. Acta Mater 2017; 132:517-524.
  21. Leguillon D, Li J, Martin E. Multi-cracking in brittle thin layers and coatings using a FFM model. Eur J Mech A Solids 2017; 63:14-21.
  22. Lestringant C, Maurini C, Lazarus A, Audoly B. Buckling of an Elastic Ridge: Competition between Wrinkles and Creases. Phys Rev Lett 2017; 118(16).
  23. Li T, Marigo J-J. Crack Tip Equation of Motion in Dynamic Gradient Damage Models. J Elast 2017; 127(1):25-57.
  24. Lu, X., Yvonnet, J., Detrez, F., and Bai, J. (2017). Multiscale modeling of nonlinear electric conductivity in graphenereinforced nanocomposites taking into account tunnelling effect. Journal of Computational Physics 337, 116–131. 
  25. Marigo J-J, Maurel A, Pham K, Sbitti A. Effective Dynamic Properties of a Row of Elastic Inclusions: The Case of Scalar Shear Waves. J Elast 2017; 128(2):265-289.
  26. Mazière M, Luis C, Marais A, Forest S, Gaspérini M. Experimental and numerical analysis of the Lüders phenomenon in simple shear. Int J Solids Struct 2017; 106-107:305-314.
  27. Olive M, Kolev B, Auffray N. A Minimal Integrity Basis for the Elasticity Tensor. Arch Ration Mech Anal 2017; 226(1).
  28. Nguyen TT, Yvonnet J, Bornert M, Chateau C, Bilteryst F, Steib E. Large-scale simulations of quasi-brittle microcracking in realistic highly heterogeneous microstructures obtained from micro CT imaging. Extrem Mech Lett 2017; 17:50-55.
  29. Pilvin P, Onimus F, Brenner R, Pascal S, Feaugas X, Saï K. Finite element assessment of an affine self–consistent model for hexagonal polycrystals. Eur J Mech A Solids 2017; 61:345-356.
  30. Rouzaud C, Gatuingt F, Hervé G, Dorival O. A new multi-frequency approach based on Padé approximants for the treatment of transient dynamics problems with the variational theory of complex rays. J Sound Vib 2017;392:170-186.
  31. Rovinelli A, Guilhem Y, Proudhon H, Lebensohn RA, Ludwig W, Sangid MD. Assessing reliability of fatigue indicator parameters for small crack growth via a probabilistic framework. Modell Simul Mater Sci Eng 2017; 25(4).
  32. Scalet G, Peigney M. A robust and efficient radial return algorithm based on incremental energy minimization for the 3D Souza-Auricchio model for shape memory alloys. Eur J Mech A Solids 2017; 61:364-382.
  33. Shakoor M, Buljac A, Neggers J, Hild F, Morgeneyer TF, Helfen L, Bernacki M., Bouchard P-O. On the choice of boundary conditions for micromechanical simulations based on 3D imaging. Int J Solids Struct 2017; 112:83-96.
  34. Svay A, Perron V, Imtiaz A, Zentner I, Cottereau R, Clouteau D, Bard P-Y., Hollender F., Lopez-Caballero F., Spatial coherency analysis of seismic ground motions from a rock site dense array implemented during the Kefalonia 2014 aftershock sequence. Earthqua Eng Struct Dyn 2017; 46(12):1895-1917.
  35. Wang Z-P, Poh LH, Dirrenberger J, Zhu Y, Forest S. Isogeometric shape optimization of smoothed petal auxetic structures via computational periodic homogenization. Comput Methods Appl Mech Eng 2017; 323:250-271.
  36. Weisz-Patrault D, Ehrlacher A. Imposed curvature of an elastic-plastic strip: Application to simulation of coils. Mec Ind 2017; 18(2).
  37. Xia L, Yvonnet J, Ghabezloo S. Phase field modeling of hydraulic fracturing with interfacial damage in highly heterogeneous fluid-saturated porous media. Eng Fract Mech 2017; 186:158-180. 
  38. Zhang FG, Bornert M, Petit J, Castelnau O. Accuracy of stress measurement by Laue microdiffraction (Laue-DIC method): The influence of image noise, calibration errors and spot number. J Synchrotron Radiat 2017; 24(4):802-817.


  1. Abdelmoula R, Debruyne G. Analysis of the stress and strain fields near the tip of a steady-state growing crack in an elastic-viscous medium: The Hui–Riedel problem revisited by means of the method of matched asymptotic expansions. C R Mec 2016; 344(9):613-622.
  2. Bignonnet F, Dormieux L, Kondo D. A micro-mechanical model for the plasticity of porous granular media and link with the Cam clay model. Int J Plast 2016; 79:259-274.
  3. Blivi AS, Benhui F, Bai J, Kondo D, Bédoui F. Experimental evidence of size effect in nano-reinforced polymers: Case of silica reinforced PMMA. Polym Test 2016; 56:337-343.
  4. Bollinger C, Raterron P, Castelnau O, Detrez F, Merkel S. Textures in deforming forsterite aggregates up to 8 GPa and 1673 K. Phys Chem Miner 2016; 43(6):409-417.
  5. Buljac A, Taillandier-Thomas T, Morgeneyer TF, Helfen L, Roux S, Hild F. Slant strained band development during flat to slant crack transition in AA 2198 T8 sheet: in situ 3D measurements. Int J Fract 2016; 200(1-2):49-62.
  6. Caruel M, Truskinovsky L. Statistical mechanics of the Huxley-Simmons model. Phys Rev E 2016; 93(6).
  7. Charbal A, Dufour JE, Hild F, Poncelet M, Vincent L, Roux S. Hybrid Stereocorrelation Using Infrared and Visible Light Cameras. Exp Mech 2016; 56(5):845-860.
  8. Charbal A, Dufour J-, Guery A, Hild F, Roux S, Vincent L, Poncelet M. Integrated Digital Image Correlation considering gray level and blur variations: Application to distortion measurements of IR camera. Opt Lasers Eng 2016; 78:75-85.
  9. Cinquin J, Colin X, Fayolle B, Mille M, Terekhina S, Chocinski-Arnault L, et al. Thermo-oxidation behaviour of organic matrix composite materials at high temperatures. Adv Aircr Spacecr Sci 2016; 3(2):171-195. 
  10.  Chosson R, Gourgues-Lorenzon AF, Vandenberghe V, Brachet JC, Crépin J. Creep flow and fracture behavior of the oxygen-enriched alpha phase in zirconium alloys. Scripta Mater 2016; 117:20-23.
  11. Corfdir A, Bonnet G. Exact degenerate scales in plane elasticity using complex variable methods. Int J Solids Struct 2016; 80:430-444.
  12. Desmorat B, Desmorat R. Second order tensorial framework for 2D medium with open and closed cracks. Eur J Mech A Solids 2016; 58:262-277.
  13. Desmorat R, Desmorat B. 3D extension of Tensorial Polar Decomposition: 2Application to (photo-)elasticity tensors. C R Mec 2016; 344(6):402-417.
  14. De Rancourt V, Ammar K, Appolaire B, Forest S. Homogenization of viscoplastic constitutive laws within a phase field approach. J Mech Phys Solids 2016; 88:291-319.
  15. Hild F, Bouterf A, Chamoin L, Leclerc H, Mathieu F, Neggers J, Pled F., Tomicevic Z., Roux S.,Toward 4D mechanical correlation. Adv Model Simul Eng Sci 2016; 3(1). Article number 17 .
  16. Honorio T, Bary B, Benboudjema F. Multiscale estimation of ageing viscoelastic properties of cement-based materials: A combined analytical and numerical approach to estimate the behaviour at early age. Cem Concr Res 2016; 85:137-155.
  17. Houanoh K, Yin H-P, Cesbron J, He Q-C. Influence of the in-plan distribution of asperities on the normal contact of periodically rough surfaces. Proc Inst Mech Eng Part C J Mech Eng Sci 2016; 230(9):1382-1391.
  18. Houanoh K, Yin H-P, He Q-C. A simple numerical approach for solving the frictionless contact problem of elastic wavy surfaces. Meccanica 2016; 51(2):463-473.
  19. Humbert T, Josserand C, Touzé C, Cadot O. Phenomenological model for predicting stationary and non-stationary spectra of wave turbulence in vibrating plates. Phys D Nonlinear Phenom 2016; 316:34-42.
  20. Kubin L, Sauzay M. Persistent slip bands: Similitude and its consequences. Acta Mater 2016; 104:295-302.
  21. Li T, Marigo J-J, Guilbaud D, Potapov S. Gradient damage modeling of brittle fracture in an explicit dynamics context. Int J Numer Methods Eng 2016; 108(11):1381-1405.
  22. Li T, Marigo J-J, Guilbaud D, Potapov S. Numerical investigation of dynamic brittle fracture via gradient damage models. Adv Model Simul Eng Sci 2016; 3(1).
  23. Ling C, Besson J, Forest S, Tanguy B, Latourte F, Bosso E. An elastoviscoplastic model for porous single crystals at finite strains and its assessment based on unit cell simulations. Int J Plast 2016; 84:58-87.
  24. Marigo J-J, Maurini C, Pham K. An overview of the modelling of fracture by gradient damage models. Meccanica 2016; 51(12):3107-3128.
  25. Morgeneyer TF, Taillandier-Thomas T, Buljac A, Helfen L, Hild F. On strain and damage interactions during tearing: 3D in situ measurements and simulations for a ductile alloy (AA2139-T3). J Mech Phys Solids 2016; 96:550-571.
  26. Néron D, Dhia HB, Cottereau R. A decoupled strategy to solve reduced-order multimodel problems in the PGD and Arlequin frameworks. Comput Mech 2016; 57(4):509-521.
  27. Nguyen M-T, Allain J-M, Gharbi H, Desceliers C, Soize C. Experimental multiscale measurements for the mechanical identification of a cortical bone by digital image correlation. J Mech Behav Biomed Mater 2016; 63:125-133.
  28. Nguyen TT, Yvonnet J, Zhu Q-C, Bornert M, Chateau C. A phase-field method for computational modeling of interfacial damage interacting with crack propagation in realistic microstructures obtained by microtomography. Comput Methods Appl Mech Eng 2016; 312:567-595.
  29. Nguyen TT, Yvonnet J, Bornert M, Chateau C. Initiation and propagation of complex 3D networks of cracks in heterogeneous quasi-brittle materials: Direct comparison between in situ testing-microCT experiments and phase field simulations. J Mech Phys Solids 2016; 95:320-350.
  30. Nguyen TT, Yvonnet J, Bornert M, Chateau C, Sab K, Romani R, Le Roy R. On the choice of parameters in the phase field method for simulating crack initiation with experimental validation. Int J Fract 2016; 197(2):213-226.
  31. Pensée V, Morin L, Kondo D. A damage model for ductile porous materials with a spherically anisotropic matrix. Int J Damage Mech 2016; 25(3):315-335.
  32. Perdigou C, Audoly B. The viscous curtain: General formulation and finite-element solution for the stability of flowing viscous sheets. J Mech Phys Solids 2016; 96:291-311.
  33. Pham TH, Laverne J, Marigo J-J. Stress gradient effects on the nucleation and propagation of cohesive cracks. Discrete Contin Dyn Syst Ser S 2016; 9(2):557-584.
  34. Plancher E, Petit J, Maurice C, Favier V, Saintoyant L, Loisnard D, et al. On the Accuracy of Elastic Strain Field Measurements by Laue Microdiffraction and High-Resolution EBSD: a Cross-Validation Experiment. Exp Mech 2016; 56(3):483-492.
  35. Pouzet S, Peyre P, Gorny C, Castelnau O, Baudin T, Brisset F, Colin C., Gadaud P. Additive layer manufacturing of titanium matrix composites using the direct metal deposition laser process. Mater Sci Eng A 2016; 677:171-181.
  36. Rapti I, Modaressi-Farahmand-Razavi A, Foucault A, Lopez-Caballero F, Voldoire F. Coupled S-P wave propagation in nonlinear regularized micromorphic media. Comput Geotech 2016; 77:106-114.
  37. Sab K, Legoll F, Forest S. Stress Gradient Elasticity Theory: Existence and Uniqueness of Solution. J Elast 2016; 123(2):179-201.
  38. Tapie L, Chiche N, Boitelle P, Morenton P, Attal J-P, Schmitt N, Vennat E. Adaptation Measurement of CAD/CAM Dental Crowns with X-Ray Micro-CT: Metrological Chain Standardization and 3D Gap Size Distribution. Adv Mater Sci Eng 2016; 2016.
  39. Tran V-P, Guilleminot J, Brisard S, Sab K. Stochastic modeling of mesoscopic elasticity random field. Mech Mater 2016; 93:1-12.
  40. Viganò N, Tanguy A, Hallais S, Dimanov A, Bornert M, Batenburg KJ, et al. Three-dimensional full-field X-ray orientation microscopy. Sci Rep 2016; 6.


  1. Adam C, Bouabdallah S, Zarroug M, Maitournam H. Stable time step estimates for NURBS-based explicit dynamics. Comput Methods Appl Mech Eng 2015; 295:581-605.
  2. Alessi R, Marigo J-J, Vidoli S. Gradient damage models coupled with plasticity: Variational formulation and main properties. Mech Mater 2015; 80(PB):351-367.
  3. Auffray N, Dirrenberger J, Rosi G. A complete description of bi-dimensional anisotropic strain-gradient elasticity. Int J Solids Struct 2015; -70:195-206.
  4. Bernachy-Barbe F, Gélébart L, Bornert M, Crépin J, Sauder C. Characterization of SiC/SiC composites damage mechanisms using Digital Image Correlation at the tow scale. Compos Part A Appl Sci Manuf 2015; 68:101-109.
  5. Bernachy-Barbe F, Gélébart L, Bornert M, Crépin J, Sauder C. Anisotropic damage behavior of SiC/SiC composite tubes: Multiaxial testing and damage characterization. Compos Part A Appl Sci Manuf 2015; 76:281-288. 
  6. Bottoni M, Dufour F, Giry C. Topological search of the crack pattern from a continuum mechanical computation. Eng Struct 2015; 99:346-359.
  7. Cailletaud G, Quilici S, Azzouz F, Chaboche J-L. A dangerous use of the fading memory term for non linear kinematic models at variable temperature. Eur J Mech A Solids 2015; 54:24-29.
  8. Caruel M, Allain J-M, Truskinovsky L. Mechanics of collective unfolding. J Mech 2Phys Solids 2015; 76:237-259.
  9. Cao T-S, Mazière M, Danas K, Besson J. A model for ductile damage prediction at low stress triaxialities incorporating void shape change and void rotation. Int J Solids Struct 2015; 63:240-263.
  10. Cattabiani A, Barbarulo A, Riou H, Ladevèze P. Variational theory of complex rays applied to shell structures: in-plane inertia, quasi-symmetric ray distribution, and orthotropic materials. Comput Mech 2015; 56(6):983-997.
  11. Chateau C, Gélébart L, Bornert M, Crépin J. Micromechanical modeling of the elastic behavior of unidirectional CVI SiC/SiC composites. Int J Solids Struct 2015; 58:322-334.
  12. Cheng L, Monchiet V, Morin L, de Saxcé G, Kondo D. An analytical Lode angle dependent damage model for ductile porous materials. Eng Fract Mech 2015; 149:119-133.
  13. Combescure, C., Dumontet, H., and Voldoire, F. Dissipative Homogenised Reinforced Concrete (DHRC) constitutive model dedicated to reinforced concrete plates under seismic loading. Int. J. Solid. Struct., 2015, 73–74, 78–98.
  14. Corfdir A, Bonnet G. Variational Formulation and Upper Bounds for Degenerate Scales in Plane Elasticity. J Elast 2014;118(2):207-221.
  15. De Jaeger J, Solas D, Fandeur O, Schmitt J-H, Rey C. 3D numerical modeling of dynamic recrystallization under hot working: Application to Inconel 718. Mater Sci Eng A 2015; 646:33-44.
  16. Desmorat B, Desmorat R. Tensorial Polar Decomposition of 2D fourth-order tensors. C R Mec 2015; 343(9):471-475. https://doi.org/10.1016/j.crme.2015.07.002
  17. Detrez F, Castelnau O, Cordier P, Merkel S, Raterron P. Effective viscoplastic behavior of polycrystalline aggregates lacking four independent slip systems inferred from homogenization methods; application to olivine. J Mech Phys Solids 2015; 83:199-220.
  18. Dormieux L, Kondo D. Exact solutions for an elastic damageable hollow sphere subjected to isotropic mechanical loadings. Int J Mech Sci 2015; 90:25-32.
  19. Drissi S, Eddhahak A, Caré S, Neji J. Thermal analysis by DSC of Phase Change Materials, study of the damage effect. J Build Eng 2015; 1:13-19. 
  20. Eddhahak A, Vandamme M, Vu VT. Micromechanical contribution for the prediction of the viscoelastic properties of high rate recycled asphalt and influence of the level blending. Arch Civ Mech Eng 2015; 15(4):1037-1045.
  21. Faurie D, Djemia P, Castelnau O, Brenner R, Belliard L, Le Bourhis E, et al. Peculiar effective elastic anisotropy of nanometric multilayers studied by surface Brillouin scattering. Superlattices Microstruct 2015; 88:551-560.
  22. Feld-Payet S, Chiaruttini V, Besson J, Feyel F. A new marching ridges algorithm for crack path tracking in regularized media. Int J Solids Struct 2015; 71:57-69.
  23. Gaubert A, Jouiad M, Cormier J, Le Bouar Y, Ghighi J. Three-dimensional imaging and phase-field simulations of the microstructure evolution during creep tests of 〈011〉-oriented Ni-based superalloys. Acta Mater 2015; 84:237-255.
  24. Gosselet P, Rixen D, Roux F-, Spillane N. Simultaneous FETI and block FETI: Robust domain decomposition with multiple search directions. Int J Numer Methods Eng 2015;104(10):905-927.
  25. Gu T, Herve-Luanco E, Proudhon H, Thilly L, Dubois J-, Lecouturier F, et al. Multiscale modeling of the electrical behavior of Cu-Nb nano-composites. Mater Tech 2015; 103(3).
  26. Iltchev A, Marcadon V, Kruch S, Forest S. Computational homogenisation of periodic cellular materials: Application to structural modelling. Int J Mech Sci 2015; 93:240-255.
  27. Le Jolu T, Morgeneyer TF, Denquin A, Gourgues-Lorenzon AF. Fatigue lifetime and tearing resistance of AA2198 Al-Cu-Li alloy friction stir welds: Effect of defects. Int J Fatigue 2015; 70:463-472.
  28. Lemarchand E, Dormieux L, Kondo D. Lode’s angle effect on the definition of the strength criterion of porous media. Int J Numer Anal Methods Geomech 2015; 39(14):1506-1526.
  29. León Baldelli AA, Maurini C, Pham K. A gradient approach for the macroscopic modeling of superelasticity in softening shape memory alloys. Int J Solids Struct 2015; 52:45-55.
  30. Le Saux M, Besson J, Carassou S. A model to describe the mechanical behavior and the ductile failure of hydrided Zircaloy-4 fuel claddings between 25°C and 480°C. J Nucl Mater 2015; 466:43-55.
  31. Michou A, Hilaire A, Benboudjema F, Nahas G, Wyniecki P, Berthaud Y. Reinforcement-concrete bond behavior: Experimentation in drying conditions and meso-scale modeling. Eng Struct 2015; 101:570-582.
  32. Monteil M, Thomas O, Touzé C. Identification of mode couplings in nonlinear vibrations of the steelpan. Appl Acoust 2015; 89:1-15.
  33. Nguyen MT, Desceliers C, Soize C, Allain JM, Gharbi H. Multiscale identification of the random elasticity field at mesoscale of a heterogeneous microstructure using multiscale experimental observations. Int J Multiscale Comput Eng 2015; 13(4):281-295.
  34. Nguyen TT, Yvonnet J, Zhu Q-Z, Bornert M, Chateau C. A phase field method to simulate crack nucleation and propagation in strongly heterogeneous materials from direct imaging of their microstructure. Eng Fract Mech 2015; 139:18-39.
  35. Nguyen TT, Yvonnet J, Zhu Q-Z, Bornert M, Chateau C. A phase-field method for computational modeling of interfacial damage interacting with crack propagation in realistic microstructures obtained by microtomography. Comput Methods Appl Mech Eng 2016;312:567-595.
  36. Ovarlez G, Mahaut F, Deboeuf S, Lenoir N, Hormozi S, Chateau X. Flows of suspensions of particles in yield stress fluids. J Rheol 2015; 59(6):1449-1486.
  37. Pallares G, George M, Ponson L, Chapuliot S, Roux S, Ciccotti M. Multiscale investigation of stress-corrosion crack propagation mechanisms in oxide glasses. Corros Rev 2015; 33(6):501-514.
  38. Petit J, Castelnau O, Bornert M, Zhang FG, Hofmann F, Korsunsky AM, et al.
  39. . J Synchrotron Radiat 2015; 22:980-994.
  40. Perrin G, Duhamel D, Soize C, Funfschilling C. Quantification of the influence of the track geometry variability on the train dynamics. Mech Syst Signal Process 2015; 60:945-957.
  41. Ranc N, Blanche A, Ryckelynck D, Chrysochoos A. POD Preprocessing of IR Thermal Data to Assess Heat Source Distributions. Exp Mech 2015; 55(4):725-739.
  42. Romani R, Bornert M, Leguillon D, Roy RL, Sab K. Detection of crack onset in double cleavage drilled specimens of plaster under compression by digital image correlation – Theoretical predictions based on a coupled criterion. Eur J Mech A Solids 2015; 51:172-182.
  43.  Shi XJ, Dupuy L, Devincre B, Terentyev D, Vincent L. Interaction of 〈1 0 0〉 dislocation loops with dislocations studied by dislocation dynamics in α-iron. J Nucl Mater 2015; 460:37-43.
  44. Taheri S, Vincent L, Le-Roux J-. Classification of metallic alloys for fatigue damage accumulation: A conservative model under strain control for 304 stainless steels. Int J Fatigue 2015; 70:73-84.
  45. Thibeaux R, Perrin E, Smaniotto B, Duval H, Vennat E, Neron D, David B. Using X-ray computed tomography for quantification of cell proliferation within a perfusion bioreactor. Comput Methods Biomech Biomed Eng 2015; 18:2072-2073.
  46. Villani A, Busso EP, Forest S. Field theory and diffusion creep predictions in polycrystalline aggregates. Modell Simul Mater Sci Eng 2015; 23(5). http://dx.doi.org/10.1088/0965-0393/23/5/055006
  47. Vu MN, Geniaut S, Massin P, Marigo JJ. Numerical investigation on corner singularities in cracked plates using the G-theta method with an adapted θ field. Theor Appl Fract Mech 2015; 77:59-68.
  48. Wang LL, Bornert M, Héripré E, Chanchole S, Pouya A, Halphen B. The Mechanisms of Deformation and Damage of Mudstones: A Micro-scale Study Combining ESEM and DIC. Rock Mech Rock Eng 2015; 48(5):1913-1926.
  49. Wang LL, Bornert M, Yang DS, Héripré E, Chanchole S, Halphen B, Pouya A., Caldemaison D. Microstructural insight into the nonlinear swelling of argillaceous rocks. Eng Geol 2015; 193:435-444.
  50. Wang L, Bornert M, Héripré E, Chanchole S, Pouya A, Halphen B. Microscale insight into the influence of humidity on the mechanical behavior of mudstones. J Geophys Res Solid Earth 2015; 120(5):3173-3186.
  51. Wang W, Roubier N, Puel G, Allain J-M, Infante IC, Attal J-P, Vennat E. A new method combining finite element analysis and digital image correlation to assess macroscopic mechanical properties of dentin. Mater 2015; 8(2):535-550.
  52. Wolinne G, Harnisch C, Héripré E, Ruch S, Salito A, Jeandin M, Corté L. Mechanical Study of Novel VPS-Titanium Coating on Polyethylene Substrates. J Therm Spray Technol 2014; 24(1-2):206-214.
  53. Zhang F.G, Castelnau O, Bornert M, Petit J, Marijon JB, Plancher E. Determination of deviatoric elastic strain and lattice orientation by applying digital image correlation to Laue microdiffraction images: The enhanced Laue-DIC method. J Appl Crystallog 2015; 48:1805-1817.


  1. Abdelmoula R, Debruyne G. Modal analysis of the dynamic crack growth and arrest in a DCB specimen. Int J Fract 2014; 188(2):187-202.
  2. Alayli N, Schoenstein F, Girard A, Tan KL, Dahoo PR. Spark Plasma Sintering 8constrained process parameters of sintered silver paste for connection in power electronic modules: Microstructure, mechanical and thermal properties. Mater Chem Phys 2014; 148(1-2):125-133.
  3. Ammar K, Appolaire B, Forest S, Cottura M, Bouar YL, Finel A. Modelling inheritance of plastic deformation during migration of phase boundaries using a phase field method. Meccanica 2014; 49(11):2699-2717.
  4. Baydoun I, Savin É, Cottereau R, Clouteau D, Guilleminot J. Kinetic modeling of multiple scattering of elastic waves in heterogeneous anisotropic media. Wave Mot 2014; 51(8):1325-1348.
  5. Benoit A, Rémy L, Köster A, Maitournam H, Oger F. Experimental investigation of the behavior and the low cycle fatigue life of a welded structure. Mater Sci Eng A 2014; 595:64-76.
  6. Bonnet G, Corfdir A, Nguyen MT. On the solution of exterior plane problems by the boundary element method: A physical point of view. Eng Anal Boundary Elem 2014; 38:40-48.
  7. Bourdin B, Marigo J-, Maurini C, Sicsic P. Morphogenesis and propagation of complex cracks induced by thermal shocks. Phys Rev Lett 2014; 112(1).
  8. Blanc F, François V, Fabre B, De La Cuadra P, Lagrée P-. Modeling the receptivity of an air jet to transverse acoustic disturbance with application to musical instruments. J Acoust Soc Am 2014; 135(6):3221-3230.
  9. Chateau C, Gélébart L, Bornert M, Crépin J, Caldemaison D, Sauder C. Modeling of damage in unidirectional ceramic matrix composites and multi-scale experimental validation on third generation SiC/SiC minicomposites. J Mech Phys Solids 2014; 63(1):298-319.
  10. Chouman M, Gaubert A, Chaboche JL, Kanouté P, Cailletaud G, Quilici S. Elastic-viscoplastic notch correction methods. Int J Solids Struct 2014; 51(18):3025-3041.
  11. Corfdir A, Bonnet G. Variational Formulation and Upper Bounds for Degenerate Scales in Plane Elasticity. J Elast 2014;118(2):207-221.
  12. Dirrenberger J, Forest S, Jeulin D. Towards gigantic RVE sizes for 3D stochastic fibrous networks. Int J Solids Struct 2014; 51(2):359-376.
  13. DIVARET L., MOUSSOU P., BERLAND J., BERRO H., CADOT O., et al., Forced exerted on a cyclinder in near axial flow, Journal of pressure vessel technology, 2014 , 136, 051306
  14. Divaret L, Cadot O, Moussou P, Doaré O. Normal forces exerted upon a long cylinder oscillating in an axial flow. J Fluid Mech 2014;752:649-669.
  15. Esnault JB, Doquet V, Massin P. A three-dimensional analysis of fatigue crack paths in thin metallic sheets. Int J Fatigue 2014;62:119-132.
  16. Fagiano C, Genet M, Baranger E, Ladevèze P. Computational geometrical and mechanical modeling of woven ceramic composites at the mesoscale. Compos Struct 2014; 112(1):146-156.
  17. Fuster D, Pham K, Zaleski S. Stability of bubbly liquids and its connection to the process of cavitation inception. Phys Fluids 2014; 26(4).
  18. Geers MGD, Cottura M, Appolaire B, Busso EP, Forest S, Villani A. Coupled glide-climb diffusion-enhanced crystal plasticity. J Mech Phys Solids 2014; 70(1):136-153.
  19. Guinard C, Montay G, Guipont V, Jeandin M, Girardot J, Schneider M. Residual Stress Analysis of Laser-Drilled Thermal Barrier Coatings Involving Various Bond Coats. J Therm Spray Technol 2014; 24(1-2):252-262.
  20. Gumuchian D, Cavadias S, Duten X, Tatoulian M, Da Costa P, Ognier S. Organic pollutants oxidation by needle/plate plasma discharge: On the influence of the gas nature. Chem Eng Process : Process Intensif 2014; 82:185-192.
  21. Hellouin de Menibus A, Auzoux Q, Mongabure P, Macdonald V, Le Jolu T, Besson J, et al. Fracture of Zircaloy-4 cladding tubes with or without hydride blisters in uniaxial to plane strain conditions with standard and optimized expansion due to compression tests. Mater Sci Eng A 2014; 604:57-66.
  22. Hellouin De Menibus A, Auzoux Q, Dieye O, Berger P, Bosonnet S, Foy E, et al. Formation and characterization of hydride blisters in Zircaloy-4 cladding tubes. J Nucl Mater 2014; 449(1-3):132-147.
  23. Jehel P, Léger P, Ibrahimbegovic A. Initial versus tangent stiffness-based Rayleigh damping in inelastic time history seismic analyses. Earthqua Eng Struct Dyn 2014; 43(3):467-484.
  24. Jus Y, Longatte E, Chassaing J-, Sagaut P. Low mass-damping vortex-induced vibrations of a single cylinder at moderate reynolds number. J Pressure Vessel Technol Trans ASME 2014; 136(5). https://10.1115/1.4027659
  25. Lanoye E, Dormieux L, Kondo D. A micromechanical-based damage analysis of a cylindrical bar under torsion: Theoretical results, Finite Elements verification and application. Theor Appl Fract Mech 2014; 74(1):116-125.
  26. Lefebvre S, Devincre B, Aubert P, Hoc T. Size effect on the mechanical behaviour of polycrystalline copper microbeams. Philos Mag 2014; 94(21):2472-2485.
  27. Le Guennec Y, Cottereau R, Clouteau D, Soize C. A coupling method for stochastic continuum models at different scales. Probab Eng Mech 2014; 37:138-147.
  28. Le Jolu T, Morgeneyer TF, Denquin A, Sennour M, Laurent A, Besson J, et al. Microstructural Characterization of Internal Welding Defects and Their Effect on the Tensile Behavior of FSW Joints of AA2198 Al-Cu-Li Alloy. Metall Mat Trans A Phys Metall Mat Sci 2014; 45(12):5531-5544.
  29. Li J, Proudhon H, Roos A, Chiaruttini V, Forest S. Crystal plasticity finite element simulation of crack growth in single crystals. Comput Mater Sci 2014; 94(C):191-197.
  30. Luo Y.M., Chevalier L., Monteiro E., Basis for viscoelastic modelling of polyethylene terephthalate (PET) near Tg with parameter identification from multi-axial elongation experiments, International journal of material forming, 2014, 7, 359-367
  31. Maurel V, Busso EP, Frachon J, Besson J, N’Guyen F. A methodology to model the complex morphology of rough interfaces. Int J Solids Struct 2014; 51(19-20):3293-3302.
  32. Monchiet V, Charkaluk E, Kondo D. Macroscopic yield criteria for ductile materials containing spheroidal voids: An Eshelby-like velocity fields approach. Mech Mater 2014; 72:1-18.
  33. Morgeneyer TF, Taillandier-Thomas T, Helfen L, Baumbach T, Sinclair I, Roux S, et al. In situ 3-D observation of early strain localization during failure of thin Al alloy (2198) sheet. Acta Mater 2014; 69:78-91.
  34. Monteil M, Touzé C, Thomas O, Benacchio S. Nonlinear forced vibrations of thin structures with tuned eigenfrequencies: The cases of 1:2:4 and 1:2:2 internal resonances. Nonlinear Dyn 2014;75(1-2): 175-200.
  35. Neukirch S, Antkowiak A, Marigo J-. Soft beams: When capillarity induces axial compression. Phys Rev E Stat Nonlinear Soft Matter Phys 2014; 89(1).
  36. Perrin G., Soize C., Duhamel D., Funfschilling C., A posteriori error and optimal reduced basis for stochastic processed defined by a finite set of realizations, SIAM/ASA Journal of uncertainty quantification, 2014, 2, p. 745-762
  37. Shen W, He Z, Dormieux L, Kondo D. Effective strength of saturated double porous media with a Drucker-Prager solid phase. Int J Numer Anal Methods Geomech 2014; 38(3):281-296.
  38. Shen W, Lanoye E, Dormieux L, Kondo D. Homogenization of saturated double porous media with Eshelby-like velocity field. Acta Geophys 2014; 62(5):1146-1162.
  39. Sicsic P, Marigo J-, Maurini C. Initiation of a periodic array of cracks in the thermal shock problem: A gradient damage modeling. J Mech Phys Solids 2014; 63(1):256-284.
  40. Taillandier-Thomas T, Roux S, Morgeneyer TF, Hild F. Localized strain field measurement on laminography data with mechanical regularization. Nucl Instrum Methods Phys Res Sect B 2014; 324:70-79.
  41. Villani A, Busso EP, Ammar K, Forest S, Geers MGD. A fully coupled diffusional-mechanical formulation: numerical implementation, analytical validation, and effects of plasticity on equilibrium. Arch Appl Mech 2014; 84(9-11):1647-1664.
  42. Wang LL, Pouya A, Bornert M, Halphen B. Modelling the internal stress field in argillaceous rocks under humidification/desiccation. Int J Numer Anal Methods Geomech 2014; 38(16):1664-1682.
  43. Wang LL, Bornert M, Héripré E, Chanchole S, Tanguy A. Full-field measurements on low-strained geomaterials using environmental scanning electron microscopy and digital image correlation: Improved imaging conditions. Strain 2014; 50(5):370-380.
  44. Wang L, Bornert M, Chanchole S, Héripré E, Yang D. Micromechanical experimental investigation of mudstones. Proc Inst Civ Eng Struct Build 2014; 4:306-309.
  45. Wang LL, Bornert M, Héripré E, Yang DS, Chanchole S. Irreversible deformation and damage in argillaceous rocks induced by wetting/drying. J Appl Geophys 2014; 107:108-118.
  46. Wolinne G, Harnisch C, Héripré E, Ruch S, Salito A, Jeandin M, et al. Mechanical Study of Novel VPS-Titanium Coating on Polyethylene Substrates. J Therm Spray Technol 2014; 24(1-2):206-214.


  1. Age K., Boutillon X., Rebillat M., Vibroacoustics of the piano soundboard : (Non)linearity and modal properties in the low- and mid-frequency ranges, Journal of sound and vibration, 2013; 332 : 1288-1305
  2. Auffray N, Bonnet M, Pagano S. Identification of transient heat sources using the reciprocity gap. Inverse Probl Sci Eng 2013;  21(4):721-738.
  3. Afgan I, Benhamadouche S, Han X, Sagaut P, Laurence D. Flow over a flat plate with uniform inlet and incident coherent gusts. J Fluid Mech 2013;  720:457-485.
  4. Ayhan B, Jehel P, Brancherie D, Ibrahimbegovic A. Coupled damage-plasticity model for cyclic loading: Theoretical formulation and numerical implementation. Eng Struct 2013;  50:30-42.
  5. Basseville S, Proudhon H, Héripŕe E, Cailletaud G. Numerical study of the parameters affecting fretting wear profiles. Mater Tech 2013;  101(2).
  6. Benmhenni N, Bouvier S, Brenner R, Chauveau T, Bacroix B. Micromechanical modelling of monotonic loading of CP α-Ti: Correlation between macroscopic and microscopic behaviour. Mater Sci Eng A 2013;  573:222-233.
  7. Bourcier M, Bornert M, Dimanov A, Héripré E, Raphanel JL. Multiscale experimental investigation of crystal plasticity and grain boundary sliding in synthetic halite using digital image correlation. J Geophys Res B Solid Earth 2013;  118(2):511-526.
  8. Carrier B, Wang L, Vandamme M, Pellenq RJ-, Bornert M, Tanguy A, et al. ESEM study of the humidity-induced swelling of clay film. Langmuir 2013;  29(41):12823-12833.
  9. Corfdir A, Bonnet G. Degenerate scale for the Laplace problem in the half-plane;  Approximate logarithmic capacity for two distant boundaries. Eng Anal Boundary Elem 2013;  37(5):836-841.
  10. Djaziri S, Faurie D, Le Bourhis E, Goudeau P, Renault P-, Mocuta C, et al. Deformation modes of nanostructured thin film under controlled biaxial deformation. Thin Solid Films 2013;  530:30-34.
  11. Dormieux L, Kondo D. Non linear homogenization approach of strength of nanoporous materials with interface effects. Int J Eng Sci 2013;  71:102-110.
  12. Doumenc F, Chénier E, Trouette B, Boeck T, Delcarte C, Guerrier B, et al. Free convection in drying binary mixtures: Solutal versus thermal instabilities. Int J Heat Mass Transf 2013;  63:336-350.
  13. Ege K, Boutillon X, Rébillat M. Vibroacoustics of the piano soundboard: (Non)linearity and modal properties in the low- and mid-frequency ranges. J Sound Vib 2013;  332(5):1288-1305.
  14. Fritzen F, Forest S, Kondo D, Böhlke T. Computational homogenization of porous materials of Green type. Comput Mech 2013;  52(1):121-134.
  15. Gérard C, Cailletaud G, Bacroix B. Modeling of latent hardening produced by complex loading paths in FCC alloys. Int J Plast 2013; 42:194-212.
  16. Guillemer C, Clavel M, Cailletaud G. A model for slip and twinning for extruded magnesium under cyclic loading. Rev Metall 2013; 109(6):423-426.
  17. Hattab M, Hammad T, Fleureau J-M, Hicher P-Y. Behaviour of a sensitive marine sediment: Microstructural investigation. Geotechnique 2013;63(1):71-84.
  18. Hollner S, Piozin E, Mayr P, Caës C, Tournié I, Pineau A, et al. Characterization of a boron alloyed 9Cr3W3CoVNbBN steel and further improvement of its high-temperature mechanical properties by thermomechanical treatments. J Nucl Mater 2013; 441(1-3):15-23.
  19. He Z, Caratini G, Dormieux L, Kondo D. Homogenization of anisotropic elastoplastic behaviors of a porous polycrystal with interface effects. Int J Numer Anal Methods Geomech 2013; 37(18):3213-3236.
  20. He Z, Dormieux L, Lemarchand E, Kondo D. Cohesive Mohr-Coulomb interface effects on the strength criterion of materials with granular-based microstructure. Eur J Mech A Solids 2013; 42:430-440.
  21. He Z, Dormieux L, Kondo D. Strength properties of a Drucker-Prager porous medium reinforced by rigid particles. Int J Plast 2013; 51:218-240.
  22. Hellouin De Menibus A, Guilbert T, Auzoux Q, Toffolon C, Brachet J-C, Bechade J-L. Hydrogen contribution to the thermal expansion of hydrided Zircaloy-4 cladding tubes. J Nucl Mater 2013; 440(1-3):169-177.
  23. Humbert T, Cadot O, Düring G, Josserand C, Rica S, Touzé C. Wave turbulence in vibrating plates: The effect of damping. EPL 2013; 102(3).
  24. Jason L, Torre-Casanova A, Davenne L, Pinelli X. Cracking behavior of reinforced concrete beams: Experiment and simulations on the numerical influence of the steel-concrete bond. Int J Fract 2013; 180(2):243-260.
  25. Lavergne F, Brenner R, Sab K. Effects of grain size distribution and stress heterogeneity on yield stress of polycrystals: A numerical approach. Comput Mater Sci 2013; 77:387-398.
  26. Laudarin F, Desceliers C, Bonnet G, Argoul P. A non-parametric probabilistic model for soil-structure interaction. Comput Mech 2013; 52(1):53-64.
  27. León Baldelli AA, Bourdin B, Marigo J-J, Maurini C. Fracture and debonding of a thin film on a stiff substrate: Analytical and numerical solutions of a one-dimensional variational model. Continuum Mech Thermodyn 2013; 25(2-4):243-268.
  28. Luo Y-, Chevalier L, Utheza F, Monteiro E. Numerical simulation of the thermodependant viscohyperelastic behavior of polyethylene terephthalate near the glass transition temperature: Prediction of the self-heating during biaxial tension test. Polym Eng Sci 2013; 53(12):2683-2695.
  29. Marcadon V, Brown D, Hervé E, Mélé P, Albérola ND, Zaoui A. Confrontation between Molecular Dynamics and micromechanical approaches to investigate particle size effects on the mechanical behaviour of polymer nanocomposites. Comput Mater Sci 2013; 79:495-505.
  30. Martin G, Caldemaison D, Bornert M, Pinna C, Bréchet Y, Véron M, et al. Characterization of the High Temperature Strain Partitioning in Duplex Exp Mech 2013; 53(2):205-215.
  31. Merhy E, Rémy L, Maitournam H, Augustins L. Crack growth characterisation of A356-T7 aluminum alloy under thermo-mechanical fatigue loading. Eng Fract Mech 2013; 110:99-112.
  32. Monchiet V, Kondo D. Combined voids size and shape effects on the macroscopic criterion of ductile nanoporous materials. Int J Plast 2013; 43:20-41.
  33. Monnet G, Vincent L, Devincre B. Dislocation-dynamics based crystal plasticity law for the low- and high-temperature deformation regimes of bcc crystal. Acta Mater 2013; 61(16):6178-6190.
  34. Moradi A, Leguillon D, Carrère N. Influence of the adhesive thickness on a debonding – An asymptotic model. Eng Fract Mech 2013; 114:55-68.
  35. Moradi A, Carrère N, Leguillon D, Martin E, Cognard J-. Strength prediction of bonded assemblies using a coupled criterion under elastic assumptions: Effect of material and geometrical parameters. Int J Adhes Adhes 2013; 47:73-82.
  36. Morgeneyer TF, Helfen L, Mubarak H, Hild F. 3D Digital Volume Correlation of Synchrotron Radiation Laminography Images of Ductile Crack Initiation: An Initial Feasibility Study. Exp Mech 2013; 53(4):543-556.
  37. Neukirch S, Antkowiak A, Marigo J-J. The bending of an elastic beam by a liquid drop: A variational approach. Proc R Soc A Math Phys Eng Sci 2013; 469(2157).
  38. Perrin G, Soize C, Duhamel D, Funfschilling C. Track irregularities stochastic modeling. Probab Eng Mech 2013; 34:123-130.
  39. Perrin G, Soize C, Duhamel D, Funfschilling C. Karhunen-Loève expansion revisited for vector-valued random fields: Scaling, errors and optimal basis. J Comput Phys 2013; 242:607-622.
  40. Pham K, Marigo J-J. Stability of homogeneous states with gradient damage models: Size effects and shape effects in the three-dimensional setting. J Elast 2013; 110(1):63-93.
  41. Shen WQ, Kondo D, Dormieux L, Shao JF. A closed-form three scale model for duc2tile rocks with a plastically compressible porous matrix. Mech Mater 2013; 59:73-86.
  42. Shen Y, Morgeneyer TF, Garnier J, Allais L, Helfen L, Crépin J. Three-dimensional quantitative in situ study of crack initiation and propagation in AA6061 aluminum alloy sheets via synchrotron laminography and finite-element simulations. Acta Mater 2013; 61(7):2571-2582.
  43. Szmytka F, Maitournam MH, Rémy L. An implicit integration procedure for an elasto-viscoplastic model and its application to thermomechanical fatigue design of automotive parts. Comput Struct 2013; 119:155-165.
  44. Tadmor EB, Legoll F, Kim WK, Dupuy LM, Miller RE. Finite-temperature quasi-continuum. Appl Mech Rev 2013; 65(1).
  45. Wang L, Bornert M, Chanchole S, Héripré E. Experimental investigation of the free swelling of crushed argillite. Geotech Lett 2013; 3(APRIL/JUN):89-92.
  46. Wang LL, Bornert M, Chanchole S, Yang DS, Héripré E, Tanguy A, et al. Micro-scale experimental investigation of the swelling anisotropy of the Callovo-Oxfordian argillaceous rock. Clay Miner 2013; 48(2):391-402.
  47. Zaccardi C, Chamoin L, Cottereau R, Ben Dhia H. Error estimation and model adaptation for a stochastic-deterministic coupling method based on the Arlequin framework. Int J Numer Methods Eng 2013; 96(2):87-109.


  1. Abrivard G, Busso EP, Forest S, Appolaire B. Phase field modelling of grain boundary motion driven by curvature and stored energy gradients. Part I: Theory and numerical implementation. Philos Mag 2012;92(28-30):3618-3642.
  2. Abrivard G, Busso EP, Forest S, Appolaire B. Phase field modelling of grain boundary motion driven by curvature and stored energy gradients. Part II: Application to recrystallisation. Philos Mag 2012;92(28-30):3643-3664.
  3. Belmeguenai M, Zighem F, Faurie D, Tuzcuoglu H, Chérif S-, Moch P, et al. Structural and magnetic properties of Co 2 MnSi thin films. Phys Status Solidi A Appl Mater Sci 2012; 209(7):1328-1333.
  4. Benoit A, Maitournam MH, Rémy L, Oger F. Cyclic behaviour of structures under thermomechanical loadings: Application to exhaust manifolds. Int J Fatigue 2012; 38:65-74.
  5. Bui HD, Constantinescu A, Maigre H. The inverse problem of seismic fault determination using part time measurements. J Mech Mater Struct 2012; 7(10):997-1007.
  6. Carrier B, Granet S. Numerical modeling of hydraulic fracture problem in permeable medium using cohesive zone model. Eng Fract Mech 2012; 79:312-328.
  7. Casanova A, Jason L, Davenne L. Bond slip model for the simulation of reinforced concrete structures. Eng Struct 2012; 39:66-78.
  8. Cosson B, Chevalier L, Régnier G. Simulation of the stretch blow moulding process: From the modelling of the microstructure evolution to the end-use elastic properties of polyethylene terephthalate bottles. Int J Mater Form 2012; 5(1):39-53.
  9. David M, Marigo J-J, Pideri C. Homogenized interface model describing inhomogeneities located on a surface. J Elast 2012; 109(2):153-157.
  10. De Crevoisier J, Besnard G, Merckel Y, Zhang H, Vion-Loisel F, Caillard J, et al. Volume changes in a filled elastomer studied via digital image correlation. Polym Test 2012; 31(5):663-670.
  11. El Arem S, Nguyen QS. Nonlinear dynamics of a rotating shaft with a breathing crack. Ann Solid Struct Mech 2012; 3(1-2):1-14. https://doi.org/10.1007/s12356-011-0025-5
  12. Forest S, Sab K. Stress gradient continuum theory. Mech Res Commun 2012; 40:16-25.
  13. Fritzen F, Forest S, Böhlke T, Kondo D, Kanit T. Computational homogenization of elasto-plastic porous metals. Int J Plast 2012; 29(1):102-119.
  14. He Z, Dormieux L, Lemarchand E, Kondo D. A poroelastic model for the effective behavior of granular materials with interface effect. Mech Res Commun 2012; 43:41-45.
  15. Lazzaroni G, Bargellini R, Dumouchel P-, Marigo J-J. On the role of kinetic energy during unstable propagation in a heterogeneous peeling test. Int J Fract 2012; 175(2):127-150.
  16. Le Bourlot C, Landois P, Djaziri S, Renault P-, Le Bourhis E, Goudeau P, et al. Synchrotron X-ray diffraction experiments with a prototype hybrid pixel detector. J Appl Crystallog 2012; 45(1):38-47.
  17. Monchiet V, Gruescu C, Cazacu O, Kondo D. A micromechanical approach of crack-induced damage in orthotropic media: Application to a brittle matrix composite. Eng Fract Mech 2012; 83:40-53.
  18. Monchiet V, Kondo D. Exact solution of a plastic hollow sphere with a Mises-Schleicher matrix. Int J Eng Sci 2012; 51:168-178.
  19. Maynadier A, Poncelet M, Lavernhe-Taillard K, Roux S. One-shot Measurement of Thermal and Kinematic Fields: InfraRed Image Correlation (IRIC). Exp Mech 2012; 52(3):241-255.
  20. N’Guyen, C. N., Barbe, F., Osipov, N., Cailletaud, G., Marini, B., & Petry, C. (2012). Micromechanical local approach to brittle failure in bainite high resolution polycrystals: A short presentation.Computational Materials Science, 64, 62-65.
  21. Nieto Ferro, A., Clouteau, D., Greffet, N., & Devésa, G. (2012). On a hybrid laplace-time domain approach to dynamic interaction problems. European Journal of Computational Mechanics, 21(3-6), 290-299.
  22. Perrin G, Soize C, Duhamel D, Funfschilling C. Identification of polynomial chaos representations in high dimension from a set of realizations. Siam J Sci Comput 2012;34(6):A2917-A2945.
  23. Pham K, Marigo J-J. Damage localization and rupture with gradient damage models. Frat Integrita Strutr 2012; 19:5-19.
  24. Rousselier G, Luo M, Mohr D. Macroscopic plasticity modeling of anisotropic aluminum extrusions using a Reduced Texture Methodology. Int J Plast 2012; 30-31:144-165.
  25. Shen WQ, Shao JF, Dormieux L, Kondo D. Approximate criteria for ductile porous materials having a Green type matrix: Application to double porous media. Comput Mater Sci 2012; 62:189-194.
  26. Torre-Casanova A, Jason L, Davenne L, Pinelli X. Confinement effects on the steel-concrete bond strength and pull-out failure. Eng Fract Mech 2012; 97(1):92-104.
  27. Trinh DK, Jänicke R, Auffray N, Diebels S, Forest S. Evaluation of generalized continuum substitution models for heterogeneous materials. Int J Multiscale Comput Eng 2012; 10(6):527-549.
  28. Vincent L, Le Roux J-, Taheri S. On the high cycle fatigue behavior of a type 304L stainless steel at room temperature. Int J Fatigue 2012; 38:84-91.
  29. Vu QH, Brenner R, Castelnau O, Moulinec H, Suquet P. A self-consistent estimate for linear viscoelastic polycrystals with internal variables inferred from the collocation method. Modell Simul Mater Sci Eng 2012; 20(2).
  30. Wang G, Zhao H, Bai J, Zhao Y-. Fabrication and mechanical properties of a micro/nanoscale hybrid composite. Int J Nonlinear Sci Numer Simul 2012; 13(2):153-157. 
  31. Wang HD, Berdin C, Mazière M, Forest S, Prioul C, Parrot A, et al. Experimental and numerical study of dynamic strain ageing and its relation to ductile fracture of a C-Mn steel. Mater Sci Eng A 2012; 547:19-31.
  32. Wroński S, Tarasiuk J, Bacroix B, Baczmański A, Braham C. Investigation of plastic deformation heterogeneities in duplex steel by EBSD. Mater Charact 2012; 73:52-60.
  33. Yang DS, Bornert M, Chanchole S, Gharbi H, Valli P, Gatmiri B. Dependence of elastic properties of argillaceous rocks on moisture content investigated with optical full-field strain measurement techniques. Int J Rock Mech Min Sci 2012; 53:45-55.


  1. Akian J-, Alexandre R, Bougacha S. A Gaussian beam approach for computing wigner measures in convex domains. Kinet Relat Models 2011; 4(3):589-631.
  2. Ammar K, Appolaire B, Cailletaud G, Forest S. Phase field modeling of elasto-plastic deformation induced by diffusion controlled growth of a misfitting spherical precipitate. Philos Mag Lett 2011; 91(3):164-172.
  3. Aslan O, Cordero NM, Gaubert A, Forest S. Micromorphic approach to single crystal plasticity and damage. Int J Eng Sci 2011; 49(12):1311-1325.
  4. Batou A, Soize C, Corus M. Experimental identification of an uncertain computational dynamical model representing a family of structures. Comput Struct 2011; 89(13-14):1440-1448.
  5. Ben Dhia H, Chamoin L, Oden JT, Prudhomme S. A new adaptive modeling strategy based on optimal control for atomic-to-continuum coupling simulations. Comput Methods Appl Mech Eng 2011; 200(37-40):2675-2696.
  6. Ben Dhia H, Torkhani M. Modeling and computation of fretting wear of structures under sharp contact. Int J Numer Methods Eng 2011; 85(1):61-83.
  7. Berthe L, Arrigoni M, Boustie M, Cuq-Lelandais JP, Broussillou C, Fabre G, et al. State-of-the-art laser adhesion test (LASAT). Nondestr Test Eval 2011;26(3-4):303-317.
  8. Chateau C, Gélébart L, Bornert M, Crépin J, Boller E, Sauder C, et al. In situ X-ray microtomography characterization of damage in SiCf/SiC minicomposites. Compos Sci Technol 2011; 71(6):916-924.
  9. Dautriat J, Bornert M, Gland N, Dimanov A, Raphanel J. Localized deformation induced by heterogeneities in porous carbonate analysed by multi-scale digital image correlation. Tectonophysics 2011; 503(1-2):100-116.
  10. David B, Bonnefont-Rousselot D, Oudina K, Degat M-, Deschepper M, Viateau V, et al. A perfusion bioreactor for engineering bone constructs: An in vitro and in vivo study. Tissue Eng Part C Methods 2011; 17(5):505-516.
  11. Devilliers C, Fayolle B, Laiarinandrasana L, Oberti S, Gaudichet-Maurin E. Kinetics of chlorine-induced polyethylene degradation in water Polym Degradation Stab 2011; 96(7):1361-1368.
  12. Djaziri S, Renault P-, Hild F, Le Bourhis E, Goudeau P, Thiaudire D, et al. Combined synchrotron X-ray and image-correlation analyses of biaxially deformed W/Cu nano-composite thin films on Kapton. J Appl Crystallog 2011; 44(5):1071-1079.
  13. Faurie D, Renault P-, Le Bourhis E, Chauveau T, Castelnau O, Goudeau P. X-ray strain analysis of {111} fiber-textured thin films independent of grain-interaction models. J Appl Crystallog 2011; 44(2):409-413.
  14. Forest S, Ammar K, Appolaire B. Micromorphic vs. phase-field approaches for gradient viscoplasticity and phase transformations. Lect Notes Appl Comput Mech 2011; 59 LNACM:69-88.
  15. Fournier B, Sauzay M, Pineau A. Micromechanical model of the high temperature cyclic behavior of 9-12%Cr martensitic steels. Int J Plast 2011; 27(11):1803-1816.
  16. Ghabezloo S, Hemmati S. Poroelasticity of a micro-heterogeneous material saturated by two immiscible fluids. Int J Rock Mech Min Sci 2011; 48(8):1376-1379.
  17. Aslan O, Cordero NM, Gaubert A, Forest S. Micromorphic approach to single crystal plasticity and damage. Int J Eng Sci 2011; 49(12):1311-1325.
  18. Hollner S, Fournier B, Le Pendu J, Caes C, Tournie I, Pineau A. Effect of thermo-mechanical treatments on creep and fatigue properties of 9%Cr martensitic steels. Rev Metall 2011; 108(2):75-81.
  19. Libert M, Rey C, Vincent L, Marini B. Temperature dependant polycrystal model application to bainitic steel behavior under tri-axial loading in the ductile-brittle transition. Int J Solids Struct 2011; 48(14-15):2196-2208.
  20. Lim R, Sauzay M, Dalle F, Tournie I, Bonnaillie P, Gourgues-Lorenzon A-. Modelling and experimental study of the tertiary creep stage of Grade 91 steel. Int J Fract 2011; 169(2):213-228.
  21. Mallat A, Alliche A. A modified tensile test to study the behaviour of cementitious materials. Strain 2011; 47(6):499-504.
  22. Mallat A, Alliche A. Mechanical investigation of two fiber-reinforced repair mortars and the repaired system. Constr Build Mater 2011; 25(4):1587-1595.
  23. Merckel Y, Diani J, Roux S, Brieu M. A simple framework for full-network hyperelasticity and anisotropic damage. J Mech Phys Solids 2011; 59(1):75-88.
  24. Monchiet V, Charkaluk E, Kondo D. A micromechanics-based modification of the Gurson criterion by using Eshelby-like velocity fields. Eur J Mech A Solids 2011; 30(6):940-949.
  25. Museur L, Brasse G, Pierret A, Maine S, Attal-Tretout B, Ducastelle F, et al. Exciton optical transitions in a hexagonal boron nitride single crystal. Physica Status Solidi Rapid Res Lett 2011; 5(5-6):214-216.
  26. Nguyen QT, Caré S, Berthaud Y, Millard A, Ragueneau F. Experimental and numerical behaviour of reinforced mortar plates subjected to accelerated corrosion. Int J Numer Anal Methods Geomech 2011; 35(10):1141-1159.
  27. Pham K, Marigo J-J, Maurini C. The issues of the uniqueness and the stability of the homogeneous response in uniaxial tests with gradient damage models. J Mech Phys Solids 2011; 59(6):1163-1190.
  28. Rupil J, Vincent L, Hild F, Roux S. Identification and probabilistic modeling of mesocrack initiations in 304l stainless steel. Int J Multiscale Comput Eng 2011; 9(4):445-458.
  29. Shen WQ, Lin J, Zhu QZ, Monchiet V, Kondo D. Macroscopic yield criterion for ductile materials containing randomly oriented spheroidal cavities. Int J Damage Mech 2011; 20(8):1198-1216.
  30. Teyssedre H, Roux S, Régnier G, Tracz A. Filtering out slow-scan drifts in atomic force microscopy images. J Strain Anal Eng Des 2011; 46(5):361-367.
  31. Wang H, Berdin C, Mazire M, Forest S, Prioul C, Parrot A, et al. Portevin-Le Chatelier (PLC) instabilities and slant fracture in C-Mn steel round tensile specimens. Scripta Mater 2011; 64(5):430-433.
  32. Yang D, Bornert M, Chanchole S, Wang L, Valli P, Gatmiri B. Experimental investigation of the delayed behavior of unsaturated argillaceous rocks by means of Digital Image Correlation techniques. Appl Clay Sci 2011; 54(1):53-62.


  1. Abdelmoula R, Marigo J-J, Weller T. Construction and justification of Paris-like fatigue laws from Dugdale-type cohesive models. Ann Solid Struct Mech 2010; 1(3):139-158.
  2. Auzoux Q, Allais L, Caës C, Monnet I, Gourgues AF, Pineau A. Effect of pre-strain on creep of three AISI 316 austenitic stainless steels in relation to reheat cracking of weld-affected zones. J Nucl Mater 2010; 400(2):127-137.
  3. Boittin G., Gallerneau F., Locq D., Kanoute P., Cailletaud G., Numerical modelling of the microstructure effect on fatigue behaviour of Ni-base superalloys for turbine disk,Technische Mechanik, 2010, 30, p. 15-28
  4. Bornert, M., Valès, F., Gharbi, H., & Nguyen Minh, D. (2010). Multiscale full-field strain measurements for micromechanical investigations of the hydromechanical behaviour of clayey rocks. Strain, 46(1), 33-46.
  5. Bouchelaghem F, Benhamida A, Quoc Vu Nonlinear mechanical behaviour of cemented soils. Comput Mater Sci 2010; 48(2):287-295.
  6. Bui HD, Oueslati A. On the stick-slip waves under unilateral contact and Coulomb friction. Ann Solid Struct Mech 2010; 1(3):159-172.
  7. Bui HD, Chaillat S, Constantinescu A, Grasso E. Identification of a planar crack in Zener type viscoelasticity. Ann Solid Struct Mech 2010; 1(1):3-8.
  8. Caré S, Nguyen QT, Beddiar K, Berthaud Y. Times to cracking in reinforced mortar beams subjected to accelerated corrosion tests. Mater Struct 2010; 43(1-2):107-124.
  9. Chambolle A, Francfort GA, Marigo J-J. Revisiting energy release rates in brittle fracture. J Nonlinear Sci 2010; 20(4):395-424.
  10. Chamoin L, Prudhomme S, Dhia HB, Oden T. Ghost forces and spurious effects in atomic-to-continuum coupling methods by the arlequin approach. Int J Numer Methods Eng 2010; 83(8-9):1081-1113.
  11. Chateau C., Gélébart L., Bornert M., Crépin J., Caldemaison D., Multiscale approach of mechanical behaviour of SiC/SiC composites : elastic behaviour at the scale of the tow, Technische mechanik, 2010, 30 p. 45-55
  12. Cordero NM, Gaubert A, Forest S, Busso EP, Gallerneau F, Kruch S. Size effects in generalised continuum crystal plasticity for two-phase laminates. J Mech Phys Solids 2010; 58(11):1963-1994.
  13. Cottereau, R., Chamoin, L., & Díez, P. (2010). Strict error bounds for linear and nonlinear solid mechanics problems using a patch-based flux-free method. Mécanique Et Industries, 11(3-4), 249-254. 
  14. Djaziri S, Thiaudière D, Geandier G, Renault P-, Le Bourhis E, Goudeau P, Castelnau., O. Controlled biaxial deformation of nanostructured W/Cu thin films studied by X-ray diffraction. Surf Coat Technol 2010; 205(5):1420-1425.
  15. Faurie D, Djemia P, Le Bourhis E, Renault P-, Roussigné Y, Chérif SM, Castelnau., O. Elastic anisotropy of polycrystalline Au films: Modeling and respective contributions of X-ray diffraction, nanoindentation and Brillouin light scattering. Acta Mater 2010; 58(15):4998-5008. x
  16. Fournier B, Salvi M, Dalle F, De Carlan Y, Caës C, Sauzay M, et al. Lifetime prediction of 9-12%Cr martensitic steels subjected to creep-fatigue at high temperature. Int J Fatigue 2010; 32(6):971-978.
  17. Geandier, G., Thiaudière, D., Randriamazaoro, R. N., Chiron, R., Djaziri, S., Lamongie, B., et al. (2010). Development of a synchrotron biaxial tensile device for in situ characterization of thin films mechanical response. Review of Scientific Instruments, 81(10), 103903.
  18. Gélébart L, Chateau C, Bornert M, Crépin J, Boller E. X-ray tomographic characterization of the macroscopic porosity of chemical vapor infiltration SIC/SIC composites: Effects on the elastic behavior. Int J Appl Ceram Technol 2010; 7(3):348-360.
  19. Giroux PF, Dalle F, Sauzay M, Malaplate J, Fournier B, Gourgues-Lorenzon AF. Mechanical and microstructural stability of P92 steel under uniaxial tension at high temperature. Mater Sci Eng A 2010; 527(16-17):3984-3993.
  20. Hall SA, Bornert M, Desrues J, Pannier Y, Lenoir N, Viggiani G, et al. Discrete and continuum analysis of localised deformation in sand using X-ray μCT and volumetric digital image correlation. Geotechnique 2010; 60(5):315-322.
  21. Hollner S, Fournier B, Le Pendu J, Cozzika T, Tournié I, Brachet J-C, et al. High-temperature mechanical properties improvement on modified 9Cr-1Mo martensitic steel through thermomechanical treatments. J Nucl Mater 2010; 405(2):101-108.
  22. Limodin N, Réthoré J, Buffière J-H, Hild F, Roux S, Ludwig W, et al. Influence of closure on the 3D propagation of fatigue cracks in a nodular cast iron investigated by X-ray tomography and 3D volume correlation. Acta Mater 2010; 58(8):2957-2967.
  23. Martin E, Leguillon D, Carrère N. A twofold strength and toughness criterion for the onset of free-edge shear delamination in angle-ply laminates. Int J Solids Struct 2010; 47(9):1297-1305.
  24. Pham K, Marigo J-J. The variational approach to damage: II. The gradient damage models. C R Mec 2010; 338(4):199-206.
  25. Pham K, Marigo J-J. The variational approach to damage: I. The foundations. C R Mec 2010; 338(4):191-198.
  26. Poncelet M, Barbier G, Raka B, Courtin S, Desmorat R, Le-Roux JC, et al. Biaxial high cycle fatigue of a type 304L stainless steel: Cyclic strains and crack initiation detection by digital image correlation. Eur J Mech A Solids 2010; 29(5):810-825.
  27. Poncelet M, Barbier G, Raka B, Vincent L, Desmorat R. Damage study of an austenitic stainless steel in high cycle multiaxial fatigue regime. Rev Metall 2010; 107(2-3):51-57.
  28. Parret-Fréaud A, Rey C, Gosselet P, Feyel F. Fast estimation of discretization error for FE problems solved by domain decomposition. Comput Methods Appl Mech Eng 2010; 199(49-52):3315-3323.
  29. Schwartz J, Fandeur O, Rey C. Fatigue initiation modeling of 316ln steel based on nonlocal plasticity theory. J ASTM Int 2010; 7(7).
  30. Szmytka F, Rémy L, Maitournam H, Köster A, Bourgeois M. New flow rules in elasto-viscoplastic constitutive models for spheroidal graphite cast-iron. Int J Plast 2010; 26(6):905-924.
  31. Vincent L, Libert M, Marini B, Rey C. Towards a modelling of RPV steel brittle fracture using crystal plasticity computations on polycrystalline aggregates. J Nucl Mater 2010; 406(1):91-96.
  32. Vattré, A., Devincre, B., Roos, A., & Feyel, F. (2010). Predicting size effects in nickel-base single crystal superalloys with the discrete-continuous model. Eur J Comput Mech, 19(1-3), 65-76.
  33. Vattré A, Devincre B, Roos A. Orientation dependence of plastic deformation in nickel-based single crystal superalloys: Discrete-continuous model simulations. Acta Mater 2010; 58(6):1938-1951.


  1. Abdelmoula R, Marigo J-, Weller T. Construction of fatigue laws from cohesive forces models: the mode I case. C R Mec 2009;337(3):166-172.
  2. Abdelmoula, J.J. Marigo, T. Weller (2009) Construction of a fatigue law from a cohesive force model : the mode III case, Comptes rendus – Mécanique, 337, p. 53-59
  3. Bargellini, J. Besson, E. Lorentz, S. Michel-Ponnelle (2009) A non local finite element based on volumetric strain gradient : application to ductile fracture, Computational materials science, 2009, 45, p. 762-767
  4. Cantournet S, Desmorat R, Besson J. Mullins effect and cyclic stress softening of filled elastomers by internal sliding and friction thermodynamics model. Int J Solids Struct 2009;46(11-12):2255-2264.
  5. Gérard C, Bacroix B, Bornert M, Cailletaud G, Crépin J, Leclercq S. Hardening description for FCC materials under complex loading paths. Comput Mater Sci 2009;45(3):751-755.
  6. Moumni, W. Zaki, H. Maitournam (2009) Cyclic behaviour and energy approach of the fatigue of Shape Memory Alloys, in press Journal of Mechanics of Materials and Structures, 25
  7. U.Q. Huy, F. Bouchelaghem, B.H. Abdelwahed (2009) A micromechanical numerical modelling approach for the homogenisation of grouted sands, International journal of computer applications in technology, 2009, 34, p. 72-82
  8. Kubin, T. Hoc, B. Devincre (2009) Dynamic recovery and its orientation dependence in face-centered cubic crystals, Acta materialia, 2009, p. 2567-2575
  9. Ferdjani, R. Abdelmoula, J.J. Marigo, S. El Borgi (2009) Study of size effects in the Dugdale model through the case of a crack in a semi-infinite plane under anti-plane shear loading, Continuum mechanics and thermodynamics, 21, p. 41-55
  10. Amor, J.J. Marigo, C. Maurini (2009) Regularized formulation of the variational brittle fracture with unilateral contact : numerical experiments, Journal of the mechanics and physics of solids, 57, p. 1209-1229
  11. Gérard, F. N’Guyen, N. Osipov, G. Cailletaud, M. Bornert, D. Caldemaison (2009) Comparison of experimental results and finite element simulation of strain localization scheme under cyclic loading, Computational materials science, 46, p. 755-760
  12. Triconnet, K. Derrien, F. Hild, D. Baptiste (2009) Parameter choice for optimized digital image correlation, Optics and lasers in engineering, 47, p. 728-737
  13. Belotteau, C. Berdin, S. Forest, A. Parrot, C. Prioul (2009) Mechanical behavior and crack tip plasticity of a strain aging sensitive steel, Materials Science & Engineering A, 526, p. 156-165
  14. Héripré E, Crépin J, Roos A, Chaboche J-. Influence of boundary conditions on strain field analysis for polycrystalline finite element simulations. Eur J Comput Mech 2009;18(3-4):333-351.


  1. Avril, M. Bonnet, A-S. Bretelle, M. Grédiac, F. Hild, P. Ienny, F. Latourte, D. Lemosse, S. Pagano, E. Pagnacco, F. Pierron (2008) Overview of identification methods of mechanical parameters based on full-field measurements. Experimental Mechanics, 48, p. 381-402
  2. Szmytka, M. Bourgeois, T.M.L. Nguyen-Tajan, L. Rémy, A. Koster, H. Maitournam (2008) Development of a new model of élasto-visco-plasticity application to the fatigue design of an exhaust manifold of a diesel engine, Revue de métallurgie CIT, 105, p. 341-346
  3. Kubin, B. Devincre, T. Hoc (2008) Modeling dislocation storage rates and mean free paths in face-centered cubic crystals, Acta materialia, 56, p. 6040-6049
  4. Huy, V.U.Q., Abdelwahed, B.H., Bouchelaghem, F. (2008)A micromechanical numerical modelling approach for the homogenisation of grouted sands, Journal of Computer Applications in Technology, Volume 34, Issue 1, January 2009, Pages 72-82
  5. Abdelmoula, R., J.-J.Marigo, Weller, T. (2008), Construction of a fatigue law from a cohesive force model : the mode III case, Comptes Rendus – Mecanique, in press
  6. Arnst, D. Clouteau, M. Bonnet (2008) Inversion of probabilistic structural models using measured transfer functions, Computer methods in applied mechanics and engineering, 197, 589-608
  7. Desmorat, S. Cantournet (2008) Modeling microdefects closure effect with isotropic/anisotropic damage, International journal of damage mechanics, 17, 65-96
  8. Devincre, T. Hoc, L. Kubin (2008) Dislocation mean free paths and strain hardening of crystals, Science, 320, 1745-1748
  9. Kubin, B. Devincre, T. Hoc (2008) Toward a physical model for strain hardening in fcc crystals, Materials Science and Engineering A483-484, 19-24
  10. Lorentz, J. Besson, V. Cano (2008) Numerical simulation of ductile fracture with the Rousselier constitutive law, Computer methods in applied mechanics and engineering, 197, 1965-1982
  11. Moumni, W. Zaki, Q.S. Nguyen (2008) Theoretical and numerical modeling of solid-solid phase change : Application to the description of the thermomechanical behavior of shape memory alloys, International Journal of Plasticity, Vol. 24:614-645
  12. Peyre, P. Aubry, R. Fabbro, R. Neveu, A. Longuet (2008) Analytical and numerical modelling of the direct metal deposition laser process, Journal of physics D : applied physics, 41, 025403, 10
  13. St-Pierre, E. Héripré, M. Dexet, J. Crépin, G. Bertolino, N. Bilger (2008) 3D simulations of microstructure and comparison with experimental microstructure coming from O.I.M analysis, International Journal of Plasticity, 24, 1516-1532
  14. Caré, Q.T. Ngyuen, V. L’Hostis, Y. Berthaud (2008) Mechanical properties of the rust layer induced by impressed current method in reinforced mortar, Cement and Concrete Research, 38, 1079–1091, doi:10.1016/j.cemconres.2008.03.016
  15. Karrech, A.; Duhamel, D.; Bonnet, G.; Chevoir, F.; Roux, J.-N.; Canou, J.; Dupla, J.-C., «A discrete element study of settlement in vibrated granular layers: role of contact loss and acceleration», Granular Matter, 10 5 369-375
  16. Nguyen, T.-K.; Sab, K.; Bonnet, G., «First-order shear deformation plate models for functionally graded materials», Composite Structures, 83 1 25-36 (2008)
  17. Nguyen, T.-K.; Sab, K.; Bonnet, G., «Green’s operator for a periodic medium with traction-free boundary conditions and computation of the effective properties of thin plates», International Journal of Solids and Structures, 45 25-26 6518-6534 (2008)


  1. Alfaro, J. Yvonnet, F. Chinesta, E. Cueto (2007) A study on the performances of natural-neighbour-based Galerkin methods, International Journal for Numerical Methods in Engineering, 71(12) 1436-1465
  2. Badel, V. Godard, J.B. Leblond (2007) Application of some anisotropic damage model to the prediction of the failure of some complex industrial concrete structure, International Journal of Solids and Structures, 44, 5848-5874
  3. Chaillat S, Bui HD. Resolution of linear viscoelastic equations in the frequency domain using real Helmholtz boundary integral equations. C R Mec 2007;335(12):746-750.
  4. Corfdir, G. Bonnet (2007) Validity conditions of the direct boundary integral equation for exterior problems of plane elasticity, Comptes Rendus Mecanique, 335, 219-224
  5. Cottereau, D. Clouteau, C. Soize (2007) Construction of a probabilistic model for impedances matrices, Computer Methods in Applied Mechanics and Engineering, 39(6), 831-838
  6. Cottereau, D. Clouteau, C. Soize (2007) Parametric and nonparametric models of the impedance matrix of a random medium, European Journal of Computational Mechanics
  7. Cottereau, D. Clouteau, C. Soize (2007) Parametric and nonparametric probabilistic impedance of foundation : impact on the seismic design on uncertain soils, Earthquake Engineering and Structural Dynamics
  8. Desmorat, A. Kane, M. Seyedi, J.P. Sermage (2007) Two scale damage model and related numerical issues for thermo-mechanical high cycle fatigue, European Journal of Mechanics, 26, 909-935
  9. Devincre, L. Kubin, T. Hoc (2007)Collinear superjogs and the low-stress response of fcc crystals, Scripta Materialia, 57, 905-908.
  10. E. Dumouchel, J.J. Marigo, M. Charlotte (2007) Rupture dynamique et fissuration quasi-statique instable, Comptes Rendus Mecanique, 708-713
  11. Germain, J. Besson, F. Feyel, P. Gosselet (2007) High-performance parallel simulation of structure degradation using non-local damage models, International Journal for Numerical Methods in Engineering, 71, 253-276
  12. Héripré, M. Dexet, J. Crépin, L. Gélébart, A. Roos, M. Bornert, D. Caldemaison (2007) Coupling between experimental measurements and polycrystal finite element calculations for micromechanical study of metallic materials, International Journal of Plasticity, 23, 1512–1539
  13. Karrech, D. Duhamel, G. Bonnet, J. Canou, J.C. Dupla, J.N. Roux, F. Chevoir (2007) A computational procedure for the prediction of settlement in granular materials under cyclic loading, Computer Methods in Applied Mechanics and Engineering, 197, 80-94
  14. Lefebvre, B. Devincre, T. Hoc (2007) Yield stress strengthening in ultrafine-grained metals : a two-dimensional simulation of dislocation dynamics, Journal of the Mechanics and Physics of Solids, 55, 788-802
  15. Marcadon, E. Hervé, A. Zaoui (2007) Micromechanical modeling of packing and size effects in particulate composites, International Journal of Solids and Structures, 44 8213−8228
  16. J. Marigo, A. Benallal (2007) Bifurcation and stability issues in gradient theories with softening. Modelling and Simulation in Materials Science and Engineering. Vol 15. Num 1. S283-S295
  17. T. Nguyen, S Caré, A. Millard, Y. Berthaud (2007) Analyse de la fissuration du béton armé en corrosion accélérée. Comptes Rendus Mecanique. Vol 335. Num 2, 99-104
  18. Othman, G. Gary (2007) Testing aluminium alloy from quasi-static to dynamic strain rates with a modified split Hopkinson bar method, Experimental Mechanics, 47 295-299


  1. Andrieux, H.D. Bui (2006) Ecart à la réciprocité et identification de fissures en thermoélasticité isotrope transitoire, Comptes Rendus Mecanique, 334, 225-229
  2. Arnst, D. Clouteau, H. Chebli, R. Othman and G. Degrande (2006) A non-parametric probabilistic model for ground-borne vibrations in buildings, Journal of Probabilistic Engineering Mechanics, vol. 21, num. 1, 18-34
  3. Bastier, H. Maitournam, K. Dang Van and F. Roger (2006) Steady state thermomechanical modelling of friction stir welding, Science and Technology of Welding and Joining, Vol. 11:278-288
  4. Bastier, H. Maitournam, K. Dang Van and F. Roger (2006) Modélisation numérique du Friction Stir Welding, Revue Européenne des Eléments Finis, Vol. 15(1-2-3)
  5. Castelnau, P. Goudeau, G. Geandier, N. Tamura, J.L. Béchade, M. Bornert, D. Caldemaison (2006) White beam microdiffraction experiments for the determination of the local plastic behaviour of polycrystals, Materials Science Forum, 524-525, 103-108
  6. Charlotte, J. Laverne, J.J. Marigo (2006) Initiation of cracks with cohesive force models : a variational approach, European Journal of Mechanics, 25, 649-669
  7. Devincre, L. Kubin, T. Hoc (2006) Physical analyses of crystal plasticity by DD simulations, Scripta Materialia, Volume 54, Issue 5, 741-746
  8. P. Kubin, B. Devincre, T. Hoc (2006)Inhibited dynamic recovery and screw dislocation annihilation in multiple slip of fcc single crystals, Philosophical Magazine, 86 , 4023-4036
  9. Phelippeau, S. Pommier, T. Tsakalakos, M. Clavel, C. Prioul (2006) Cold drawn steel wires—processing, residual stresses and ductility Part I : Metallography and finite element analyses Fatigue & Fracture of Engineering Materials and Structures, 29, 3, 242-253
  10. Phelippeau, S. Pommier, I. Zakharchenko, R. Levy-Tubiana, T. Tsakalakos, M. Clavel, M. Croft, Z. Zhong, C. Prioul (2006) Cold drawn steel wires—processing, residual stresses and ductility Part II : Synchrotron and neutron diffraction, Fatigue & Fracture of Engineering Materials and Structures, 29, 3, 255-265
  11. Seyedi, S. Taheri, F. Hild (2006) Numerical modeling of crack propagation and shielding effects in a stripting network, Nuclear Engineering and Design, 236, 954-964
  12. Woestyn, A. Delaplace, P. Koechlin (2006) Analyse de la rupture fragile du béton par un modèle discret, Revue Européenne de Génie Civil, Vol. 10, 10, 1281-1308
  13. T. Nguyen, A. Millard, S. Caré, V. L’Hostis, Y. Berthaud (2006) Fracture of concrete caused by the reinforcement corrosion products, Journal de Physique IV, 136, 109-120
  14. Ouglova, M. François, Y. Berthaud, S. Caré and F. Foct (2006) Mechanical properties of an iron oxide formed by corrosion in reinforced concrete structures, Journal de Physique IV ,136,99-107


  1. Devincre, T. Hoc, L. P. Kubin (2005) Collinear interactions of dislocations and slip systems, Materials Science and Engineering A400-401, 182-185
  2. Graff, S. Forest, J.L. Strudel, P. Pilvin, C. Prioul, J.L. Béchade (2005) Finite element simulations of dynamic strain ageing effects at V-notches and crack tips. Scripta Materialia, 52, 1181-1186
  3. A. Lebensohn, O. Castelnau, R. Brenner, P. Gilormini (2005) Study of the antiplane deformation of linear 2-D polycrystals with different microstructures, International Journal of Solids and Structures, 42, 5441-5459
  4. Lefebvre, B. Devincre, T. Hoc (2005) Simulation of the Hall–Petch effect in ultra-fine grained copper, Materials Science and Engineering A, 400-401, 150-153
  5. Lorentz, A. Benallal (2005) Gradient constitutive relations : numerical aspects and application to gradient damage, Computer Methods in Applied Mechanics and Engineering, 194, 5191-5220
  6. S. Nguyen, S. Andrieux (2005) The non-local generalized standard approach : a consistent gradient theory, Comptes Rendus Mecanique, 333, 139-145
  7. Pommier, M. Risbet (2005) Time derivative equations for mode I fatigue crack growth in metals, International Journal of Fatigue, 27, 1297-1306
  8. Liu, Y., Gilormini, P. Ponte Castañeda, P (2005) Homogenization estimates for texture evolution in halite, Tectonophysics Volume 406, Issue 3-4, 9 September 2005, Pages 179-195


  1. Carrere, R. Valle, T. Bretheau, J.L. Chaboche (2004) Multiscale analysis of the transverse properties of Ti-based matrix composites reinforced by SiC fibres : from the grain scale to the macroscopic scale, International Journal of Plasticity, 20, 783-810
  2. Bornert, J.M. Chaix, P. Doumalin, J.C. Dupré, T. Fournel, D. Jeulin, E. Maire, M. Moreaud et H. Moulinec (2004) Mesure tridimensionnelle de champs cinématiques par imagerie volumique pour l’analyse des matériaux et des structures, Instrumentation, Mesure, Métrologie, Vol 4 n° 3-4, 43-88
  3. Gosselet, V. Chiaruttini, C. Rey, F. Feyel (2004) A Monolithic strategy based on an hybrid domain decomposition method for multiphysic problems. Application to poroelasticity. European Journal of Computational Mechanics, 13, 523-534
  4. Graff, S. Forest, J.L. Strudel, C. Prioul P. Pilvin, J.L. Béchade (2004) Strain localization phenomena associated with static and dynamic strain ageing in notched specimens : experiments and finite element simulations. Materials Science and Engineering, 387, 181-185
  5. Roos, J.L. Chaboche, L. Gélébart, J. Crépin (2004) Multiscale modelling of titanium aluminides, International Journal of Plasticity, 20, 811-830
  6. Tcharkhtchi, F. Chinesta, E. Perrot (2004) Simulation of thermal phenomena on the interface molten polymer during rotational molding, International Polymer Process, 19, 296-302


  1. Brenner, O. Castelnau, P. Gilormini (2003) The modified affine homogenisation scheme for nonlinear composites : Comparison with variational bounds and estimates, Journal of Physics Phys. IV, 105, 107-113
  2. Cailletaud, S. Forest, D. Jeulin, F. Feyel, I. Galliet, V. Mounoury, S. Quilici (2003) Some elements of microstructural mechanics, Computational Materials Science, 27, 351-374
  3. Hoc, J. Crépin, L. Gélébart, A. Zaoui (2003) A procedure for identifying the plastic behavior of single crystals from the local response of polycrystals, Acta Materialia, 51, 5479-5490
  4. Madec, B. Devincre, L. P. Kubin, T. Hoc, D. Rodney (2003) The role of collinear interaction in dislocation-induced hardening, Science, 301, 1879-1882