Accueil > Production scientifique > Articles

Articles

samedi 13 février 2016, par F2M

Articles de revue à comité de lecture et chapitres d’ouvrage :

2015
2014
2013
2012
2011
2010
2009
2008
2007
2006
2005
2004
2003


-  2015

  • AUFFRAY N., DIRRENBERGER J., ROSI G., A complete description of bi-dimensional anisotropic strain-gradient elasticity, International journal of solids and structures, 2015, 69-70, p. 195-206
  • BERNACHY BARBE F., GELEBART L., BORNERT M., CREPIN J., SAUDER C., Characterization of SiC/SiC composites damage mechanisms using digital image correlation at the tow scale, Composites A, 2015, 68, p. 101-109
  • BERNACHY BARBE F., GELEBART L., BORNERT M., CREPIN J., SAUDER C., Anisotropic damage behavior of SiC/SiC composite tubes : multiaxial testing and damage characterization, Composites A, 76, p. 281-288
  • CAILLETAUD G., QUILICI S., AZZOUZ F., CHABOCHE J.L., A dangerous use of the fading memory term for non linear kinematic models at variable temperature, European journal of mechanics A, 2015, 54, p. 24-29
  • CAO T.S., MAZIERE M., DANAS K., BESSON J., A model for ductile damage prediction at low stress triaxialities incorporating void shape change and void rotation, International journal of solids and structures, 2015, 63, p. 240-263
  • CARUEL M., ALLAIN J.M., TRUSKINOVSKY L., Mechanics of collective unfolding, Journal of the mechanics and physics of solids, 2015, 76, p. 237-259
  • CHENG L., MONCHIET V., MORIN L., DE SAXCE G., KONDO D., An analytical Lode angle dependent damage model for ductile porous materials, Engineering fracture mechanics, 2015, 149, p. 119-133
  • CHATEAU C., GELEBART L., BORNERT M., CREPIN J., Micromechanical modeling of the elastic behavior of unidirectional CVI SiC/SiC composites, International journal of solids and structures, 2015, 58, p. 322-334
  • CORFDIR A., BONNET G., Variational formulation and upper bounds for degenerate scales in plane elasticity, Journal of elasticity, 2015, 118, p. 207-221
  • DETREZ F., CASTELNAU O., CORDIER P., MERKEL S., RATERRON P., Effective viscoplastic behavior of polycrystalline aggregates lacking four independent slip systems inferred from homogenization methods : application to olivine, Journal of the mechanics and physics of solids, 2015, 83, p. 199-220
  • DORMIEUX L., KONDO D., Exact solutions for an elastic damageable hollow sphere subjected to isotropic mechanical loadings, International journal of mechanical sciences, 2015, 90, p. 25-32
  • DRISSI S., EDDHAHAK A., CARE S., NEJI J., Thermal analysis by DSC of phase change materials, study of the damage effet, Journal of building engineering, 2015, 1, p. 13-19
  • FELD PAYET S., CHIARUTTINI V., BESSON J., FEYEL F., A new marching ridges algorithm for crack path tracking in regularized media, International journal of solids and structures, 2015, 71, p. 57-69
  • GOSSELET P., RIXEN D., ROUX F.X., SPILLANE N., Simultaneous FETI and block FETI : robust domain decomposition with multiple search directions, International journal for numerical methods in engineering, 2015, 104, p. 905-927
  • GU T., HERVE LUANCO E., PROUDHON H., THILLY L., DUBOIS J.B. et al., Modélisation multi échelle du comportement électrique de nano composites Cu-Nb, Matériaux et techniques, 2015, 103, 309, 9 p.
  • GUINARD C., MONTAY G., GUIPONT V., JEANDIN M., GIRARDOT J., SCHNEIDER M., Residual stress analysis of laser-drilled thermal barrier coatings involving various bond coats, Journal of the thermal spray technology, 2015, 24, p. 252-262
  • ILTCHEV A., MARCADON V., KRUCH S., FOREST S., Computation homogenization of periodic cellular materials : application to structural modelling, International journal of mechanical sciences, 2015, 93, p. 240-255
  • LE JOLU T., MORGENEYER T., DENQUIN A., GOURGUES LORENZON A.F., Fatigue lifetime and tearing resistance of AA2198 Al-Cu-Li alloy friction stir welds : effect of defects, International journal of fatigue, 2015, 70, p. 463-472
  • MONTEIL M., THOMAS O., TOUZE C., Identification of mode couplings in nonlinear vibrations of the steelpan, Applied acoustics, 2015, 89, p. 1-15
  • NGUYEN M.T., DESCELIERS C., SOIZE C., ALLAIN J.M., GHARBI H., Multiscale identification of the random elasticity field at mesoscale of a heterogeneous microstructure using multiscale experimental observations, International journal for multiscale computational engineering, 2015, 13, p. 281-295
  • NGUYEN T.T., YVONNET J., ZHU Q.Z., BORNERT M., CHATEAU C., A phase field method to simulate crack nucleation and propagation in strongly heterogeneous materials from direct imaging of their microstructure, Engineering fracture mechanics, 2015, 139, p. 18-39
  • OVARLEZ G., MAHAUT F., DEBOEUF S., LENOIR N., HORMOZI S., et al., Flows of suspensions of particles in yield stress fluids, Journal of rheology, 2015, 59, p. 1449-1486
  • PALLARES G., GEORGE M., PONSON L., CHAPULIOT S., ROUX S., CICCOTTI M., Multiscale investigation of stress corrosion crack propagation mechanisms in oxide glasses, Corrosion reviews, 2015, 33, p. 501-514
  • PERRIN G., DUHAMEL D., SOIZE C., FUNFSCHILLING C., Quantification of the influence of the track geometry variability on the train dynamics, Mechanical systems and signal processing, 2015, 60-61, p. 945-957
  • RANC N., BLANCHE A., RYCKELYNCK D., CHRYSOCHOOS A., POD preprocessing of IR thermal data to assess heat source distributions, Experimental mechanics, 2015, 55, p. 725-739
  • ROMANI R., BORNERT M., LEGUILLON D., LE ROY R., SAB K., Detection of crack onset in double cleavage drilled specimens of plaster under compression by digital image correlation, European journal of mechanics, 2015, 51, p. 172-182
  • TAILLANDIER THOMAS T., MORGENEYER T., ROUX S., HILD F., On the use of regularized DVC to analyze strain localization, in : Advancement of optical methods in experimental mechanics, vol 3, ed. H.Jin, C. Sciammarella, S. Yoshida, L. Lamberti, Springer, 2015, p. 161-166
  • VILLANI A., BUSSO E.P., FOREST S., Field theory and diffusion creep predictions in polycrystalline aggregates, Modelling and simulation in materials science and engineering, 2015, 23, 055006, 24 p.
  • VU M.N., GENIAUT S., MASSIN P., MARIGO J.J., Numerical investigation on corner singularities in cracked plates using the G-theta method with an adapted theta field, Theoretical and applied fracture mechanics, 2015, 77, p. 59-68
  • WANG W., ROUBIER, PUEL G., ALLAIN J.M., INFANTE I.C., ATTAL J.P., VENNAT E., A new method combining finite element analysis and digital image correlation to assess macroscopic mechanical properties of dentin, Dental Materials, 2015, 8, p. 535-550
  • WANG L.L., BORNERT M., HERIPRE E., CHANCHOLE S., POUYA A., HALPHEN B., The mechanisms of deformation and damge of mudstones : a micro-scale study combining ESEM and DIC, Rock mechanics and rock engineering, 2014 in press
  • WOLINNE G., HARNISCH C., HERIPRE E., RUCH S., SALITO A., JEANDIN M., CORTE L., Mechanical study of novel VPS titanium coating of polyethylene substrates, Journal of thermal spray technology, 2014, 24, p. 206-214


-  2014

  • ALAYLI N., SCHOENSTEIN F., GIRARD A., TAM K.L., DAHOO P.R., Spark plasma sintering constrained process parameters of sintered silver paste for connection in power electronic modules : microstructure, mechanical and thermal properties, Materials chemistry and physics, 2014, 148, p. 125-133
  • AMMAR K., APPOLAIRE B., FOREST S., COTTURA M., LE BOUAR Y., FINEL A., Modelling inheritance of plastic deformation during migration of phase boundaries using a phase field method, Meccanica, 2014, 49, p. 2699-2717
  • BAYDOUN I., SAVIN E., COTTEREAU R., CLOUTEAU D., GUILLEMINOT J., Kinetic modeling of multiple scattering of elastic waves in heterogeneous anisotropic media, Wave motion, 2014, 51, p. 1325-1348
  • BENOIT A., REMY L., KOSTER A., MAITOURNAM H., OGER F., Experimental investigation of the behaviour and the low cycle fatigue life of a welded structure, Materials science and engineering A, 2014, 595, p. 64-76
  • BONNET G., CORFDIR A., NGUYEN M.T., On the solution of exterior plane problems by the boundary element method : A physical point of view, Engineering analysis with boundary elements, 2014, 38, p. 40-48
  • BOURDIN B., MARIGO J.J., MAURINI C., SICSIC P., Morphogenesis and propagation of complex cracks induced by thermal shocks, Physical reviews letters, 2014, 112, 014301
  • CHATEAU C., GELEBART L., BORNERT M., CREPIN J., CALDEMAISON D., SAUDER C., Modeling of damage in unidirectional ceramic matrix composites and multi-scale experimental validation on third generation SiC/SiC minicomposites, Journal of the mechanics and physics of solids, 2014, 63, p. 298-319
  • CHOUMAN M., GAUBERT A., CHABOCHE J.L., KANOUTE P., CAILLETAUD G., et al., Elastic viscoplastic notch correction methods, International journal of solids and structures, 2014, 51, p. 3025-3041
  • DIRRENBERGER J., FOREST S., JEULIN D., Towards gigantic RVE sizes for 3D stochastic fibrous networks, International journal of solids and structures, 2014, 51, p. 359-376
  • DIVARET L., MOUSSOU P., BERLAND J., BERRO H., CADOT O., et al., Forced exerted on a cyclinder in near axial flow, Journal of pressure vessel technology, 2014 , 136, 051306
  • DIVARET L., CADOT O., MOUSSOU P., DOARE O., Normal forces exerted upon a long cylinder oscillating in an axial flow, Journal of fluid mechanics, 2014, 752, p. 649-669
  • ESNAULT J.P., DOQUET V., MASSIN P., A three dimensional analysis of fatigue crack paths in thin metallic sheets, International journal of fatigue, 2014, 62, p. 119-132
  • FAGIANO C., GENET M., BARANGER E., LADEVEZE P., Computational geometrical and mechanical modeling of woven ceramic composites at the mesoscale, Composite structures, 2014, 112, p. 146-156
  • GEERS M.G.D., COTTURA M., APPOLAIRE B., BUSSO E.P., FOREST S., et al., Coupled glide climb diffusion enhanced crystal plasticity, Journal of the mechanics and physics of solids, 2014, p. 136-153
  • GUINARD C., MONTAY G., GUIPONT V., JEANDIN M., GIRARDOT J., et al., Residual stress analysis of laser drilled thermal barrier coatings involving various bond coats, Journal of thermal spray technology, 2014, p. 252-262
  • GUMUCHIAN D., CAVADIAS S., DUTEN X., TATOULIAN M., DA COSTA P., OGNIER S., Organic pollutants oxidation by needle/plate plasma discharge : on the influence of the gas nature, Chemical engineering and processing : process intensification, 2014, 82, p. 185-192
  • JEHEL P., LEGER P., IBRAHIMBEGOVIC A., Initial versus tangent stiffness based Rayleigh damping in inelastic time history seismic analyses, Earthquake engineering and structural dynamics, 2014, 43, p. 467-484
  • LANOYE E., DORMIEUX L., KONDO D., A micromechanical based damage analysis of a cylindrical bar under torsion : theoretical results, finite elements verification and application, Theoretical and applied fracture mechanics, 2014, 74, p. 116-125
  • LE GUENNEC Y., COTTEREAU R., CLOUTEAU D., SOIZE C., A coupling method for stochastic continuum models at different scales, Probabilistic engineering mechanics, 2014, 37, p. 138-147
  • LE JOLU T., MORGENEYER T., DENQUIN A., SENNOUR M., LAURENT A., et al., Microstructural characterization of internal welding defects and their effect on the tensile behavior of FSW joints of AA2198 Al-Cu-Li alloy, Metallurgical and materials transactions A, 2014, 15, p. 5531-5544
  • LI J., FOREST S., CHIARUTTINI V., ROOS A., PROUDHON H., Crystal plasticity finite element simulation of crack growth in single crystals, Computational materials science, 2014, 94, p. 191-197
  • LUO Y.M., CHEVALIER L., MONTEIRO E., Basis for viscoelastic modelling of polyethylene terephthalate (PET) near Tg with parameter identification from multi-axial elongation experiments, International journal of material forming, 2014, 7, p. 359-367
  • MAUREL V., BUSSO E.P., FRACHON J., BESSON J., NGUYEN F., A methodology to model the complex morphology of rough interfaces, International journal of solids and structures, 2014, 51, p. 3293-3302
  • MONCHIET V., CHARKALUK E., KONDO D., Macroscopic yield criteria for ductile materials containing spheroidal voids : an Eshelby like velocity fields approach, Mechanics of materials, 2014, 72, p. 1-18
  • MONTEIL M., TOUZE C., THOMAS O., BENACCHIO S., Nonlinear forced vibrations of thin structures with tuned eigenfrequencies : the cases of 1:2:4 and 1:2:2 internal resonances, Nonlinear dynamics, 2014, 75, p. 175-200
  • MORGENEYER T., TAILLANDIER THOMAS T., HELFEN L., BAUMBACH T., SINCLAIR I, ROUX S., HILD F., In situ 3-D observation of early strain localization during failure of thin Al alloy (2198) sheet, Acta materialia, 2014, 69, p. 78-91
  • NEUKIRCH S., ANTKOWIAK S., MARIGO J.J., Soft beams : when capillarity induced axial compression, Physical review E, 2014, 89, 012401
  • PERRIN G., SOIZE C., DUHAMEL D., FUNFSCHILLING C., A posteriori error and optimal reduced basis for stochastic processed defined by a finite set of realizations, SIAM/ASA Journal of uncertainty quantification, 2014, 2, p. 745-762
  • SHEN W., HE Z., DORMIEUX L., KONDO D., Effective strength of saturated double porous media with a Drucker-Prager solid phase, International journal for numerical and analytical methods in geomechanics, 2014, 38, p. 281-296
  • SHEN W., LANOYE E., DORMIEUX L., KONDO D., Homogenization of saturated double porous media with Eshelby like velocity field, Acta geophysica, 2014, 62, p. 1146-1162
  • SICSIC P., MARIGO J.J., MAURINI C., Initiation of a periodic array of cracks in the thermal shock problem : a gradient damage modelling, Journal of the mechanics and physics of solids, 2014, 63, p. 256-284
  • TAILLANDIER THOMAS T., ROUX S., MORGENEYER T., HILD F., Localized strain field measurement on laminography data with mechanical regularization, Nuclear instruments and methods in physics research B, 2014, 324, p. 70-79
  • VILLANI A., BUSSO E.P., AMMAR K., FOREST S., GEERS M.G.D., A fully coupled diffusional mechanical formulation : numerical implementation, analytical validation, and effects of plasticity on equilibrium, Archive of applied mechanics, 2014, 84, p. 1647-1664
  • WANG L.L., POUYA A., BORNERT M., HALPHEN B., Modelling the internal stress field in argillaceous rocks under humidification/dessication, International journal for numerical and analytical methods in geomechanics, 2014, 38, p. 1664-1682
  • WANG L.L., BORNERT M., CHANCHOLE S., HERIPRE E., YANG D., Micromechanical experimental investigation of mudstones, Geotechnique letters, 2014, 4, p. 306-309
  • WANG L.L., BORNERT M., HERIPRE E., CHANCHOLE S., TANGUY A., Full field measurements on low strained geomaterials using environmental scanning electron microscopy and digital image correlation : improved imaging conditions, Strain, 2014, 50, p. 370-380
  • WANG L.L., BORNERT M., HERIPRE E., YANG D., CHANCHOLE S., Irreversible deformation and damage in argillaceous rocks induced by wetting/drying, Journal of applied geophysics, 2014, 107, p. 108-118


-  2013

  • AGE K., BOUTILLON X., REBILLAT M., Vibroacoustics of the piano soundboard : (Non)linearity and modal properties in the low- and mid-frequency ranges, Journal of sound and vibration, 2013, 332, p. 1288-1305
  • AYHAN B., JEHEL P., BRANCHERIE D., IBRAHIMBEGOVIC A., Coupled damage plasticity model for cyclic loading : theoretical formulation and numerical implementation, Engineering structures, 2013, 50, p. 30-42
  • BALDELLI A.A., BOURDIN B., MARIGO J.J., MAURINI C., Fracture and debonding of a thin film on a stiff substrate : analytical and numerical solutions of a one-dimensional variational model, Continuum mechanics and thermodynamics, 2013, 25, p. 243-268
  • BASSEVILLE S., PROUDHON H., HERIPRE E., CAILLETAUD G., Etude numérique des paramètres affectant les profiles d’usure en fretting, Matériaux et techniques, 2013, 101, 207, 13 p.
  • BOURCIER M., BORNERT M., DIMANOV A., HERIPRE E., RAPHANEL J., Multiscale experimental investigation of crystal plasticity and grain boundary sliding in synthetic halite using digital image correlation, Journal of Geophysical Research : Solid Earth, 2013, 118, p. 511-526
  • CARRIER B., WANG L., VANDAMME M., et al., ESEM study of the humidity-induced swelling of clay film, Langmuir, 2013, 29, p. 12823-12833
  • CORFDIR A., BONNET G., Degenerate scale for the Laplace problem in the half plane : approximate logarithmic capacity for two distant boundaries, Engineering analysis with boundary elements, 2013, 37, p. 836-841
  • DJAZIRI S., FAURIE D., LE BOURHIS E., GOUDEAU P., RENAULT P.O., MOCUTA C., THIAUDIERE D., HILD F., Deformation modes of nanostructured thin film under controlled biaxial deformation, Thin solid films, 2013, 530, p. 30-34
  • DOUMENC F., CHENIER E., TROUETTE B. et al., Free convection in drying binary mixtures : Solutal versus thermal instabilities, International journal of heat and mass transfer, 2013, 63, p. 336-350
  • EGE K., BOUTILLON X., REBILLAT M., Vibroacoustics of the pianon soundboard : (non)linearity and modal properties in the low and mid frequency ranges, Journal of sound and vibration, 2013, 332, p. 1288-1305
  • GERARD C., CAILLETAUD G., BACROIX B., Modeling of latent hardening produced by complex loading paths in FCC alloys, International journal of plasticity, 2013, 42, p. 194-212
  • HATTAB M., HAMMAD T., FLEUREAU J.M., HICHER P.Y., Behaviour of a sensitive marine sediment microstructural investigation, Geotechnique, 2013, 63, p. 71-84
  • HE Z., CARATINI G., DORMIEUX L., KONDO D., Homogenization of anisotropic elastoplastic behaviors of a porous polycrystal with interface effects, International journal for numerical and analytical methods in geomechanics, 2013, 37, p. 3213-3236
  • HE Z., DORMIEUX L., KONDO D., Strength properties of a Drucker-Prager porous medium reinforced by rigid particles, International journal of plasticity, 2013, 51, p. 218-240
  • LAUDARIN F., DESCELIERS C., BONNET G., ARGOUL P., A non-parametric probabilistic model for soil-structure interaction, Computational mechanics, 2013, 52, p. 53-64
  • LAVERGNE F., BRENNER R., SAB K., Effects of grain size distribution and stress heterogeneity on yield stress of polycrystals : A numerical approach, Computational materials science, 2013, 77, p. 387-398
  • LUO Y.M., CHEVALIER L., UTHEZA F., MONTEIRO E., Numerical simulation of the thermodependant viscohyperelastic behavior of polyethylene terephthalate near the glass transition temperature : prediction of the self-heating during biaxial tension test, Polymer engineering and science, 2013, 53, p. 2683-2695
  • MARCADON V., BROWN D., HERVE E., MELE P., ALBEROLA N.D., ZAOUI A., Confrontation between Molecular Dynamics and micromechanical approaches to investigate particle size effects on the mechanical behaviour of polymer nanocomposites, Computational materials science, 2013, 79, p. 495-505
  • MERHY E., REMY L., MAITOURNAM H., AUGUSTINS L., Crack growth characterisation of A356-T7 aluminum alloy under thermo-mechanical fatigue loading, Engineering fracture mechanics, 2013, 110, p. 99-112
  • MONCHIET V., KONDO D., Combined voids size and shape effects on the macroscopic criterion of ductile nanoporous materials, International journal of plasticity, 2013, 43, p. 20-41
  • MORGENEYER T., HELFEN L., MUBARAK H., HILD F., 3D digital volume correlation of synchrotron radiation laminography images of ductile crack initiation : an initial feasibility study, Experimental mechanics, 2013, 53, p. 543-556
  • NEUKIRCH S., ANTKOWIAK A., MARIGO J.J., The bending of an elastic beam by a liquid drop : A variational approach, Proceedings of the Royal society A : mathematical, physical and engineering sciences, 2013, 469, 2157, 20130066
  • PERRIN G., SOIZE C., DUHAMEL D., FUNFSCHILLING C., Karhunen-Loeve expansion revisited for vector-valued random fields : Scaling, errors and optimal basis, Journal of computational physics, 2013, 242, p. 607-622
  • PHAM K., MARIGO J.J., Stability of homogeneous states with gradient damage models : size effects and shape effects in the three-dimensional setting, Journal of elasticity, 2013, 110, p. 63-93
  • SZMYTKA F., MAITOURNAM M.H., REMY L., An implicit integration procedure for an elasto-viscoplastic model and its application to thermomechanical fatigue design of automotive parts, Computers and structures, 2013, 119, p. 155-165
  • WANG L., BORNERT M., CHANCHOLE S., et al, Micro-scale experimental investigation of the swelling anisotropy of the Callovo-Oxfordian argillaceous rock, Clay minerals, 2013, 48, p. 391-402
  • WANG L., BORNERT M., CHANCHOLE S., HERIPRE E., Experimental investigation of the free swelling of crushed argillite, Geotechnique letters, 2013, 3, p. 89-92
  • ZACCARDI C., CHAMOIN L., COTTEREAU R., BEN HHIA H., Error estimation and model adaptation for a stochastic-deterministic coupling method based on the Arlequin method, International journal for numerical methods in engineering, 2013, 96 p. 87-109


-  2012

  • ABRIVARD G., BUSSO E., FOREST S., APPOLAIRE B., Phase field modelling of grain boundary motion driven by curvature and stored energy gradients. Part I. theory and numerical implementation, Philosophical magazine A, 2012, 92, p. 3618-3642
  • ABRIVARD G., BUSSO E., FOREST S., APPOLAIRE B., Phase field modelling of grain boundary motion driven by curvature and stored energy gradients. Part II. Application to recrystallisation, Philosophical magazine A, 2012, 92, p. 3643-3664
  • BUI H.D., CONSTANTINESCU A., MAIGRE H., The inverse problem of seismic fault determination using part time measurements, Journal of mechanics of materials and structures, 2012, 7, p. 997-1007
  • GUILLEMER C., CLAVEL M., CAILLETAUD G., Modélisation du glissement cristallographique et du maclage dans le magnésium extrudé sous chargement cyclique, Revue de métallurgie, 2012, 109, p. 423-426
  • TRINH Duy Khanh, JANICKE R., AUFFRAY N., DIEBELS S., FOREST Samuel, Evaluation of generalized continuum substitution models for heterogeneous materials, Journal of multiscale computational engineering, 2012, 10, p. 527-549
  • WANG G., ZHAO H., BAI J., ZHAO Y.P., Fabrication and mechanical properties of a micro-nanoscale hybrid composite, International journal of nonlinear sciences and numerical simulations, 2012, 13, p. 153-157
  • Rousselier G., Luo M., Mohr D., Macroscopic plasticity modeling of anisotropic aluminum extrusions using a reduced texture methodology, International journal of plasticity, 2012, 30-31, p. 144-165
  • Benoit à la Guillaume A., Maitournam H., Rémy L., Oger F., Cyclic behaviour of structures under thermomechanical loadings : application to exhaust manifolds, International journal of fatigue, 2012, 38, p. 65-74
  • Fritzen F., Forest S., Bohlke T., Kondo D., Kanit T., Computational homogenization of elasto-plastic porous metals, International journal of plasticity, 2012, 29, p. 102-119
  • Forest S., Sab K., Stress gradient continuum theory, Mechanics research communications, 2012, 40, p. 16-25
  • Carrier B., Granet S., Numerical modeling of hydraulic fracture problem in permeable medium using cohesive zone model, Engineering fracture mechanics, 2012, 79, p. 312-328
  • Stolz C., Moes N., A new model of damage : a moving thick layer approach, International journal of fracture, 2012, 174, p. 49-60
  • Shen W.S., Lin J., Zhu QZ, Monchier V., Kondo D., Macroscopic yield criterions for ductile materials containing randomly oriented spheroidal, International journal of damage mechanics, 20, p. 1198-1216
  • Monchiet V., Gruescu C., Cazacu O., Kondo D., A micromechanical approach of crack induced damage in orthotropic media : application to a brittle matrix composite, Engineering fracture mechanics, 2012, 83, p. 40-53
  • Monchiet V., Kondo D., Exact solution of a plastic hollow sphere with a Mises-Schleicher matrix, International journal of engineering science, 2012, 51, p. 168-178
  • Cosson B., Chevalier L., Régnier G., Simulation of the stretch blow moulding process : from the modelling of the microstructure evolution to the end use elastic properties of polyethylene terephtahalate bottles, International journal of material forming, 2012, 5, p. 39-53


-  2011

  • Batou A., Soize C., Corus M., Experimental identification of an uncertain computational dynamical representing a family of structures, Computers and structures, 2011, p. 1440-1448
  • Shen W.S., Lin J., Zhu QZ, Monchier V., Kondo D., Macroscopic yield criterions for ductile materials containing randomly oriented spheroidal, International journal of damage mechanics, 20, p. 1198-1216
  • Dhia H.B., Torkhani M., Modeling and computation of fretting wear of structures under sharp contact, International journal for numerical methods in engineering, 2011, 85, p. 61-83
  • David B., Bonnefont-Rousselot D., Oudina K. et al., A perfusion bioreactor for engineering bone constructs : an in vitro and in vivo study, Tissue engineering, part C, methods, 2011, 17, p. 505-516
  • Renault P.O., Djaziri S., Le Bourhis E., Goudeau P. et al., Measurement of applied strains in thin films deposited on to polymer by synchrotron X ray diffraction, Procedia engineering, 2011, p. 2701-2706
  • Jus Y., Longatte E., Chassaing JC., Sagaut P., Vortex induced vibrations of an elastically mounted cylinder with low mass ration at re=3900, in : 4th international conference on computational methods for coupled problems in science and engineering, Coupled problems 2011, Kos, 20-22 juin 2011, 2011, p. 1007-1021
  • Monchiet V., Charkaluk E., Kondo D., A micromechanics based modification of the Gurson criterion by using Eshelby-like velocity fields, European journal of mechanics A, 2011, 30, p. 940-949
  • Monchiet V., Charkaluk E., Kondo D., A micromechanics based modification of the Gurson criterion by using Eshelby-like velocity fields, European journal of mechanics A, 2011, 30, p. 940-949


-  2010

  • Abdelmoula R., Marigo J.J., Weller T., Construction of fatigue laws from cohesive forces models : the mode I case, Comptes rendus – mécanique, 2010, 337, p. 166-172
  • Abdelmoula R., Marigo J.J., Weller T., Construction and justification of Paris-like fatigue laws from Dugdale-type cohesive models, Annals of solid and structural mechanics, 2010, 1, 3-4, p. 139-158
  • Besson J., Desmorat R., Lois de comportement pour les matériaux endommageables, in : Endommagement et rupture des matériaux 1, dir. M. Clavel, P. Bompard, 2009, Hermès, p. 295-338
  • Boittin G., Gallerneau F., Locq D., Kanoute P., Cailletaud G., Numerical modelling of the microstructure effect on fatigue behaviour of Ni-base superalloys for turbine disk, Technische Mechanik, 2010, 30, p. 15-28
  • Bornert M., Vales F., Gharbi H., Ngueyn Minh D., Multiscale full field strain measurements for micromechanical investigations of the hydromechanical behaviour of clayey rocks, Strain, 2010, 46, p. 33-46
  • Bouchelaghem F., Benhamida A., Quoc Vu H., Non linear mechanical behaviour of cemented soils, Computational materials science, 2010, 48, p. 287-295
  • Bui H.D., Oueslati A., On the stick-slip waves under unilateral contact and Coulomb friction, Annals of solid and structural mechanics, 2010, 1, p. 159-172
  • Bui H.D., Chaillat S., On a nonlinear inverse problem in viscoelasticity, Vietnam journal of mechanics, 2009, 31, p. 211-219
  • Cantournet S., Desmorat R., Besson J., Mullins effect and cyclic stress softening of filled elastomers by internal sliding and friction thermodynamics model, International journal of solids and structures, 2009, 46, p. 2255-2264
  • Chaillat S., Bui H.D., Resolution of linear viscoelastic equations in the frequency domain using real Helmholtz boundary integral equations, Comptes rendus Mecanique, 2007, 335 p. 746-750
  • Chambolle A., Francfort G.A., Marigo J.J., Revisiting energy release rates in brittle fracture, Journal of nonlinear science, 2010, 20, p. 395-424
  • Chateau C., Gélébart L., Bornert M., Crépin J., Caldemaison D., Multiscale approach of mechanical behaviour of SiC/SiC composites : elastic behaviour at the scale of the tow, Technische mechanik, 2010, 30 p. 45-55
  • Cordero N.M., Gaubert A., Forest S., Busso E.P., Gallerneau F. , Kruch S., Size effects in generalised continuum crystal plasticity for two-phase laminates, Journal of the mechanics and physics of solids, 2010, 58, p. 1963-1994
  • Corus M., Force identification using a statically completed reduced model deriving from tests, Journal of sound and vibration, 2010, 329, p. 4149-4165
  • Gelebart L., Chateau C., Bornert M., Crépin J., Boller E., X-ray tomographic characterization of the macroscopic porosity of chemical vapor infiltration SIC/SIC composites : effects on the elastic behavior, International journal of applied ceramic technology, 2010, 7, p. 348-360
  • Gérard C., Bacroix B., Bornert M., Cailletaud G., Crépin J. , Leclercq S., Hardening description for FCC materials under complex loading paths, Computational materials science, 2009, 45, p. 751-755
  • Hall S.A., Bornert M., Desrues J., Pannier Y. et al., Discrete and continuum analysis of localised deformation in sand using x-ray CT and volumetric digital image correlation, Géotechnique, 2010, 60, p. 315-322
  • Héripré E., Caldemaison D., Roos A., Crépin J., Microstrain analysis of titanium aluminides, Materials science forum, 2010, 638-642, p. 1330-1335
  • Héripré E., Crépin J., Roos A., Chaboche J.L., Influence of boundary conditions on strain field analysis for polycrystalline finite element simulations, European journal of computational mechanics, 2009, 18, p. 333-351
  • Mazière M., Forest S., Besson J., Wang H., Berdin C., Numerical simulation of the Portevin Le Chatelier effect in various materials and at different scales, Materials science forum, 2010, 638-642, p. 2670-2675
  • Pham K., Marigo J.J., The variational approach to damage I, the foundations, Comptes rendus – mécanique, 2010, 338, p. 191-198
  • Pham K., Marigo J.J., The variational approach to damage II, the gradient damage models, Comptes rendus – mécanique, 2010, 338, p. 199-206
  • Szmytka F., Rémy . L, Maitournam H., Koster A., Bourgeois M., New flow rules in elasto-viscoplastic constitutive models for spheroidal graphite cast iron, International journal of plasticity, 2010, 26, p. 905-924


-  2009

  • R. Bargellini, J. Besson, E. Lorentz, S. Michel-Ponnelle (2009) A non local finite element based on volumetric strain gradient : application to ductile fracture, Computational materials science, 2009, 45, p. 762-767(A, E)
  • C. Gérard, B. Bacroix, M. Bornert, G. Cailletaud, J. Crépin, S. Leclercq (2009) Hardening description for FCC materials under complex loading paths, Computational Material Science (F, G)
  • Z. Moumni, W. Zaki, H. Maitournam (2009) Cyclic behaviour and energy approach of the fatigue of Shape Memory Alloys, in press Journal of Mechanics of Materials and Structures, 25 (E)
  • V.U.Q. Huy, F. Bouchelaghem, B.H. Abdelwahed (2009) A micromechanical numerical modelling approach for the homogenisation of grouted sands, International journal of computer applications in technology, 2009, 34, p. 72-82 (F)
  • R. Abdelmoula, J.J. Marigo, T. Weller (2009) Construction of a fatigue law from a cohesive force model : the mode III case, Comptes rendus – Mécanique, 337, p. 53-59 (E)
  • L. Kubin, T. Hoc, B. Devincre (2009) Dynamic recovery and its orientation dependence in face-centered cubic crystals, Acta materialia, 2009, p. 2567-2575 (A)
  • H. Ferdjani, R. Abdelmoula, J.J. Marigo, S. El Borgi (2009) Study of size effects in the Dugdale model through the case of a crack in a semi-infinite plane under anti-plane shear loading, Continuum mechanics and thermodynamics, 21, p. 41-55 (E)
  • H. Amor, J.J. Marigo, C. Maurini (2009) Regularized formulation of the variational brittle fracture with unilateral contact : numerical experiments, Journal of the mechanics and physics of solids, 57, p. 1209-1229 (E)
  • C. Gérard, F. N’Guyen, N. Osipov, G. Cailletaud, M. Bornert, D. Caldemaison (2009) Comparison of experimental results and finite element simulation of strain localization scheme under cyclic loading, Computational materials science, 46, p. 755-760 (A)
  • K. Triconnet, K. Derrien, F. Hild, D. Baptiste (2009) Parameter choice for optimized digital image correlation, Optics and lasers in engineering, 47, p. 728-737 (G)
  • J. Belotteau, C. Berdin, S. Forest, A. Parrot, C. Prioul (2009) Mechanical behavior and crack tip plasticity of a strain aging sensitive steel, Materials Science & Engineering A, 526, p. 156-165 (E)


-  2008

  • S. Avril, M. Bonnet, A-S. Bretelle, M. Grédiac, F. Hild, P. Ienny, F. Latourte, D. Lemosse, S. Pagano, E. Pagnacco, F. Pierron (2008) Overview of identification methods of mechanical parameters based on full-field measurements. Experimental Mechanics, 48, p. 381-402 (G)
  • F. Szmytka, M. Bourgeois, T.M.L. Nguyen-Tajan, L. Rémy, A. Koster, H. Maitournam (2008) Development of a new model of élasto-visco-plasticity application to the fatigue design of an exhaust manifold of a diesel engine, Revue de métallurgie CIT, 105, p. 341-346 (E)
  • L. Kubin, B. Devincre, T. Hoc (2008) Modeling dislocation storage rates and mean free paths in face-centered cubic crystals, Acta materialia, 56, p. 6040-6049 (A, F)
  • Huy, V.U.Q., Abdelwahed, B.H., Bouchelaghem, F. (2008)A micromechanical numerical modelling approach for the homogenisation of grouted sands, Journal of Computer Applications in Technology, Volume 34, Issue 1, January 2009, Pages 72-82 (F)

Abdelmoula, R., J.-J.Marigo, Weller, T. (2008), Construction of a fatigue law from a cohesive force model : the mode III case, Comptes Rendus – Mecanique, in press (E)

  • M. Arnst, D. Clouteau, M. Bonnet (2008) Inversion of probabilistic structural models using measured transfer functions, Computer methods in applied mechanics and engineering, 197, 589-608 (G, B)
  • R. Desmorat, S. Cantournet (2008) Modeling microdefects closure effect with isotropic/anisotropic damage, International journal of damage mechanics, 17, 65-96 (E)
  • B. Devincre, T. Hoc, L. Kubin (2008) Dislocation mean free paths and strain hardening of crystals, Science, 320, 1745-1748 (A, F)
  • L. Kubin, B. Devincre, T. Hoc (2008) Toward a physical model for strain hardening in fcc crystals, Materials Science and Engineering A483-484, 19-24 (A, F)
  • E. Lorentz, J. Besson, V. Cano (2008) Numerical simulation of ductile fracture with the Rousselier constitutive law, Computer methods in applied mechanics and engineering, 197, 1965-1982 (A, E)
  • Z. Moumni, W. Zaki, Q.S. Nguyen (2008) Theoretical and numerical modeling of solid-solid phase change : Application to the description of the thermomechanical behavior of shape memory alloys, International Journal of Plasticity, Vol. 24:614-645 (A)
  • P. Peyre, P. Aubry, R. Fabbro, R. Neveu, A. Longuet (2008) Analytical and numerical modelling of the direct metal deposition laser process, Journal of physics D : applied physics, 41, 025403, 10 (A)
  • L. St-Pierre, E. Héripré, M. Dexet, J. Crépin, G. Bertolino, N. Bilger (2008) 3D simulations of microstructure and comparison with experimental microstructure coming from O.I.M analysis, International Journal of Plasticity, 24, 1516-1532 (G)
  • S. Caré, Q.T. Ngyuen, V. L’Hostis, Y. Berthaud (2008) Mechanical properties of the rust layer induced by impressed current method in reinforced mortar, Cement and Concrete Research, 38, 1079–1091, doi:10.1016/j.cemconres.2008.03.016 (F)

Retour haut de page


-  2007

  • I. Alfaro, J. Yvonnet, F. Chinesta, E. Cueto (2007) A study on the performances of natural-neighbour-based Galerkin methods, International Journal for Numerical Methods in Engineering, 71(12) 1436-1465 (A)
  • P. Badel, V. Godard, J.B. Leblond (2007) Application of some anisotropic damage model to the prediction of the failure of some complex industrial concrete structure, International Journal of Solids and Structures, 44, 5848-5874 (E)
  • S. Chaillat, H.D. Bui (2007) Resolution of linear viscoelastic equations in the frequency domain using real Helmholtz boundary integral equations, Comptes Rendus Mecanique, 335, 746-750 (A, G)
  • A. Corfdir, G. Bonnet (2007) Validity conditions of the direct boundary integral equation for exterior problems of plane elasticity, Comptes Rendus Mecanique, 335, 219-224 (G)
  • R. Cottereau, D. Clouteau, C. Soize (2007) Construction of a probabilistic model for impedances matrices, Computer Methods in Applied Mechanics and Engineering, 39(6), 831-838 (B)
  • R. Cottereau, D. Clouteau, C. Soize (2007) Parametric and nonparametric models of the impedance matrix of a random medium, European Journal of Computational Mechanics (B)
  • R. Cottereau, D. Clouteau, C. Soize (2007) Parametric and nonparametric probabilistic impedance of foundation : impact on the seismic design on uncertain soils, Earthquake Engineering and Structural Dynamics (B)
  • R. Desmorat, A. Kane, M. Seyedi, J.P. Sermage (2007) Two scale damage model and related numerical issues for thermo-mechanical high cycle fatigue, European Journal of Mechanics, 26, 909-935 (E)
  • B. Devincre, L. Kubin, T. Hoc (2007)Collinear superjogs and the low-stress response of fcc crystals, Scripta Materialia, 57, 905-908. (A, F)
  • P.E. Dumouchel, J.J. Marigo, M. Charlotte (2007) Rupture dynamique et fissuration quasi-statique instable, Comptes Rendus Mecanique, 708-713 (E)
  • N. Germain, J. Besson, F. Feyel, P. Gosselet (2007) High-performance parallel simulation of structure degradation using non-local damage models, International Journal for Numerical Methods in Engineering, 71, 253-276 (A, E)
  • E. Héripré, M. Dexet, J. Crépin, L. Gélébart, A. Roos, M. Bornert, D. Caldemaison (2007) Coupling between experimental measurements and polycrystal finite element calculations for micromechanical study of metallic materials, International Journal of Plasticity, 23, 1512–1539 (G)
  • A. Karrech, D. Duhamel, G. Bonnet, J. Canou, J.C. Dupla, J.N. Roux, F. Chevoir (2007) A computational procedure for the prediction of settlement in granular materials under cyclic loading, Computer Methods in Applied Mechanics and Engineering, 197, 80-94 (A)
  • S. Lefebvre, B. Devincre, T. Hoc (2007) Yield stress strengthening in ultrafine-grained metals : a two-dimensional simulation of dislocation dynamics, Journal of the Mechanics and Physics of Solids, 55, 788-802 (A, F)
  • V. Marcadon, E. Hervé, A. Zaoui (2007) Micromechanical modeling of packing and size effects in particulate composites, International Journal of Solids and Structures, 44 8213−8228 (F)
  • J.J. Marigo, A. Benallal (2007) Bifurcation and stability issues in gradient theories with softening. Modelling and Simulation in Materials Science and Engineering. Vol 15. Num 1. S283-S295 (A, E)
  • Q.T. Nguyen, S Caré, A. Millard, Y. Berthaud (2007) Analyse de la fissuration du béton armé en corrosion accélérée. Comptes Rendus Mecanique. Vol 335. Num 2, 99-104 (E)
  • R. Othman, G. Gary (2007) Testing aluminium alloy from quasi-static to dynamic strain rates with a modified split Hopkinson bar method, Experimental Mechanics, 47 295-299 (D)

Retour haut de page


-  2006

  • S. Andrieux, H.D. Bui (2006) Ecart à la réciprocité et identification de fissures en thermoélasticité isotrope transitoire, Comptes Rendus Mecanique, 334, 225-229, (G)
  • M. Arnst, D. Clouteau, H. Chebli, R. Othman and G. Degrande (2006) A non-parametric probabilistic model for ground-borne vibrations in buildings, Journal of Probabilistic Engineering Mechanics, vol. 21, num. 1, 18-34 (B)
  • A. Bastier, H. Maitournam, K. Dang Van and F. Roger (2006) Steady state thermomechanical modelling of friction stir welding, Science and Technology of Welding and Joining, Vol. 11:278-288 (A)
  • A. Bastier, H. Maitournam, K. Dang Van and F. Roger (2006) Modélisation numérique du Friction Stir Welding, Revue Européenne des Eléments Finis, Vol. 15(1-2-3) (A)
  • T. Bretheau, O. Castelnau (2006) Les contraintes résiduelles : d’où viennent-elles ? Comment les caractériser ? Rayons X et Matière (RX2006), Chap. 5 (p. 123-154), Ed. R. Guinebretière, P. Goudeau, Hermès (F)
  • O. Castelnau, P. Goudeau, G. Geandier, N. Tamura, J.L. Béchade, M. Bornert, D. Caldemaison (2006) White beam microdiffraction experiments for the determination of the local plastic behaviour of polycrystals, Materials Science Forum, 524-525, 103-108 (F, G)
  • M. Charlotte, J. Laverne, J.J. Marigo (2006) Initiation of cracks with cohesive force models : a variational approach, European Journal of Mechanics, 25, 649-669 (E)
  • B. Devincre, L. Kubin, T. Hoc (2006) Physical analyses of crystal plasticity by DD simulations, Scripta Materialia, Volume 54, Issue 5, 741-746 (A, F)
  • L. P. Kubin, B. Devincre, T. Hoc (2006)Inhibited dynamic recovery and screw dislocation annihilation in multiple slip of fcc single crystals, Philosophical Magazine, 86 , 4023-4036 (A, F)
  • A. Phelippeau, S. Pommier, T. Tsakalakos, M. Clavel, C. Prioul (2006) Cold drawn steel wires—processing, residual stresses and ductility Part I : Metallography and finite element analyses Fatigue & Fracture of Engineering Materials and Structures, 29, 3, 242-253 (A, E)
  • A. Phelippeau, S. Pommier, I. Zakharchenko, R. Levy-Tubiana, T. Tsakalakos, M. Clavel, M. Croft, Z. Zhong, C. Prioul (2006) Cold drawn steel wires—processing, residual stresses and ductility Part II : Synchrotron and neutron diffraction, Fatigue & Fracture of Engineering Materials and Structures, 29, 3, 255-265 (E, G)
  • M. Seyedi, S. Taheri, F. Hild (2006) Numerical modeling of crack propagation and shielding effects in a stripting network, Nuclear Engineering and Design, 236, 954-964 (E)
  • S. Woestyn, A. Delaplace, P. Koechlin (2006) Analyse de la rupture fragile du béton par un modèle discret, Revue Européenne de Génie Civil, Vol. 10, 10, 1281-1308 (E)
  • Q.T. Nguyen, A. Millard, S. Caré, V. L’Hostis, Y. Berthaud (2006) Fracture of concrete caused by the reinforcement corrosion products, Journal de Physique IV, 136, 109-120 (E)
  • A. Ouglova, M. François, Y. Berthaud, S. Caré and F. Foct (2006) Mechanical properties of an iron oxide formed by corrosion in reinforced concrete structures, Journal de Physique IV ,136,99-107 (F)

Retour haut de page


-  2005

  • B. Devincre, T. Hoc, L. P. Kubin (2005) Collinear interactions of dislocations and slip systems, Materials Science and Engineering A400-401, 182-185 (A, F)
  • S. Graff, S. Forest, J.L. Strudel, P. Pilvin, C. Prioul, J.L. Béchade (2005) Finite element simulations of dynamic strain ageing effects at V-notches and crack tips. Scripta Materialia, 52, 1181-1186 (F, E)
  • R. A. Lebensohn, O. Castelnau, R. Brenner, P. Gilormini (2005) Study of the antiplane deformation of linear 2-D polycrystals with different microstructures, International Journal of Solids and Structures, 42, 5441-5459 (F)
  • S. Lefebvre, B. Devincre, T. Hoc (2005) Simulation of the Hall–Petch effect in ultra-fine grained copper, Materials Science and Engineering A, 400-401, 150-153 (A, F)
  • E. Lorentz, A. Benallal (2005) Gradient constitutive relations : numerical aspects and application to gradient damage, Computer Methods in Applied Mechanics and Engineering, 194, 5191-5220 (A, E)
  • Q.S. Nguyen, S. Andrieux (2005) The non-local generalized standard approach : a consistent gradient theory, Comptes Rendus Mecanique, 333, 139-145 (A)
  • S. Pommier, M. Risbet (2005) Time derivative equations for mode I fatigue crack growth in metals, International Journal of Fatigue, 27, 1297-1306 (E)
  • Liu, Y., Gilormini, P. Ponte Castañeda, P (2005) Homogenization estimates for texture evolution in halite, Tectonophysics Volume 406, Issue 3-4, 9 September 2005, Pages 179-195 (F)

Retour haut de page


-  2004

  • N. Carrere, R. Valle, T. Bretheau, J.L. Chaboche (2004) Multiscale analysis of the transverse properties of Ti-based matrix composites reinforced by SiC fibres : from the grain scale to the macroscopic scale, International Journal of Plasticity, 20, 783-810 (F)
  • C. Berdin, J. Besson, S. Bugat, R. Desmorat, F. Feyel, S. Forest, E. Lorentz, E. Maire, T. Pardoen, A. Pineau, B. Tanguy (2004) Local approach to fracture, Editeur J. Besson, Presses de l’Ecole des Mines (E)
  • M. Bornert, J.M. Chaix, P. Doumalin, J.C. Dupré, T. Fournel, D. Jeulin, E. Maire, M. Moreaud et H. Moulinec (2004) Mesure tridimensionnelle de champs cinématiques par imagerie volumique pour l’analyse des matériaux et des structures, Instrumentation, Mesure, Métrologie, Vol 4 n° 3-4, 43-88 (G).
  • S. Forest, E. Lorentz (2004) Localization and regularization, Local Approach to Fracture, ed J. Besson, Presses de l’Ecole des Mines de Paris (E)
  • P. Gosselet, V. Chiaruttini, C. Rey, F. Feyel (2004) A Monolithic strategy based on an hybrid domain decomposition method for multiphysic problems. Application to poroelasticity. European Journal of Computational Mechanics, 13, 523-534 (A)
  • S. Graff, S. Forest, J.L. Strudel, C. Prioul P. Pilvin, J.L. Béchade (2004) Strain localization phenomena associated with static and dynamic strain ageing in notched specimens : experiments and finite element simulations. Materials Science and Engineering, 387, 181-185 (F)
  • A. Roos, J.L. Chaboche, L. Gélébart, J. Crépin (2004) Multiscale modelling of titanium aluminides, International Journal of Plasticity, 20, 811-830 (A, F)
  • A. Tcharkhtchi, F. Chinesta, E. Perrot (2004) Simulation of thermal phenomena on the interface molten polymer during rotational molding, International Polymer Process, 19, 296-302 (A)

Retour haut de page


-  2003

  • R. Brenner, O. Castelnau, P. Gilormini (2003) The modified affine homogenisation scheme for nonlinear composites : Comparison with variational bounds and estimates, Journal of Physics Phys. IV, 105, 107-113 (F)
  • G. Cailletaud, S. Forest, D. Jeulin, F. Feyel, I. Galliet, V. Mounoury, S. Quilici (2003) Some elements of microstructural mechanics, Computational Materials Science, 27, 351-374 (A, F)
  • T. Hoc, J. Crépin, L. Gélébart, A. Zaoui (2003) A procedure for identifying the plastic behavior of single crystals from the local response of polycrystals, Acta Materialia, 51, 5479-5490 (G)
  • R. Madec, B. Devincre, L. P. Kubin, T. Hoc, D. Rodney (2003) The role of collinear interaction in dislocation-induced hardening, Science, 301, 1879-1882 (A, G)

Retour haut de page